Dynamical systems for remote validation of very high-resolution ocean models

Guillermo García-Sánchez, Ana M. Mancho ∗, Antonio G. Ramos, Josep Coca, Jose Antonio Jimenez Madrid · 2025

Read Dynamical systems for remote validation of very high-resolution ocean models by Guillermo García-Sánchez, Ana M. Mancho ∗, Antonio G. Ramos, Josep Coca, Jose Antonio Jimenez Madrid (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-16026.txt.

Introduction

Guillermo García-Sánchez and co-authors check fine ocean models against satellite photos in a paper from two thousand twenty-five. Coastal models give detail that coarse data products miss. But shore zones lack the ship and buoy readings usually used to tune them.

Their method runs a standard ocean model under varied settings, then links each run's output to satellite images through markers from dynamical systems theory. A score rates which run best matches the seen ocean state. The approach needs no in-place sensors. The authors pitch remote validation as a way to trust high-resolution coastal forecasts.

Catalog record

CREATORGuillermo García-Sánchez, Ana M. Mancho ∗, Antonio G. Ramos, Josep Coca, Jose Antonio Jimenez Madrid
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-16026

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Dynamical systems for remote validation of very high-resolution ocean models Guillermo García-Sánchez, Ana M. Mancho ∗, Antonio G. Ramos, Josep Coca, Jose Antonio Jimenez Madrid Abstract Abstract This paper presents and investigates a novel methodology for validating high-resolution ocean models using satellite imagery. \textcolor blackHigh-resolution ocean models provide detailed information in coastal areas where other available data products are too coarse. Models are usually fitted by comparing them with observations; However, accessing in situ data in all small coastal areas is not feasible, as in situ observations are scarce and obtained through dedicated ships or instruments in limited and selected regions. Our work aims to use alternative remote sensing information to overcome this challenge. The approach involves establishing connections between the satellite observations and the outcomes of various \textcolor black computational experiments carried out using the Regional Ocean Modeling System (ROMS), which allows the selection of different parameters to run the ocean model. These choices are not fully determined a priori and \textcolor black each one produces distinct outputs, which are then linked to the images through dynamical systems objects. By defining a performance index, we are able to quantify which experiment provides a better representation of the local ocean state. I Introduction Ocean numerical models help to understand and predict ocean variables that have an impact on the environment, climate, and human activities. Oceanic data produced by models are increasingly becoming available, with various services providing valuable information on the ocean’s physical state and dynamics. For instance, the Copernicus Marine Environment Monitoring Service (CMEMS) offers regular and systematic data on current and future variables, as well as retrospective data records (re-analysis) of the global and European regional seas. Alternatively, the HYbrid Coordinate Ocean Model (HYCOM) –a multi-institutional effort sponsored by the National Ocean Partnership Program (NOPP) as part of the U.S. Global Ocean Data Assimilation Experiment (GODAE)– is dedicated to developing and evaluating data-assimilative hybrid coordinate ocean models. The products offered by these services typically have resolutions of the order of 2.5-8 km and have been successful in describing events above those scales [ 30 , 31 , 16 ] . More recently it has been pointed out [ 15 ] the necessity of using products with much higher resolution to address management needs at the coastal level. These needs may include navigation, harmful algae blooms, effluent dispersion, search and rescue operations, oil spill response, etc. In these cases, models are particularly valuable for understanding and predicting ocean currents for the management of aspects that affect life in these areas, including beach conditions and near-shore environments. In situ measurements are incorporated into ocean models through different methodologies to achieve outputs that are accurate and consistent with the real ocean state. Among the instruments employed for in situ measurements are moored current meters, drifters, shipboard current profilers that measure sea surface velocity, etc. The deployment and maintenance of this equipment is expensive and, in general, its spatial coverage is limited to hotspot areas where the investment in these measurements is worth it. There exist however wide coastal and marine protected areas, where high-resolution models can be very valuable for management purposes, but for which in situ measurements are not available and therefore their validation is challenging. However, observations in these areas are possible through satellites that today are equipped with multiple remote sensing systems capable of providing valuable information on the dynamic properties of extensive oceanic coastal areas. In this work, we will explore the use of methodologies based on dynamical systems and satellite imagery for feedback and adjustment of ocean model outputs and as a validation method. More specifically, this study starts with the creation of a very high-resolution hydrodynamic model in an area for which no in situ measurements were available. This is the area of the Rafina port in Greece, which was taken as a study case in the framework of the IMPRESSIVE project in which authors participated. Sentinel 2 and Sentinel 3 images near the coast provide images in the optical band that after being processed are able to identify turbidity caused by suspended particles, including particulate and dissolved organic and inorganic matter. These materials may derive from sources such as primary production blooms and wastewater. The spread of these compounds makes visible convoluted shapes, which are linked to invariant dynamical objects, called Lagrangian Coherent Structures, obtained from the currents. Thus, patterns visible in remote sensing images can be correlated to patterns obtained from the hydrodynamic model. We will utilize this idea to explore an effective methodology for validating the transport capacity of the model outputs. This approach differs from classical validations that compare in situ measurements of currents, sea level, etc. with those obtained from the models. Our comparison is systematically implemented by adjusting the parameters and parameterizations required by the model, which include closure relationships for unresolved turbulent scales, lateral boundary conditions for the nested model, and the coupling of surface ocean motion with atmospheric winds, among others. In addition, an index is defined to quantify the degree of fitting of each parameter set to the satellite observations. The manuscript is structured as follows. Section II provides a description of the equations and software utilized to set up the hydrodynamical model for the Rafina Port. It also discusses the boundary conditions and settings specific to the temporal window of October-December 2019. In Section III , the available remote sensing products for that temporal window are described. Section IV delves into the dynamical systems concepts used to establish the connection between the hydrodynamical model outputs and the satellite imagery. Section V outlines the various settings for the experiments conducted and details the procedure used to quantify their performance. The results are explained in Section VI , and finally, \textcolor black a discussion and the conclusions are presented in Section VII . II The hydrodynamic model II.1 The oceanic regional model To set up the hydrodynamic model we have used the Regional Oceanic Modeling System (ROMS) \textcolor black(see details on [ 17 ] ). \textcolor blackROMS numerically solves the Navier–Stokes equations while considering the hydrostatic and Boussinesq assumptions [ 3 , 11 ] . However, ROMS does not solve these 3D equations exactly in a turbulent regime; instead, it utilizes the unsteady Reynolds-Averaged Navier–Stokes (RANS) equations. These are derived from the Navier-Stokes equations by applying Reynolds decomposition, which decomposes the instantaneous velocity field ( \textbf{v}_{T} ) into a time-averaged ( \overline{\textbf{v}}_{T} ) and a fluctuating component ( \textbf{v}^{\prime}_{T} ). In this work, the mean velocity is the velocity field solved in equations ( 1 )-( 3 ), which is referred to as \textbf{v}=(u,v,w) there. The fluctuating component \textbf{v}^{\prime}_{T}=(u^{\prime},v^{\prime},w^{\prime}) is solved using turbulent closure \textcolor blackrelations, which are detailed later in this section. ROMS has been employed in numerous operational oceanography systems on regional scales. Examples include the NOAA operational forecast systems for locations such as Tampa Bay, Chesapeake Bay, and the Gulf of Maine, and the SAMOA system, which the Spanish Public State Port Agency developed to offer tailored operational meteorological and oceanographic data [ 42 ] . ROMS has also been utilized in diverse applications like estuarine modeling [ 34 ] , sediment transport [ 37 ] , oceanic basin modeling [ 41 ] ,

Read the complete text