Consistent continuum equations and numerical benchmarks for a perturbation-based, variable-coefficient acoustofluidic solver

Khemraj Gautam Kshetri, Amneet Pal Singh Bhalla, Nitesh Nama · 2025

Read Consistent continuum equations and numerical benchmarks for a perturbation-based, variable-coefficient acoustofluidic solver by Khemraj Gautam Kshetri, Amneet Pal Singh Bhalla, Nitesh Nama (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-17398.txt.

Introduction

Khemraj Gautam Kshetri, Amneet Pal Singh Bhalla, and Nitesh Nama build a consistent solver for sound-driven fluid flow in this 2025 paper. Acoustofluidics uses sound waves to stir tiny fluid streams. Past simulations often paired equations with boundary rules that did not truly match.

Their framework splits the flow into a fast harmonic part and a slow mean part. Two equal forms of the mass balance are spelled out to clear old confusion. The split also clarifies how drift and transport speeds relate. A careful grid scheme then solves both parts with matched boundary rules. Benchmark tests confirm the code hits its claimed accuracy on both halves of the problem.

Catalog record

CREATORKhemraj Gautam Kshetri, Amneet Pal Singh Bhalla, Nitesh Nama
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE101 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-17398

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Consistent continuum equations and numerical benchmarks for a perturbation-based, variable-coefficient acoustofluidic solver Khemraj Gautam Kshetri, Amneet Pal Singh Bhalla, Nitesh Nama Abstract We present a consistent continuum framework and a variable-coefficient acoustofluidic solver to analyze acoustic streaming. A perturbation approach is used to split the compressible Navier-Stokes equations into two sub-systems: a first-order harmonic system and a time-averaged second-order mean system. Prior acoustofluidic numerical studies have typically employed simplifying assumptions regarding the second-order mass balance equation and boundary conditions. These assumptions—frequently left unjustified—result in an incongruent problem statement where the boundary conditions are not consistent with the governing equations. To clarify these assumptions and mitigate the associated confusion, we systematically formulate the second-order mass balance equation into two analytically equivalent but numerically distinct forms by introducing the fluid’s Lagrangian and mass transport velocity. We clarify the relation between these quantities to illustrate that a zero mass transport velocity does not necessarily imply a zero Lagrangian velocity. A second-order accurate finite difference/volume scheme is used to discretize the governing equations and boundary conditions expressed in Eulerian form. We solve the first-order coupled Helmholtz system via a sparse direct solver while the second-order system is solved via a Krylov (FGMRES) solver with a projection method-based preconditioner. To ascertain the spatial accuracy and consistency of numerical implementation of the split system of equations and boundary conditions, we demonstrate verification results and convergence rates using manufactured solutions. We provide benchmark test cases to demonstrate that the choice of boundary conditions and the oscillation profile of the microchannel wall can, in general, strongly impact the second-order flow field. Lastly, we examine a system with spatially varying density to illustrate the difference in flow fields between constant and variable density systems. 1 Introduction In recent years, acoustofluidics has emerged as an innovative technology for a variety of lab-on-a-chip applications Laurell and Lenshof [2014] , Ding et al. [2013] , Durrer et al. [2022] , Wei et al. [2023] . In acoustofluidic systems, high-frequency acoustic waves interact nonlinearly with viscous fluids. The result of these interactions is not just a high-frequency oscillatory response of the fluid, but also a mean flow called acoustic streaming. Acoustic streaming has recently been used to enable fast, microscale fluid mixing and pumping—two tasks that are otherwise difficult to accomplish at small scales because of the low Reynolds number Huang et al. [2015] , Ahmed et al. [2013] , JunáHuang et al. [2014] , Huang et al. [2013] , Ozcelik et al. [2014] , Pavlic et al. [2023] . While acoustic streaming has been a subject of scientific investigations dating back to the 18^{\textrm{th}} century, its merger with microfluidics, and associated applications for lab-on-a-chip systems, has led to a renewed interest in understanding nonlinear fluid-acoustic interactions Beyer [1999] , Friend and Yeo [2011] . There have been several numerical studies recently to model microscale acoustofluidic phenomena Nama et al. [2014] , Nama et