Static and Dynamic Torque Generation Analysis of a Cable-Actuated Solar Sail

Keegan R. Bunker, Ryan J. Caverly · 2025

Read Static and Dynamic Torque Generation Analysis of a Cable-Actuated Solar Sail by Keegan R. Bunker, Ryan J. Caverly (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-17336.txt.

Introduction

Keegan Bunker and Ryan Caverly analyzed this 2025 design for steering a solar sail by tugging its own cables. A solar sail rides on sunlight pressure. The concept studied here threads cables along the flexible booms that hold the sail film. Tightening a cable bends its boom, which tilts parts of the sail and unbalances the light push.

That imbalance creates turning torque the sail can use to manage its spin and aim. Simulations show large torques are within reach. The authors compare the approach with the current method, which slides a mass inside the craft. Their tests also show steady torque even when the sail's exact shape is uncertain. An appendix derives the full motion model behind the study.

Catalog record

CREATORKeegan R. Bunker, Ryan J. Caverly
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE94 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-17336

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Static and Dynamic Torque Generation Analysis of a Cable-Actuated Solar Sail Keegan R. Bunker, Ryan J. Caverly Abstract 1 Introduction S olar sails are large space structures consisting of a lightweight sail that utilizes solar radiation pressure (SRP) to produce usable thrust for a spacecraft without requiring fuel of any kind. Though small, this thrust can be used over long durations to enable unique spacecraft mission designs, including interstellar missions [ 1 ] and orbits out of the ecliptic plane [ 2 , 3 ] . If chemical fuel is not used for any other systems onboard the spacecraft, a solar sail can increase the spacecraft operational life span immensely. LightSail 2 showed the potential of solar sails [ 4 ] , raising its orbital altitude in low Earth orbit from the thrust generated by the sail over the course of its mission. The space community continues to see value in developing solar sails further, as seen by the launch of the Advanced Composite Solar Sail System (ACS3) technology exploration mission into low Earth orbit in to test novel solar sail boom technologies [ 5 ] . Attitude control of solar sails is key to meeting mission requirements, motivating most previous and proposed missions to use reaction wheels as actuators. A typical solar sail attitude control system with reaction wheels includes spinning metal wheels onboard the spacecraft that can generate torques along any direction through the conservation of angular momentum by altering their spin rate. The spin rate has a limited operating range, so another actuator is required to apply a net torque to the spacecraft and allow the reaction wheel speeds to be adjusted without affecting the attitude. This capability is called momentum management. The momentum management requirements will become more challenging as solar sails of substantially larger size are considered for future missions [ 2 , 6 ] , thus requiring larger reaction wheels. Moreover, larger solar sails will likely have more structural flexibility [ 7 , 8 , 9 ] , resulting in unwanted structural deformations and significant disturbance torques due to imbalances in SRP [ 10 ] . Spacecraft missions outside of low Earth orbit typically rely on attitude control system (ASC) thrusters for momentum management, which has also been proposed for solar sails [ 11 , 12 ] . ACS thrusters use chemical propulsion to apply thrust and generate net torques on the spacecraft. ACS thrusters negate the fuel-free benefits of a solar sail and limit the operational life of a solar sail spacecraft. Several alternative technologies have been investigated to address solar sail momentum management demands without fuel. An effective means to generate momentum management torques that has been extensively explored involves shifting the solar sail’s center of mass using an onboard translation mechanism [ 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 ] . NASA’s Solar Cruiser is equipped with a version of this known as an active mass translator (AMT), which allows for the relative displacement of the upper and lower halves of the solar sail bus [ 11 ] . The AMT is capable of generating torques by displacing the center of mass relative to the center of SRP in two axes for momentum management, although it is unclear how this technology will scale up to solar sails with much larger areas due to limits in its range of actuation. Gimbaled ballast masses have also been proposed as a means to shift the solar sail’s center of mass using a similar concept [ 20 , 21 ] , however, they have remained largely theoretical and may increase the overall mass of the solar sail if the added mass is truly ballast. A variety of concepts involving adjusting the reflectivity properties of portions of the solar sail in order to generate a torque through an imbalance in SRP [ 22 , 23 , 24 , 25 , 26 ] have been proposed. This concept is being considered for use on Solar Cruiser in the form of reflectivity control devices (RCDs) angled from the normal of the solar sail membrane to generate torques out of the plane of the sail [ 11 ] . Although this is a promising technology, it produces relatively small torques and comes with the challenge of providing power to devices far from the solar sail bus. Control vanes at the tips of the solar sail’s structural booms have been proposed as a means to generate torques similar to the control surfaces on an aircraft [ 27 , 28 , 29 , 30 , 31 ] . Unfortunately, a significant challenge in the use of control vanes is actuating them (most likely with some sort of motor) at the end of long, flexible booms. The control vanes also need to have significant area in order to generate significant torques. In an effort to generate large torques with minimal actuation, it has been proposed to angle the panels of a solar sail [ 32 , 33 ] . Although this can create large changes in torques, it is only effective when fairly rigid solar sail panels/membranes are used and does not scale well to large lightweight sails. A more practical adaptation of this for large solar sails is the idea of actively shifting the attachment point of the sail membrane quadrant at the end of the boom tip [ 34 ] . This can provide large changes in torque, although this also features the challenge of actuation far from the spacecraft bus and can significantly reduce the SRP thrust during actuation. A more detailed description of many of these actuators and other concepts can be found in [ 1 , 35 ] . The Cable-Actuated Bio-inspired Elastic Solar Sail (CABLESSail) concept, shown in Fig. 1 , utilizes controlled deformation of the solar sail’s flexible boom structure to change the shape of the sail membrane and produce usable momentum management torques from a differential in SRP. In a sense, CABLESSail aims to transform the undesirable flexible deformations of large solar sails into controlled desirable deformations to generate usable momentum management torques. Several cables run from the spacecraft bus along each boom, through spreader plates affixed to the booms at set increments, and are fastened to a plate at the end of each boom. Winches within the spacecraft bus pull on these cables to apply tension, which deforms the booms. With coordinated bending, an SRP differential on the sail can generate usable momentum management torques, which is demonstrated in Fig. 2 . The torques generated inherently scale with the size of the solar sail, since the deflection of the sail is used to create these torques, without the need for chemical fuel. Further details on the preliminary concept behind the CABLESSail technology can be found in [ 36 ] . This technology shares similarities with the concept in [ 37 , 38 ] that involves the use of piezoelectric actuation to purposefully deform the solar sail’s booms. A major distinction between the CABLESSail concept and the concept in [ 37 , 38 ] is that cable actuation has the ability to generate much more substantial boom deformations. Additionally, CABLESSail’s actuating cables can hold the boom

Read the complete text