Hybrid Channel- and Coding-Based Challenge-Response Physical-Layer Authentication

Laura Crosara, , Mahtab Mirmohseni, , and Stefano Tomasin · 2025

Read Hybrid Channel- and Coding-Based Challenge-Response Physical-Layer Authentication by Laura Crosara, , Mahtab Mirmohseni, , and Stefano Tomasin (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-17476.txt.

Introduction

Laura Crosara, Mahtab Mirmohseni, and Stefano Tomasin propose a hybrid way to verify wireless senders at the signal level, in work from 2025. Faking a sender is a core risk in wireless links. Checks that use both the channel and a shared secret can be stronger than either alone.

The receiver partly steers the channel, for instance with a smart reflecting surface. It then sends a random channel setup as a challenge. A valid sender must answer with a coded key that fits that exact channel state. Coding hides the key from eavesdroppers at the same time. The letter weighs how pilot signals for channel reading trade against key length.

Catalog record

CREATORLaura Crosara, , Mahtab Mirmohseni, , and Stefano Tomasin
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-17476

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hybrid Channel- and Coding-Based Challenge-Response Physical-Layer Authentication Laura Crosara, , Mahtab Mirmohseni, , and Stefano Tomasin Abstract This letter proposes a new physical layer authentication mechanism operating at the physical layer of a communication system where the receiver has partial control of the channel conditions (e.g., using an intelligent reflecting surface). We aim to exploit both instantaneous channel state information (CSI) and a secret shared key for authentication. This is achieved by both transmitting an identifying key by wiretap coding (to conceal the key from the attacker) and checking that the instantaneous CSI corresponds to the channel configuration randomly selected by the receiver. We investigate the trade-off between the pilot signals used for CSI estimation and the coding rate (or key length) to improve the overall security of the authentication procedure. I Introduction Source authentication mechanisms aim to determine whether a message received truly comes from the declared sender or has been falsified by an attacker. For physical layer authentication (PLA) , two main approaches are available, denoted here as coding-based PLA and tag-based PLA . The coding-based PLA mechanism involves the use of wiretap coding [ 1 ] . The verifier and the legitimate transmitter share a key to remain secret to the attacker. The key is used as the secret message in a wiretap-coding transmission from the legitimate transmitter. The verifier checks that the received secret message corresponds to the shared key. The tag-based PLA mechanism [ 2 ] is based on the channel state information (CSI) and includes the two phases of acquisition and verification. In the acquisition phase, the verifier estimates the CSI from the legitimate source. In the verification phase, upon reception of a message, the verifier estimates the CSI and compares it to that obtained in the acquisition phase. The message is considered authentic when the two estimates match. Tag-based PLA has been applied to technologies such as orthogonal frequency division multiplexing (OFDM) , multiple-input multiple-output (MIMO) [ 3 , 4 ] , and underwater acoustic networks [ 5 ] . The Neyman-Pearson test [ 6 ] and machine learning classifiers [ 7 ] have been used for verification. See [ 8 ] and [ 9 ] for a comprehensive review. Recent evolution of PLA leverages partially controllable channels (PCCs) , i.e., channels partially controlled by the receiver through a modification (configuration) of the signal propagation environment, e.g., using a intelligent reflecting surface (IRS) to steer wireless signals. Even this mechanism includes two phases. In the first, the verifier obtains estimates of the channel associated with all possible configurations of the propagation environment. In the second, the verifier sets a random configuration and, upon receiving a message, estimates the channel and checks its consistency with the channel predicted from the estimates of the first phase [ 10 ] . The mechanism is denoted as channel-based challenge response (CR) - PLA as it mimics the CR authentication mechanisms using cryptographic primitives. In this letter, we propose a hybrid PLA mechanism that combines channels- and coding-based PLA mechanisms. The two mechanisms intersect in their use of pilot and data symbols. An increased number of pilot symbols benefits the channel-based mechanism, while