Joint Precoder and Reflector Design for RIS-assisted Multi-user OAM Communication Systems

Xiaoyan Ma, Yufei Zhao, Haixia Zhang · 2025

Read Joint Precoder and Reflector Design for RIS-assisted Multi-user OAM Communication Systems by Xiaoyan Ma, Yufei Zhao, Haixia Zhang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-14626.txt.

Introduction

Orbital angular momentum lets one radio channel carry several twisted beams at once. The trick fails when transmitters and receivers drift out of alignment, because the beams blur into each other. The authors of a 2025 study add a reconfigurable intelligent surface to a multi-user system. They design the transmitter in three layers: cancel interference between users, remove self-interference between modes, and divide power among users. Working from the channel structure, they derive direct formulas for the precoders instead of running heavy optimization.

The surface also keeps clear line-of-sight paths to each user. In simulations the design beats standard multi-antenna schemes on total data rate. Careful layering, the authors argue, can rescue the extra capacity the beams promise.

Catalog record

CREATORXiaoyan Ma, Yufei Zhao, Haixia Zhang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE56 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-14626

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Joint Precoder and Reflector Design for RIS-assisted Multi-user OAM Communication Systems Xiaoyan Ma, Yufei Zhao, Haixia Zhang Abstract Orbital angular momentum (OAM) can enhance the spectral efficiency by multipling a set of orthogonal modes on the same frequency channel. Utilizing the spatial orthogonality of different OAM modes, independent data streams can be simultaneously transmitted without interference, which enables OAM as a new form of multiple access technique for future wireless communications. Existing researches on OAM mainly focus on point-to-point transmissions in the line-of-sight (LoS) scenarios, since the perfect alignments between transmitters and receivers are strictly required to maintain the orthogonality between different OAM modes. However, in multi-user OAM communications, the perfect alignments between the transmitter and all the receivers are impossible. The phase turbulence, caused by misaligned transmitters and receivers, will lead to serious inter-mode interference, thereby the signals cannot be correctly detected at the receiver. To achieve non-line-of-sight (NLoS) OAM transmissions in misaligned scenarios, we investigate the joint precoder and reflector design for reconfigurable intelligent surface (RIS)-assisted multi-user OAM communication systems. Specifically, we propose a three-layer design at the transmitter side, which includes inter-user OAM mode interference cancellation, inter-mode self-interference elimination and the power allocation among different users. By analyzing the characteristics of the overall channels, we are able to give the specific expressions of the precoder designs, which significantly reduce the optimization complexity of the considered system. Furthermore, with the proposed three-layer precoder design, we successfully transfer the considered multi-user OAM communication system into a virtual MIMO system with distributed receiving antennas, and leveraging RIS to further enhance the sum rate performance with closed-from solutions. To verify the superiority of the proposed multi-user OAM transmission system, we compare it with traditional MIMO transmission schemes, numerical results have shown that our proposed design can achieve better sum rate performance due to the well-designed orthogonality among different receivers and OAM modes. I Introduction Orbital angular momentum (OAM) communications have gained lots of attentions due to the ability of increasing the spectral efficiency for future wireless communication networks. By utilizing the spatial orthogonality of helical phase, OAM can carry independent data streams on differnent OAM modes to achieve interference-free transmissions, which enables OAM as a new form of multiple access technology [ 30 ] . Typical approaches to generate OAM waves including using helical phase plate antenna [ 8 ] , helicoidal parabolic antenna [ 22 ] , and uniform circular array (UCA) antenna [ 24 , 9 , 32 ] . Due to the advantage of digitally generating multiple OAM-modes simultaneously, the UCA-based OAM is extensively studied [ 29 , 5 ] . Chen et al. has designed a complete OAM-based point-to-point wireless communication scheme in the LoS scenario [ 4 ] , which shows that the UCA-based OAM transmission can achieve higher spectrum efficiency than multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM). To achieve the interference-free transmission in