A sub-structuring approach for model reduction of frictionally clamped thin-walled structures

Patrick Hippold, Johann Gross, Malte Krack · 2025

Read A sub-structuring approach for model reduction of frictionally clamped thin-walled structures by Patrick Hippold, Johann Gross, Malte Krack (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-14586.txt.

Introduction

Patrick Hippold, Johann Gross, and Malte Krack propose in 2025 a sub-structuring method to shrink models of thin-walled parts held by friction clamps, like aircraft skin panels. Such parts bend and stretch together while their clamps slip and grip. Full nonlinear models are costly to run.

The split is the trick: thin regions carry the geometric nonlinearity, and support regions carry the contact nonlinearity. Standard reduction builds a compact basis for each part, with a polynomial interface step. A new scaling rule sets the static load cases that feed the nonlinear terms. Plate tests against full finite element runs validate the method. A feedback emerges: more clamp slip caps hardening, while bending raises friction loss.

Catalog record

CREATORPatrick Hippold, Johann Gross, Malte Krack
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE90 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-14586

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A sub-structuring approach for model reduction of frictionally clamped thin-walled structures Patrick Hippold, Johann Gross, Malte Krack Abstract Thin-walled structures clamped by friction joints, such as aircraft skin panels are exposed to bending-stretching coupling and frictional contact. We propose an original sub-structuring approach, where the system is divided into thin-walled and support regions, so that geometrically nonlinear behavior is relevant only in the former, and nonlinear contact behavior only in the latter. This permits to derive reduced component models, in principle, with available techniques. The Hurty-/Craig-Bampton method, combined with an interface reduction relying on an orthogonal polynomial series, is used to construct the reduction basis for each component. To model geometrically nonlinear behavior, implicit condensation is used, where an original, engineering-oriented proposition is made for the delicate scaling of the static load cases required to estimate the coefficients of the nonlinear terms. The proposed method is validated and its computational performance is assessed for the example of a plate with frictional clamping, using finite element analysis as reference. The numerical results shed light into an interesting mutual interaction: The extent of geometric hardening is limited by the reduced boundary stiffness when more sliding occurs in the clamping. On the other hand, the frictional dissipation is increased by the tangential loading induced by membrane stretching. Journal: MSSP 1 Introduction Thin-walled structures have a widespread use in aircraft, space, and wind turbine industries to achieve high strength-to-weight ratios. Examples are skin panels of wings and fuselage (airplanes, helicopters, space structures), aircraft engine cowlings, and covers or fairings (e. g. hand-held power tools, transport systems). A key feature of these systems is that both frictional contact and geometric nonlinearity are relevant. More specifically, thin-walled structures (e. g. plates, shells, panels, arches, beams) are commonly assembled via mechanical joints using fasteners (e. g. pins, rivets, bolts), so that dry frictional and unilateral interactions occur at the contact interfaces. It is well-known that the frictional interactions in mechanical joints are often the main source of mechanical damping in macroscopic built-up structures [ 1 , 2 ] . On the other hand, in the case of clamped ends, bending induces membrane stretching/compression, which, in turn, affects the bending stiffness; this bending-stretching coupling is an important example of geometric nonlinearity. Bending-stretching coupling can have a severe effect on the natural frequencies, and trigger nonlinear modal interactions already for bending deformations in the order of magnitude of the thickness of thin-walled structures [ 3 , 4 , 5 ] . In other words, the thinner the structures, the more susceptible they are to geometrically nonlinear behavior, while nonlinear frictional contact behavior determines their damping and, hence, whether they survive vibrations. Based on this, one may expect that both types of nonlinear behavior become increasingly important with the ubiquitous engineering trend towards extreme lightweight design. Nonlinear kinematic and contact behavior are important in several applications, including rotor-bearing systems (see e. g. [ 6 , 7 , 8 ] ), and blade-casing interaction (see e. g. [ 9 , 10 , 11 , 12 ] ). The focus of the present work is on frictionally clamped thin-walled structures (or more briefly: thin-walled jointed structures). For the above reasons, we are convinced that this problem class is of very high engineering relevance. Experiments have shown the relevance of nonlinear behavior of thin-walled jointed structures, see e. g. [ 13 , 14 , 15 , 16 , 17 ] . Efforts on prediction and validation have been surprisingly scarce for this problem class. The high engineering relevance of thin-walled jointed structures, and the lack of validated prediction methods was the primary motivation for the Tribomechadynamics Research Challenge [ 18 ] . This Challenge has triggered considerable research efforts [ 18 , 19 , 20 , 21 ] , and, in particular, revealed the lack of appropriate reduced modeling approaches. The aim of the present work is to develop a model reduction approach for thin-walled jointed structures. An interesting mutual interaction of both sources of nonlinear behavior is to be expected: On the one hand, the extent of bending-stretching coupling depends on the effective axial support stiffness [ 22 ] , which is highly dependent on the contact interactions and, thus, amplitude-dependent. On the other hand, one can expect that bending deformation leads to opening contacts, whereas at higher amplitudes, stretching should increase the tangential load on the contact interfaces. It is important to emphasize the multi-scale character of the problem: The local relative displacements within a frictional clamping/joint may be in the sub-micrometer range, while the maximum (absolute) vibration level of the jointed structure may be much larger (away from the clamping/joint), e. g., in the order of several millimeters. Hence, both types of nonlinear behavior can be important at the same time, perhaps at other locations within the structure/system. In the following, an overview is given on the relevant state of the art of model reduction. First, sub-structuring and component mode synthesis within linear structural dynamics is described, followed by the nonlinear coupling via contact models. Then, model reduction of geometrically nonlinear structures is addressed, and some pioneering work on sub-structuring of geometrically nonlinear components is presented. From the deficiencies of the current state of the art, the purpose of the present work is finally derived and the outline of the remaining article is explained. Although data-based model reduction enjoys increasing popularity [ 23 ] , we focus here on equation-driven methods. The intent behind this is to avoid the need to generate data from the high-fidelity model through costly simulations, and and to make it easier to obtain a large parameter space. 1.1 Reduced modeling of the dynamics of linear structures: sub-structuring, component mode synthesis In the linear case, model reduction is strongly linked to sub-structuring techniques. Here, the system is divided into smaller components (or substructures), reduced models are derived for each component, and finally the reduced system model is obtained by accounting for the behavior at the interfaces. An important advantage of sub-structuring is the modular setup: When only an individual component is exchanged, the reduced model of the modified system is obtained with minimal effort [ 24 ] . The standard approach for deriving reduced component models from a given finite element model is component mode synthesis . The by far most popular technique is the Hurty-/Craig-Bampton method [ 25 , 26 ] . Here, the nodal displacements are approximated as a linear combination of static constraint modes and a set of fixed-interface normal modes. The static constraint modes are the displacement vectors obtained for static unit displacements at the interface. These modes are needed to account for the behavior at the component interface within the assembly. The fixed-interface normal modes correspond to the eigenvectors obtained under zero displacement at the interface. Commonly, a target frequency band is specified, which spans the relevant spectrum of external and internal forces, and only the small subset of normal modes in that band is retained. By projecting the dynamic force balance onto this reduction basis, one obtains a reduced-order model. Several methods analogous to the Hurty-/Craig-Bampton method exist, for instance those relying on free- instead of fixed-interface normal modes [ 27 , 28 , 29 , 30 ] , or

Read the complete text