On-demand storage and retrieval of single photons from a semiconductor quantum dot in a room-temperature atomic vapor memory

Benjamin Maaß, Avijit Barua, Norman Vincenz Ewald, Elizabeth Robertson, Kartik Gaur, Suk In Park, Sven Rodt, Jin-Dong Song, Stephan Reitzenstein, Janik Wolters · 2025

Read On-demand storage and retrieval of single photons from a semiconductor quantum dot in a room-temperature atomic vapor memory by Benjamin Maaß, Avijit Barua, Norman Vincenz Ewald, Elizabeth Robertson, Kartik Gaur, Suk In Park, Sven Rodt, Jin-Dong Song, Stephan Reitzenstein, Janik Wolters (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-15663.txt.

Introduction

Benjamin Maaß and co-authors report a 2025 step toward quantum networks: storing single light particles on demand. Future quantum links need sources of single photons that can pause in a memory. Solid chip sources and gas memories run on mismatched scales, which has made joining them hard.

The team used a chip-made quantum dot that emits single photons at a wavelength matched to cesium gas. The photons then entered a warm cesium vapor memory built for low noise. The group held and released photons on demand, with hold times up to about twenty nanoseconds. The yield was low, under one percent, but the demo widens what both tools can do in future networks.

Catalog record

CREATORBenjamin Maaß, Avijit Barua, Norman Vincenz Ewald, Elizabeth Robertson, Kartik Gaur, Suk In Park, Sven Rodt, Jin-Dong Song, Stephan Reitzenstein, Janik Wolters
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-15663