UCA-based OAM transmissions, the perfect alignments between transmitters and receivers are strictly required [ 17 ] . But in real applications, it is hard to achieve ideal alignments, the phase turbulence, caused by misaligned transmitters and receivers, will lead to serious inter-mode interference, thereby the signals cannot be correctly detected at the receiver [ 28 ] . To overcome this problem, Suganuma et al. in [ 26 ] proposes an inter-mode interference suppression method that employs only even-numbered modes for UCA-based OAM multiplexing, the odd-numbered modes are unused to reduce the inter-mode interference from adjacent modes in the presence of the beam axis misalignment, which has lower complexity but the system capacity is also reduced. To avoid the capacity reduction, [ 3 ] further proposes a UCA-based multi-mode OAM reception method including the beam steering with the estimated angle of arrival (AoA) and the amplitude detection with the estimated distance, simulation results shows that the proposed OAM method in [ 3 ] can completely eliminate the effect of the misalignment error and approaches the performance of ideally aligned OAM channels. To further reduce the design complexity, Jing et al. in [ 15 ] proposes a fast transceiver design to reduce the impact of misaligned receivers in OAM communication systems. Existing researches on UCA-based OAM communications mainly focus on the point-to-point coaxial transmissions in the LoS scenarios [ 26 , 3 , 15 , 27 , 6 ] , i.e., the single-user OAM communications with LoS links. Few works have extended to multi-user OAM communications, since in multi-user OAM cases, it is impossible for the transmitter to be aligned with all the receivers, so the inter-mode interference becomes much more complicated to handle. In addition, the inter-user OAM interference among multiple receivers also needs to be carefully mitigated in order to improve the system performance. To address the above issues, Chen et al. in [ 2 ] utilizes a beam steering matrix to implement the diagonalization decomposition to eliminate the inter-mode interference under the assumption that the transmission distance is much larger than the radius of the UCA, thereby some specific phase parameters can be ignored to simplify the design. Besides, [ 7 ] designs a fractional programming based precoder design to maximize the sum capacity by using quadratic transformation, which has no requires for the system settings, but has higher design complexity. And [ 18 ] proposes a multi-user OAM preprocessing scheme to eliminate the co-mode and inter-mode interferences in the downlink transmissions, so the signals can be directly decoded at the receiver side. All the above multi-user OAM researches assume that the ideal LoS transmission paths are exist between the transmitter and receivers. However, this situation is difficult to guarantee in practical applications, due to the more and more complex wireless transmission environments [ 21 ] . Thereby, reconfigurable intelligent surfaces (RISs) can be introduced to proactively construct LoS links to guarantee the system performance [ 20 , 12 ] . Motivated by this, we investigate the joint precoder and reflector design for RIS-assisted multi-receiver OAM communication systems. We propose a three-layer designs at the transmitter side, two of them are used to cancel the inter-user OAM mode interference and the inter-mode self-interference in the multi-user OAM communication scenarios, thereby we can transform the overall channel matrix into the equivalent circulant matrix for canceling the phase turbulence, and the last layer is used to achieve the power allocation among different users. Furthermore, we leverage RIS to overcome unfavorable propagation environments, i.e., creating LoS transmission links to improve the system performance. Finally, the precoder design and the RIS’s reflection are jointly optimized to maximize the transmission capacity. The novelty and main contributions of this paper are summarized as follows: • We build a RIS-assisted multi-user OAM communication system, where the channel matrices between the transmitter, the RIS and all the users are derived. Based on this, we formulate the sum rate maximization problem for multi-user OAM systems through the precoder design and the RIS’s phase shift optimization. • For the precoder design, we propose a three-layer scheme, which includes inter-user OAM mode interference cancellation, inter-mode self-interference elimination and the power allocation. Besides, for the sub-matrices used to do the inter-user OAM mode interference cancellation and the inter-mode self-interference elimination, we directly give the specific expressions by analyzing the characteristics of the

Read the complete text