Generation of Deep Ultraviolet Optical Vortices via Amplitude and Phase Spiral Zone Plates

A.S. Dyatlov, M.A. Nozdrin, A.N. Sergeev, N.E. Sheremet, S.S. Stafeev, D.V. Karlovets · 2025

Read Generation of Deep Ultraviolet Optical Vortices via Amplitude and Phase Spiral Zone Plates by A.S. Dyatlov, M.A. Nozdrin, A.N. Sergeev, N.E. Sheremet, S.S. Stafeev, D.V. Karlovets (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-16950.txt.

Introduction

Dyatlov, Nozdrin, Sergeev, and three colleagues build optical elements that twist deep ultraviolet light into vortex beams, in a paper published in two thousand twenty-five. A vortex beam carries orbital angular momentum, its wavefront spiraling like a corkscrew, and making such beams gets harder at short wavelengths.

The team fabricated spiral zone plates, in both amplitude and phase versions, using advanced lithography and etching. The plates reshape an ordinary Gaussian beam into a twisted mode. Tests ran on the laser driver of a radio-frequency photoinjector at the Joint Institute for Nuclear Research. The elements produced deep ultraviolet vortices, at wavelengths near two hundred sixty nanometers, with a topological charge of one. Twisted ultraviolet light could help steer and diagnose relativistic electron beams. The work shows structured light techniques can be pushed into a spectral range where tools are scarce.

Catalog record

CREATORA.S. Dyatlov, M.A. Nozdrin, A.N. Sergeev, N.E. Sheremet, S.S. Stafeev, D.V. Karlovets
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-16950