al. [2015] , Muller et al. [2013] , Devendran et al. [2022] , Vanneste and Bühler [2011] , Orosco and Friend [2022] , Lei et al. [2017] , Baasch and Dual [2018] , Sankaranarayanan et al. [2008] . Nyborg’s perturbation approach is typically employed in these studies to separate the fluid response into a first-order oscillating and a second-order mean component. As a result of this approach, there are two sets of linear equations: the first-order system describing the fluid’s oscillatory response, and the second-order system describing its mean response. Considering that fluid compressibility is a prerequisite for acoustic wave propagation, most of these studies begin with compressible Navier-Stokes equations. The perturbation expansion of compressible Navier-Stokes equations results in a time-averaged mass source term for the second-order system. Since most acoustofluidic systems are characterized by low Mach numbers (i.e., with characteristic streaming velocities that are small comparable to the speed of sound), the second-order mass source is sometimes overlooked Lei et al. [2017] , Sankaranarayanan et al. [2008] , Devendran et al. [2014] . While this is not problematic in isolation, neglecting a mass source while employing a non-zero Eulerian velocity boundary condition at the oscillating boundaries of the computational domain can, in general, result in situations where the boundary conditions are inconsistent with the governing equations Baasch et al. [2020] . However, for certain types of wall actuation, the mass source term has little impact and numerical solvers often produce seemingly-correct solutions despite this inconsistency. Alternatively, some studies retain the mass source term, but prescribe zero-velocity boundary condition at the mean position of the oscillating boundary Nama et al. [2015] , Muller et al. [2012] , Das et al. [2019] , Ghorbani Kharaji et al. [2022] . Again, this can, in general, lead to an incongruent problem statement if the boundary conditions are not in agreement with the governing equations. A related issue in modeling acoustofluidic systems is determining appropriate boundary conditions for the oscillating boundary of the second-order system. In previous studies, different boundary conditions were prescribed for the mean flow at the oscillating wall. In some studies, the oscillating wall is assigned a zero Eulerian velocity Nama et al. [2015] , Muller et al. [2012] , Das et al. [2019] , Ghorbani Kharaji et al. [2022] , while in others, a zero mass transport velocity Das and Bhethanabotla [2022] , Muller and Bruus [2014] , Muller and Bruus [2015] or a zero Lagrangian velocity is prescribed Kshetri and Nama [2023] , Kshetri and Nama [2024] , Baasch et al. [2019] , Pavlic et al. [2022] . In general, these velocities represent distinct quantities that are not identical. While this issue was discussed by Bradley et al. Bradley [1996] , some subsequent studies that neglected this distinction still produced results that matched experimental observations Muller et al. [2013] , Nama et al. [2016] ; this has resulted in proliferation of numerical models where contradictory boundary conditions continue to be employed and justified by referencing prior numerical reports. A lack of rigorous benchmarking problems in computational acoustofluidic studies further exacerbates this confusion. In most studies, the numerical implementations are benchmarked against Muller et al. Muller et al. [2012] , Muller et al. [2013] . Acoustofluidic setups discussed in Muller et al. [2012] , Muller et al. [2013] consider uniform rectilinear oscillations of the channel boundary, and are insensitive to the inconsistencies discussed above. As such, the applicability of a numerical implementation, compared against Muller et al. Muller et al. [2012] , Muller et al. [2013] , remains unclear for general oscillations of the boundary. Further, the validity of numerical acoustofluidic models is often assessed by how well it reproduces previous numerical results from the literature. The accuracy of the implementation and convergence rates associated with it are rarely reported using formal numerical implementation verification techniques such as the method of manufactured solutions. As noted above, for certain wall oscillation profiles and parameter ranges, the numerical solver can converge despite the inherent inconsistencies in the problem statement. As such, these inconsistencies—that can be highlighted through formal numerical verification techniques—remain undiscussed leading to unclear implications concerning the general applicability of these models. We aim to provide a quantitative benchmark for test cases that are sensitive to boundary conditions in this work. Most numerical studies on acoustofluidic systems assume a spatially

Read the complete text