Convolutions with Radio-Frequency Spin-Diodes
E. Plouet, H. Singh, P. Sethi, F.A. Mizrahi, D. Sanz-Hernández, J. Grollier · 2025
Read Convolutions with Radio-Frequency Spin-Diodes by E. Plouet, H. Singh, P. Sethi, F.A. Mizrahi, D. Sanz-Hernández, J. Grollier (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-16204.txt.
Introduction
Erwann Plouet and co-authors show that simple magnetic diodes can sort radio signals in hardware, in work from twenty twenty-five. Sorting radio waves matters for robots, traffic control, and medical gear. Past work used tiny magnetic tunnel parts in a neural net to sort waves with no digital step. Those parts are hard to scale up fast, so a simpler part is welcome.
The new parts are thin two-layer spin-diodes made of nickel-iron and platinum. Each one can add up weighted radio inputs on its own. Chains of four diodes run small image filters that blur or sharpen as set. Tests use the Fashion-MNIST image set to check the filters. A mixed hardware and software net scores close to a pure software net. The gap to a noise-free net is also small.
Catalog record
| CREATOR | E. Plouet, H. Singh, P. Sethi, F.A. Mizrahi, D. Sanz-Hernández, J. Grollier |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 13 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-16204
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Convolutions with Radio-Frequency Spin-Diodes E. Plouet, H. Singh, P. Sethi, F.A. Mizrahi, D. Sanz-Hernández, J. Grollier Abstract Abstract —The classification of radio-frequency (RF) signals is crucial for applications in robotics, traffic control, and medical devices. Spintronic devices, which respond to RF signals via ferromagnetic resonance, offer a promising solution. Recent studies have shown that a neural network of nanoscale magnetic tunnel junctions can classify RF signals without digitization. However, the complexity of these junctions poses challenges for rapid scaling. In this work, we demonstrate that simple spintronic devices, known as metallic spin-diodes, can effectively perform RF classification. These devices consist of NiFe/Pt bilayers and can implement weighted sums of RF inputs. We experimentally show that chains of four spin-diodes can execute 2x2 pixel filters, achieving high-quality convolutions on the Fashion-MNIST dataset. Integrating the hardware spin-diodes in a software network, we achieve a top-1 accuracy of 88 % on the first 100 images, compared to 88.4 % for full software with noise, and 90 % without noise. I Introduction Fully spintronic neuronal networks using nanoscale magnetic tunnel junctions (MTJs) can classify non-linearly separable radio-frequency (RF) inputs without pre-processing or digitization [ 1 ] . Such a system is predicted to significantly improve energy efficiency, consuming about 10 fJ per synapse and 100 fJ per neuron with MTJs miniaturized to 20 nm—over 100 times more efficient than GPUs. The frequency multiplexing strategy used for neuron-to-synapse communication supports high connectivity, up to 500 synapses per neuron, and is free of sneak paths. However, current hardware implementations are limited to two synapses per neuron due to the complexity of MTJ stacks. To address these challenges, simpler materials can be used, maintaining the principles of RF interconnects and frequency multiplexing. In this work, we demonstrate that two-layer metallic spin-diodes [ 2 ] can perform high-quality weighted sums, enabling convolutional filters on the Fashion-MNIST dataset [ 3 ] . II Metallic spin-diode synapses The samples studied, shown in Fig. 1(a), consist of a 5nm nickel iron bilayer capped with 5nm platinum on a high-resistance silicon wafer. Fig. 1(b) and (c) display a typical device contacted with gold electrodes, measuring 5 by 10 micrometers. When an RF current is injected into these stripes, they generate a rectified DC voltage V_{DC} due to the mixing of the input with the anisotropic magneto-resistance (AMR) response, which can be calculated analytically [ 4 ] . Fig. 2(a) shows the analytically calculated variations of V_{DC} as a function of the applied magnetic field amplitude H along the z-axis for a fixed frequency RF current. The applied magnetic field monotonically varies the device’s resonant frequency, f_{res}=f_{res}(H) , from \approx 1 to 4 GHz here. The voltage is positive when f_{res}(H)<f_{RF} and negative when f_{res}(H)>f_{RF} . For small differences between f_{res}(H) and f_{RF} , the voltage simplifies to: V_{DC}\propto(f_{res}(H)-f_{RF})sin(2\Phi_{0})P_{RF}\propto WP_{RF} , with P_{RF} the power of the injected current. In our design (Fig. 1(c)), we set the angle \Phi_{0} between the stripe and the applied magnetic field to 45° to maximize V_{DC} . Fig. 2(b) shows the calculated V_{DC} as a function of P_{RF} for different magnetic field values. The RF power of the injected current ( P_{RF} ) is the synapse input, and V_{DC} is the output. The weight W , corresponding to the slope in Fig. 2(b), is tuned by the applied magnetic field. To perform the weighted sum, we use three methods illustrated in Fig. 3. First, we electrically connect several devices to sum their DC voltages. Second, we send RF inputs ( P_{RFi} ) at different frequencies: I_{RF}(tot)=\sum_{i}I_{RFi} . Third, we apply different magnetic fields to each device, giving each a unique resonant frequency f_{res}(Hi) close to f_{RFi} . This frequency multiplexing technique implements a weighted sum, with, in the linear regime, V_{DC}\propto\sum_{i}(f_{res}(Hi)-f_{RFi})sin(2\Phi_{0})P_{RFi}\propto\sum W_{i}P_{RFi} . Fig. 4(a) shows the experimental implementation of a spatial field gradient along the z direction with four permanent magnets. This gradient links the synaptic weight of each device to its position along the z-axis. Fig. 5 shows the field components H_{x} , H_{y} , and H_{z} obtained by spatially scanning a 3D Hall probe in the field gradient with a motorized stage, achieving large variations in H_{z} over +/- 10 mT along the z-axis while keeping small variations in other directions. Fig. 6(a) displays the experimentally measured V_{DC} response of a single device as a function of the z position in the field gradient. Fig. 6(b) shows the V_{DC} vs. P_{RF} curves for different z positions, qualitatively aligned with the analytical calculations in Fig. 2. The large background signal outside the linear operation region (highlighted in yellow) is problematic for devices in a chain due to overlaps. We design differential RF synapses to cancel these backgrounds, leaving a strong response in the desired region only. As shown in Fig. 7, such synapse comprises two NiFe/Pt stripes connected in parallel at +45° and –45° to the magnetic field. This angle difference produces opposite V_{DC} signals. Fig. 8(b) shows that when fabricated at the same z position, the overall V_{DC} cancels out over a wide range of RF inputs. When slightly displaced by \delta_{z} (40 micrometers in Fig. 8(a) and (c)), the signal response is strong within a narrow region, demonstrating frequency selectivity. The peak amplitude is proportional to \delta_{z} and P_{RF} , making the synaptic weight controllable by the shift between devices (Fig. 8(d)). To predict weight values before lithography, we perform a calibration step. We record and average the response of three identical 45° stripes for various f_{RF} and z positions, obtaining a reference V_{ref}(f,z) (Fig. 9a). The differential pair’s synaptic response is predicted by V_{synapse}(f,z)=0.5\times(V_{ref}(f,z–\delta_{z}/2)+V_{ref}(f,z+\delta_{z}/2)) . This response is shown in Fig. 9b for fixed P_{RF} and \delta_{z} , with peak values decreasing with input frequency. This effect is accounted for by rescaling the injected power: P_{RF}(cal)=P_{RF}\times(-40\times 3.1(GHz)+150)/(-40\times f_{RF}(GHz)+150) . For weighted sum operations, the device chains must have an impedance matched to 50 \Omega RF sources for effective signal propagation. Various architectures are possible: series (Fig. 10(a)), parallel (Fig. 10(b)), or hybrid (Fig. 10(c)). We choose the hybrid configuration because the total chain resistance does not depend on the number of devices it contains, which will enable the implementation of larger kernels (of size ¿ 9x9) in the future. Examples of fabricated devices with a target resistance of 50 \Omega are shown in Fig. 11(a) and (b). III Spin-diode convolutions We use three chains of four differential synapses to implement three 2x2 convolutional filters on the Fashion MNIST dataset, as illustrated in Fig. 12.The twelve weights are pre-calculated by training a software neural network, as shown in Fig. 13. The network consists of a convolutional layer with three 2x2 filters (stride and padding of 1), followed by max pooling (kernel size and stride of 2), ReLU neurons, a fully connected layer, and a softmax function for classification. During training, Gaussian noise is added to the outputs of the convolutional layer to ensure noise-resistant weights. The test accuracy reaches 87.63% without noise and 86.34% with 50% noise, indicating a small accuracy loss of 1.3%. After training, we implement the learned weights of the first convolutional layer in hardware through lithography. The input frequencies are set to 1.75, 2.25, 2.75, and 3.25 GHz. Based