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On-demand storage and retrieval of single photons from a semiconductor quantum dot in a room-temperature atomic vapor memory Benjamin Maaß, Avijit Barua, Norman Vincenz Ewald, Elizabeth Robertson, Kartik Gaur, Suk In Park, Sven Rodt, Jin-Dong Song, Stephan Reitzenstein, Janik Wolters Abstract Interfacing light from solid-state single-photon sources with scalable and robust room-temperature quantum memories has been a long-standing challenge in photonic quantum information technologies due to inherent noise processes and time-scale mismatches between the operating conditions of solid-state and atomic systems. Here, we demonstrate on-demand storage and retrieval of single photons from a semiconductor quantum dot device in a room-temperature atomic vapor memory. A deterministically fabricated InGaAs quantum dot light source emits single photons at the wavelength of the cesium D1 line at 895 nm which exhibit an inhomogeneously broadened linewidth of 5.1(7) GHz and are subsequently stored in a low-noise ladder-type cesium vapor memory. We show control over the interaction between the single photons and the atomic vapor, allowing for variable retrieval times of up to 19.8(3) ns at an internal efficiency of η int = 0.6 ​ ( 1 ) % \eta_{\mathrm{int}}=0.6(1)\% . Our results significantly expand the application space of both room-temperature vapor memories and semiconductor quantum dots in future quantum network architectures. Preprint: APS/123-QED I Introduction High-fidelity quantum networks require an architecture that connects individual quantum nodes via photonic quantum channels [ 1 ] . In this context, quantum memories play a pivotal role in distributing entanglement over large distances [ 2 ] , buffering local network nodes and increasing the networks’s throughput. Due to their scalability and robustness, room-temperature atomic vapor memories are a particularly well-suited memory platform [ 3 , 4 ] . Semiconductor quantum dots (QD), on the other hand, have emerged as a highly promising platform for the deterministic generation of single photons and entangled photon states of light in the field of photonic quantum information processing [ 5 ] . In particular, InGaAs QDs operating in the near-infrared (NIR) spectral range are highly suitable for integration into quantum networks due to their ability to emit single photons with high purity and indistinguishability [ 6 , 7 ] . Controlled interactions between such heterogeneous systems can be the backbone of future quantum network applications such as quantum-secure communication [ 8 , 9 , 10 ] , remote sensing [ 11 , 12 , 13 ] or distributed quantum computing [ 14 ] . Interfacing QD-based single-photon sources (SPS) with atomic vapor-based quantum memories presents substantial challenges due to bandwidth mismatches between solid-state and atomic systems, intrinsic noise processes and the need for matching of operational wavelengths with sub-GHz accuracy [ 15 ] . Nevertheless, significant progress has been achieved in this field. This includes the wavelength-matched interaction and delay of QD single photons in alkali vapor [ 16 , 17 , 18 , 19 ] , delay of two-photon Fock states [ 20 ] and delay of entangled photons [ 21 ] . However, these demonstrations only delayed the single photons but did not allow for on-demand control of the interaction with the alkali vapor. The latter requires a suitable low-noise and bandwidth-matched optical memory. Figure 1: Interconnection of QD SPS with atomic quantum memory. (a) Electronic band structure of the InGaAs QD; (b) Atomic level scheme of cesium including the D1 signal and control transitions; Artistic impression of (c) the quantum memory and (d) the QD-hCBG SPS. Previous works on ladder-type memories in room-temperature vapors [ 22 , 23 ] have shown simultaneous ultra-low noise and high-bandwidth operation which is a key requirement for storing QD photons with large linewidth in optical memories. Indeed, several alkali vapor memories have been experimentally identified to be readily compatible with single photons emitted from QD devices [ 24 , 25 , 26 ] . Most recently, telecom single photons from an InAs QD have been stored in a hot atomic vapor memory in a proof-of-concept experiment [ 27 ] . However, the level configuration of the used memory limited the effectively non-variable storage time to 800 ps, i.e. on the timescale of the exciton lifetime. For synchronization and buffering a time-bandwidth product B\gg 1 and real time controllability of the on-demand memory read-out are required. A QD-memory interface that provides such utility remains a milestone yet to be achieved. In this work, we present such an interface between an InGaAs QD device and a room-temperature Cs vapor memory, showing on-demand storage and retrieval. The QD is deterministically integrated [ 28 , 29 ] into a hybrid circular Bragg grating (hCBG) cavity [ 30 , 31 ] and wavelength-aligned with the Cs D1 line at 895 nm. The ladder-type memory allows for programmable storage times of up to \tau_{\mathrm{s}}=19.8(3) ns, exceeding the spontaneous emission lifetime of the QD \tau_{\mathrm{QD}}=1.4(1) ns by more than one order of magnitude, resulting in a time-bandwidth product of B=\tau_{\mathrm{s}}/\tau_{\mathrm{QD}}=14(1) . The QD photons are stored and retrieved with an internal efficiency of \eta_{\mathrm{int}}=0.6(1)\% . II Experimental setup This experiment consists of two heterogeneous parts: the cryogenically cooled QD-hCBG SPS and the room-temperature atomic vapor memory, as depicted in Fig. 1 . Initially, an optical setup collects the single photons emitted by the QD device and couples them into a single-mode fiber to be connected to the quantum memory setup. In the following section, we first describe the fabrication of the QD device and its optical properties before presenting the QD-memory interface. II.1 QD single-photon source The QD-hCBG SPS employed in this study is based on a sample containing InGaAs QDs, grown by molecular beam epitaxy (MBE) [ 32 ] . By employing a flip-chip wafer bonding process, a thin membrane of GaAs with the embedded QD-layer is hybridly integrated with silicon dioxide ( \text{SiO}_{2} ) as a dielectric layer and a backside gold mirror as a reflector to redirect the downward propagating light towards the top [ 33 , 34 ] . To further improve the collection efficiency and to generate a near-Gaussian far-field emission profile of the source, the QD sample is integrated with a CBG cavity which comprises a central mesa surrounded by three periodic concentric rings [ 34 , 31 , 35 , 36 ] . The fabrication of the device is based on the in-situ electron beam lithography (iEBL) technique which allows for straightforward deterministic integration of QDs into the resonator structure [ 28 , 37 ] . The design parameters for the hCBG cavity were numerically optimized using a finite element method (FEM) [ 38 , 39 ] . (a) (b) (c) (d) Figure 2: The QD-hCBG device and its single-photon properties. (a) SEM image (45°-tilted view) of a fabricated QD-hCBG device composed of GaAs membrane after in-situ fabrication. (b) Polarization-resolved H-V spectra of the QD integrated into a hCBG device emitting at 17 K. The inset displays a magnified view of the exciton emission spectra centered around 894.57 nm aligned with the memory frequency. The gray area represents the spectrometer FWHM resolution, which is about 7.5 GHz (31 µeV). (c) Measured and fitted photon autocorrelation function g^{(2)}(t) of the QD at 17 K. The area-integrated value is 15(2)\% . The inset shows a magnified view at zero delay. (d) Measured and fitted spectrally filtered

Read the complete text