Prediction of Received Power in Low-Power and Lossy Networks Deployed in Rough Environments

Waltenegus Dargie · 2025

Read Prediction of Received Power in Low-Power and Lossy Networks Deployed in Rough Environments by Waltenegus Dargie (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-15182.txt.

Introduction

Waltenegus Dargie studies wireless sensor networks placed in harsh settings, where heat, rain, or motion can break links and lose data packets. The low-cost sensing nodes in such networks need to adjust their sending power to keep links stable. They usually do this by checking the power of signals they receive, but when many packets are lost, that check no longer reflects the true state of the link.

Dargie proposes a light method that forecasts received power several steps ahead, so a sender can set its power even when packets go missing. The method needs little computing power, which suits small battery-run nodes. In field tests with two common low-power radios, the forecasts were right more than ninety percent of the time on the faster radio and about eighty-five percent on the slower one. The work helps outdoor sensing systems stay linked in rough conditions.

Catalog record

CREATORWaltenegus Dargie
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-15182

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Prediction of Received Power in Low-Power and Lossy Networks Deployed in Rough Environments Waltenegus Dargie Abstract Cost-efficient and low-power sensing nodes enable to monitor various physical environments. Some of these impose extreme operating conditions, subjecting the nodes to excessive heat or rainfall or motion. Rough operating conditions affect the stability of the wireless links the nodes establish and cause a significant amount of packet loss. Adaptive transmission power control (ATPC) enables nodes to adapt to extreme conditions and maintain stable wireless links and often rely on knowledge of the received power as a closed-feedback system to adjust the power of outgoing packets. However, in the presence of a significant packet loss, this knowledge may not reflect the current state of the receiver. In this paper we propose a lightweight n-step predictor which enables transmitters to adapt transmission power in the presence of lost packets. Through extensive practical deployments and testing we demonstrate that the predictor avoids expensive computation and still achieves an average prediction accuracy exceeding 90% with a low-power radio that supports a transmission rate of 250 kbps (CC2538) and 85% with a low-power radio that supports 50 kbps (CC1200). I Introduction Deploying low-power IoT sensing nodes in different physical environments enables to monitor vital parameters without the need for human presence or interference [ 1 , 2 ] . Some of these environments impose extreme operating conditions, affecting the performance and the lifetime of the nodes [ 3 ] . For example, during water quality monitoring, some nodes have to be deployed on the surfaces of restless waters, which constantly move and displace the nodes. Besides affecting the quality of the wireless links the nodes establish, the constant movement of the nodes also steadily modifies the topology of the network, making the discovery of new routes and the maintenance of existing routes a challenging assignment. One of the most important requirements for low-power sensing nodes to operate in these types of environments is dynamic adaptation of transmission power. A transmitter should have some knowledge of the relative distance of the receiver and the transmission path to estimate the power with which outgoing packets should be transmitted. Assuming the existence of a symmetric, unicast channel between the transmitter and the receiver, the former can estimate the relative distance of the later from the received power of ACK packets. The only problem is that, since the wireless channel is lossy, some packets will inevitably be lost and the receiver may have changed its location since its last successful transmission of ACK packets. In general, statistical-based predictors can be used to estimate the received power in the presence of lost packets, but they are computationally expensive. For example, predictors based on Minimum Mean Square Estimation (MMSE) require matrix inversion to determine model parameters, but the computational resources (CPU, memory) this requires is something most existing resource-constrained sensing devices cannot meet. It is, therefore, important to use a predictor whose (1) computational cost is modest but (2) performance is high. The aim of this paper is to achieve these goals. • As the first contribution of this paper, our predictor avoids matrix inversion through (a) function approximation and (b) orthogonalization. • As the second contribution, the model tolerates multiple successively lost packets, achieving a prediction accuracy exceeding 90% even when the packet transmission rate is modest (10 packets per second). • As a third contribution, we demonstrate the usefulness of the predictor through extensive experiments involving actual deployments on four different water bodies. The remaining part of the paper is organized as follows. In Section II , we review related work. In Section III , we describe the deployment scenarios. In Section IV we briefly discuss the autocorrelation function, as our model relies on it. In Section V , we present our model, define the model parameters and discuss different approaches to minimise the computation cost of the model. In Section VI we evaluate the performance of our model and compare its performance with some competitive work. Finally in Section VII we provide concluding remarks and outline future work. II Related Work Managing the power consumption of low-power sensing devices is of paramount importance to achieve reliable communication and long operation life [ 4 , 5 ] . In most existing architectures, the radio subsystem of these devices is second only to the processing subsystem when it comes to power consumption [ 6 ] . In the literature, the problem of power consumption is addressed in different ways, including, micro energy harvesting [ 7 ] , energy prediction and task scheduling [ 8 , 9 ] , compressed sensing [ 10 ] , wireless power transfer [ 11 ] , topology control [ 12 ] , and adaptive duty cycles [ 13 ] . Deployment environments (such as human presence and activities) and weather conditions (excessive heat and rainfall) affect the performance of low-power sensing networks, causing serious link quality fluctuations, packet loss, and end-to-end packet transmission latency [ 14 , 15 , 16 ] . In [ 17 ] a dynamic rate and transmission power control algorithm for Bluetooth Low Energy (BLE) is proposed. Based on the latency and throughput requirements of a client device, the protocol aims to adjust the connection interval, data rate, and transmission power according to the link state. The protocol classifies a wireless link into good, fair, and bad. In the first, the requirements of the client can be fulfilled and there is room either to increase transmission rate or decrease transmission power. In the second, the link quality is just enough to fulfil the requirements and there is no need to make any adaptation. In the third, the perceived quality of the link is not sufficient to satisfy the latency requirement of the client application; this requires either a reduction of the transmission rate or an increase of the transmission power. In either case, rate and transmission power adaptation take place gradually, until the desired link state is achieved, thus eliminating the need to directly estimate/predict the received power. However, the gradual increase/decrease of the transmission power or the transmission rate takes time and may cause a considerable packet loss in case the wireless link experiences drastic changes. In [ 18 ] , a model based on MMSE is proposed to jointly optimize the transmit power of multiple low-power devices (the transmitters) and the signal scaling (denoising) factor of a fusion centre (FC), subject to individual average power constraints at the devices. The proposed model works for a single-hop, star-topology network wherein the FC plays the role of an aggregator whose purpose is to fuse the information from the low-power devices. The topology enables the devices to simultaneously transmit, however, instead of transmitting the original signal, the devices choose a function which normalises the original information, such that the aggregate information at the FC has a normally distributed random process having a zero mean and a variance of one. This configuration enables the devices to reduce the cost of transmission and, the FC, to reconstruct the original information in the presence of signal distortion. Multiple assumptions as regards the channel – time-variant vs. time-invariant; with or without the availability of channel state information (CSI) –

Read the complete text