An Efficient GPU Approach for Designing 3D Cultural Heritage Information Systems

Luis López, Juan Carlos Torres, Germán Arroyo, Pedro Cano, Domingo Martín · 2025

Read An Efficient GPU Approach for Designing 3D Cultural Heritage Information Systems by Luis López, Juan Carlos Torres, Germán Arroyo, Pedro Cano, Domingo Martín (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-14807.txt.

Introduction

Lopez and four colleagues design a faster way to build three dimensional museum data systems in twenty twenty-five. Such systems let users explore old objects and sites with notes tied to each part. Notes are stored in layers by theme, so detail does not depend on the mesh. Older layer systems were slow and used too much storage.

The new design stores layers as flat images that graphics cards handle with ease. The team gives the card based steps needed to edit those layers. In speed tests, the new design beat a system based on nested cubes. The work could help museums share rich three dimensional records at lower cost.

Catalog record

CREATORLuis López, Juan Carlos Torres, Germán Arroyo, Pedro Cano, Domingo Martín
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE38 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-14807

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

An Efficient GPU Approach for Designing 3D Cultural Heritage Information Systems Luis López, Juan Carlos Torres, Germán Arroyo, Pedro Cano, Domingo Martín Abstract We propose a new architecture for 3D information systems that takes advantage of the inherent parallelism of the GPUs. This new solution structures information as thematic layers, allowing a level of detail independent of the resolution of the meshes. Previous proposals of layer based systems present issues, both in terms of performance and storage, due to the use of octrees to index information. In contrast, our approach employs two-dimensional textures, highly efficient in GPU, to store and index information. In this article we describe this architecture and detail the GPU algorithms required to edit these layers. Finally, we present a performance comparison of our approach against an octree based system. Journal: Journal of Cultural Heritage 1 Introduction Documentation of cultural heritage artefacts is one of the most important tasks in terms of understanding and preserving tangible heritage. This process usually involves handling huge sets of heterogeneous data: photographs, illustrations, recordings, logbooks, plans, diaries, databases, digitized 3D models, etc. In traditional information systems, these data are usually stored in the absence of any kind of cross-referencing between the 3D model and the database. The development of 3D scanning technologies over the last decade has allowed us to capture highly accurate representations of cultural heritage artefacts. Following the application of the proper processing techniques, the resulting 3D models possess sufficient geometric detail for them to be useful in terms of taking measurements and performing geometric operations. The geometric information offered by these digitized 3D models is connected with every other type of meaningful data used to document artefacts. After all, pictures are taken to accurately document specific areas, illustrations are drawn to emphasize finer details, logbooks are used to register the work done in different sections at specific times, etc. It thus seems natural, therefore, to organize and store this information on the surface of the 3D models. 2 Research Aim This article presents a new architecture for cultural heritage information systems that borrows from the foundations and functionality of Geographic Information Systems (GISs) and applies them to 3D models. Our solution organizes the information in thematic layers that are mapped onto the surface of the 3D model (Figure 1 ). The data of these layers is stored on 2D textures and texture coordinates are used to properly index that information. This new approach takes advantage of the parallelism and efficiency of the Graphics Processing Units (GPUs) to handle and operate these structures. Our approach also allows to associate information independently of the geometry of the 3D model. Figure 1 : Prototype of the proposed architecture. The user has associated two information layers to the 3D model of a vessel. The first layer cracks identifies the area of the cracks using a green color. The second layer pieces identifies the different pieces of the shattered vessel using the selected palette. 3 Previous works In this section, we classify previous works related to information systems into four categories according to the dimension of the space employed in the analysis and visualization of data. 3.1 2D space These methods represent the information by means of 2D structures and employ existing GISs with minor modifications to document tangible heritage. This choice provides a vast range of solid tools with powerful analytic and information retrieval capabilities. However, these methods lack a bidirectional connection between the stored information in a 2D plane and the digitized 3D source model. It is, therefore, necessary to process this 3D model before using it as a valid input in these systems. Naglič [ 1 ] and Ioannidis et al. [ 2 ] are good examples of this approach. They both use GISs for their work on large-scale archaeological sites, as these systems allow them to index large areas by geographical coordinates. Likewise, Parkinson et al. [ 3 ] employ GISs to study tooth marking patterns created by large contemporary canids on the bones of their preys and compare them with earlier fossils. They photograph the bones and manually create vector layers of the markings. In each of these cases they have to compromise the 3D nature of the source material in order to use GISs to analyse the data, limiting their entire work-flow to just one point-of-view at a time. 3.2 2.5D space These methods work with images and GISs to analyse and process the data. In contrast to the 2D approaches, the images are rasterized elevation models that contain height information. Therefore, they work in the restricted 3D space that this type of images provide. It is a more flexible and powerful method but, at the same time, it shares the issues of the 2D approaches. They need to convert the digitized 3D models into the appropriate image format and they are restricted to only one point of view. Benito et al. [ 4 ] use this approach to classify stone tools employed by wild chimpanzees. They divide this classification in several stages: first they scan the tools, then they transform the resulting 3d models into digital elevation models and finally, they use morphometric GIS classification functions to discriminate between active and passive pounders in lithic assemblages. 3.3 Hybrid space The methods under this category work in a 2D space during the stages of analysis and data processing and then visualize the resulting information in a 3D space. Two different transformation steps are required for this process. First, they need to project the initial 3D model, used as geometric reference, onto different 2D planes. The resulting images or digital elevation models are later processed in a GIS. Once this process has finished, the output needs to be projected onto the 3D model again as a texture. Although these methods lack the point-of-view restrictions of those described above, their work-flow is more complex and it suited only to tangible heritage easily divisible in 2D planes. Campanaro et al. [ 5 ] used this approach to tackle the preservation of architectonic structures. They project the façade of buildings into multiple images, process them in different GISs and finally, they project the results onto a simplified version of the original 3D models of the buildings for their visualization. 3.4 3D space Unlike the previous approaches, these methods work directly with the digitized 3D models. There are no point-of-view restrictions and no transformations between different work spaces. 3.4.1 Annotation systems The main goal of these systems is to associate information on specific sections of 3D model surface and offer robust information retrieval tools. There is a wide spectrum of indexation mechanisms under this paradigm, ranging from submeshes of the original 3D model to lines or points in 3D space. Durand et al. [ 6 ] , Meyer et al. [ 7 ] and Mateos et al. [ 8 ] propose several online information systems to document archaeological sites. These systems require that the original 3D model is segmented into smaller and distinct entities. The analysis, processing and dissemination of information are done for each entity instead of the complete model. Giunta et al. [ 9 ] use AutoCAD models to structure the architectural information and diagnostic investigation results of Milan’s Cathedral

Read the complete text