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Generation of Deep Ultraviolet Optical Vortices via Amplitude and Phase Spiral Zone Plates Preprint: APS/123-QED A.S. Dyatlov, M.A. Nozdrin, A.N. Sergeev, N.E. Sheremet, S.S. Stafeev, D.V. Karlovets Abstract We present the development and experimental implementation of diffractive optical elements designed to generate optical vortices in the deep ultraviolet range (260–266 nm). These elements, fabricated using advanced lithographic and etching techniques, facilitate the efficient transformation of Gaussian beams into twisted modes carrying orbital angular momentum. Experimental tests conducted using the laser driver of an RF photoinjector at JINR successfully demonstrate the generation of deep-ultraviolet optical vortices with a topological charge of l = 1 l=1 . These findings underscore the potential of structured light in the deep ultraviolet range for applications in relativistic electron beam studies and beam manipulation technologies. I Introduction Vortex beams, characterized by their helical phase front rotating around the propagation axis and carrying orbital angular momentum (OAM) Allen et al. 1992 , constitute a distinct class of light and charged particle beams. These unique properties set them apart from Gaussian beams and have positioned the use of vortex beams as an innovative approach for exploring the quantum states of charged particles. Their applications have been extended to diverse fields, including telecommunications Mirhosseini et al. 2015 and optical tweezer systems, which facilitate the precise manipulation of nanoscale objects Muñoz-Pérez et al. 2023 and many others Rubinsztein-Dunlop et al. 2016 . In the case of charged particle beams, early studies primarily focused on systems limited to low energies, such as transmission or scanning electron microscopes (up to 300 keV) Uchida and Tonomura 2010 ; Verbeeck et al. 2010 ; Blackburn and Loudon 2014 . These facilities are also effectively self-contained and do not permit the particle beam for subsequent acceleration to relativistic and ultra-relativistic energies, despite the absence of any theoretical limitations for this Karlovets 2021 . To address this limitation, a project aimed at developing a source of relativistic electrons with a nonzero OAM was proposed. This initiative is a collaborative effort between the ITMO University and the Dzhelepov Laboratory of Nuclear Problems (DNLP) at the Joint Institute for Nuclear Research (JINR) RSF . The fundamental concept of this project involves the transfer of OAM from photons to electrons via photoemission. Theoretical studies have indicated that the OAM of a photon is almost nearly transferred to electrons during this process Pavlov et al. 2024 . Consequently, the test facility for the RF photoinjector at Dzhelepov Laboratory has been modified. This test bench represents a classical RF photoinjector that incorporates a laser driver system, RF system, and accelerating structure represented by an RF gun developed by the Budker Institute of Nuclear Physics Nikiforov et al. 2018 . The primary system requiring modification in this context is the laser driver of the JINR photoinjector. The laser driver was originally designed to work with photocathodes, which provide the highest quantum efficiency in the deep ultraviolet range, because the work function for an electron from the surface of such cathodes is in the region of 4-5 eV. Xiang and Teichert 2015 . However, this design imposes specific constraints on available methods for generating twisted photon beams. For example, spatial light modulators and digital micromirror devices cannot be employed, because their matrix structures cannot withstand high-power laser radiation, rendering them inoperable in this wavelength range. Studies on generating vortex beams at higher harmonics and transferring their states to the fourth harmonic have demonstrated a reduction in harmonic conversion efficiency Sasaki et al. 2014 , primarily because of the loss of linear polarization, which is a key requirement for maintaining phase-matching conditions. This reduction subsequently led to a significant decrease in photoelectron current. An alternative concept for generating electron vortex beams involves magnetizing the cathode using a strong magnetic field Floettmann and Karlovets 2020 . This methodology also does not have the limitations associated with directing the beam to a target or high-frequency structures of the accelerator for further energy gain. However, this approach requires the creation of powerful fields near the cathode, and necessitates additional bunching and collimation of the electron beams after they are extracted from the source. In this regard, we primarily focused on the photoemission experiments. Traditional methods have been employed to generate vortex beams to address this challenge. Among the existing techniques, spiral phase plates are notable because of their high conversion efficiency for light into vortex beams. However, the fabrication of spiral phase plates is challenging because of the intricate topology required on substrates, such as fused quartz or calcium fluoride ( \mathrm{CaF_{2}} ), which remains underdeveloped. Another common method, fork diffraction grating, is simpler to fabricate but exhibits suboptimal conversion efficiency and significant light intensity losses. Typically, the intensity of the incident beam is divided into three beams (two beams with and without the OAM), resulting in unavoidable losses. To address these limitations, the development of spiral zone plates has been proposed. These plates offer the potential for high light conversion efficiency and are less complex to manufacture than spiral phase plates. The purpose of this study is to demonstrate the performance of the designed diffractive optical elements, evaluate their conversion efficiency into twisted optical modes, and validate the feasibility of generating such beams directly in the deep-ultraviolet range. II Design and manufacturing There are two primary types of spiral zone plate: amplitude and phase one Sharma et al. 2013 ; Kozlova and Kotlyar 2019 . Amplitude zone plates modulate the light amplitude by utilizing alternating transparent and nontransparent spiral-shaped zones. The pattern of this configuration resulted in light diffraction and formation of a spiral wavefront. Their fabrication involves high-resolution patterning techniques, such as electron beam lithography, to ensure a precise zone structure and amplitude modulation. In contrast, phase zone plates are designed to induce spatial variations in the light-beam phase while maintaining a relatively uniform amplitude. This is achieved through the incorporation of phase-shifting elements, such as grooves or microstructures, which modify the optical path length across the plate. The production of these devices requires precise control over the height and geometry of the structures, which can be accomplished using methods such as focused ion beam milling or nanoimprinting. These techniques ensure that the phase variations are smoothly distributed across the light wavefront, enabling manipulation of the phase profile of the beam. In general, these plates are characterized by their ability to produce a phase shift that depends on both the angle and radius, effectively converting the incident light into vortex radiation. The functional form of the spiral zone plate can be expressed SZP(r,\phi)=\exp\left(il\phi-\frac{i\pi r^{2}}{\lambda f}\right) (1) where (r,\phi) denotes the polar coordinate system; l is the topological charge which equal to the OAM; \lambda is the operating wavelength of the light; f is the focal length for generating vortex beams. Upon binarization, Eq. 1 can be represented as a transfer function T(r,\phi)=\begin{cases}1,&\sin\left(l\phi-\frac{\pi r^{2}}{\lambda f}\right)\geq 0\\ 0,&\sin\left(l\phi-\frac{\pi r^{2}}{\lambda f}\right)<0\end{cases} (2) where T(r,\phi) represents the transfer function of the amplitude spiral zone plate mask. For the phase zone plate, the value of 0 on the right-hand side of the equation is replaced by {-1} . Figures 1 and 2 show the diffractive optical elements manufactured. For the amplitude zone plate, the mask was transferred onto a fused

Read the complete text