a higher data-to-pilot ratio favors the coding-based mechanism. Thus, we analyze the trade-off between the amount of transmitted data and pilot symbols. Subsequently, we assess the security of the channel-based, coding-based, and hybrid PLA mechanisms in terms of bits that the attacker must know to deliver a successful attack. Another key contribution of this letter is the introduction of the following features for existing schemes: (a) the consideration of multiple channel configurations in CR - PLA , and (b) the incorporation of finite-length coding in coding-based PLA . Additionally, for the hybrid PLA analysis, we extend the existing coding-based PLA framework to account for block-fading channels. Our study demonstrates that the hybrid PLA mechanism offers improved authentication capabilities over each existing mechanism, particularly when the attacker’s channel signal-to-noise ratio (SNR) is significantly lower than that of the nominal channel. The rest of this letter is organized as follows. Section II presents the system model. The proposed mechanism is introduced in Section III . Section IV provides the analytical framework for evaluating the security properties of the system. Then, Section V presents the numerical results. Finally, Section VI concludes the letter. II System Model Fig. 1: Considered communication model. We consider the uplink wireless transmission scenario of Fig. 1 , where a receiver Bob aims at authenticating messages coming from a legitimate transmitter Alice. An intruder Trudy, in turn, aims at impersonating Alice, transmitting fake (spoofing) messages to Bob. We consider a single-antenna setup for Alice, Bob, and Trudy, while an extension to a multi-antenna scenario is possible. We assume that the signal transmitted by Alice x^{(t)} at discrete time t is zero-mean Gaussian with unit power. II-A Channel Model A PCC supports the communication between Alice and Bob [ 10 ] . Bob can adjust certain channel properties by selecting a channel configuration \phi via a dedicated channel that Trudy cannot access. For example, a PCC can be implemented with an IRS , which reflects radio signals with adjustable phases. A specific configuration is achieved by setting the phase shift values of the IRS elements. However, in this letter, we consider a generic controllable channel, without explicit reference to IRSs. At symbol time t of the considered single-input-single-output (SISO) additive white Gaussian noise (AWGN) model, let h(\phi) be the (real) amplitude of the channel from Alice to Bob when configuration \phi is used and w^{(t)}_{\mathrm{B}} be the complex circularly symmetric AWGN term with zero mean and variance \sigma^{2}_{\rm B} . For the transmission of n complex symbols x^{(t)} , t=1,\ldots,n , the input-output relation with IRS configuration \phi is 1 1 1 We assume here the phase of the resulting channel cannot be controlled by Bob as it is also related to synchronization issues that are not easily controllable. y^{(t)}=h(\phi)e^{j\theta}x^{(t)}+w^{(t)}_{\mathrm{B}},\quad t=1,\ldots,n, (1) where \theta is a random phase introduced by the channel, independent from \phi . The legitimate channel SNR is maximized when the communication-optimal configuration is selected. When Bob chooses a configuration that deviates from the communication-optimal one, the legitimate channel SNR decreases. We assume that the selected configuration is close to the communication-optimal one, ensuring that the channel’s amplitude h(\phi) satisfies h_{\rm MIN}\leq h(\phi)\leq h_{\rm MAX}\,, (2) where h_{\rm MAX} is the channel obtained with the communication-optimal (maximum SNR ) configuration, while h_{\rm MIN} is the minimum amplitude achieved with the configuration leading the worse channel. We further assume that for each h\in[h_{\rm MIN},h_{\rm MAX}] there is at least one configuration \phi that satisfies h(\phi)=h . The input-output relation of the Alice-Trudy channel, which is not controllable by Bob, is z^{(t)}=Ue^{j\theta^{\prime}}x^{(t)}+w^{(t)}_{\mathrm{T}},\quad t=1,\ldots,n, (3) where w^{(t)}_{\mathrm{T}} follows a zero-mean Gaussian distribution with variance \sigma^{2}_{\rm T} , and \theta^{\prime} is a random phase introduced by the channel. We define \Lambda_{\rm B}=1/\sigma^{2}_{\rm B} and \Lambda_{\rm T}=U^{2}/\sigma^{2}_{\rm T} . II-B Attack Model Trudy does not know \phi and, consequently, h(\phi) , but is aware of h_{\rm MAX} and h_{\rm MIN} . To consider the worst-case scenario we assume that Trudy can induce any channel estimate a at Bob and, when Trudy attacks, the received signal is noiseless,

Read the complete text