Emission from driven atoms in collective strong coupling with an optical cavity

V.R. Thakar, Arun Bahuleyan, V. I. Gokul, S. P. Dinesh, S. A. Rangwala · 2025

Read Emission from driven atoms in collective strong coupling with an optical cavity by V.R. Thakar, Arun Bahuleyan, V. I. Gokul, S. P. Dinesh, S. A. Rangwala (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-14392.txt.

Introduction

Thakar and co-authors study light given off by driven atoms in a strong shared link with an optical cavity, in a 2025 paper. The head byline gives initials for most authors, matching the work's team. The cavity gives off light on its own over a wide range of settings, with no input fed to the cavity mode itself.

Fine measures of photon timing reveal odd traits: damped waves at two rates, and unlike patterns for unlike polarizations of light. The authors map how emission strength ties to the drive laser and cavity tuning, and they suggest a cause for the two rate waves. Two apart paths seem to move energy from the drive to the cavity. The work may extend gentle detection methods.

Catalog record

CREATORV.R. Thakar, Arun Bahuleyan, V. I. Gokul, S. P. Dinesh, S. A. Rangwala
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-14392

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Emission from driven atoms in collective strong coupling with an optical cavity V.R. Thakar, Arun Bahuleyan, V. I. Gokul, S. P. Dinesh, S. A. Rangwala Abstract We study self sustained cavity emission from driven atoms in collective strong coupling. The cavity emission occurs over a wide range of atom-cavity and drive laser detunings without any external input to the cavity mode. Second order correlation measurements ( g 2 ​ ( τ ) g^{2}(\tau) ), further reveal unanticipated phenomenon in the observed cavity emission such as, (a) damped oscillations at two frequencies and (b) significantly distinct g 2 ​ ( τ ) g^{2}(\tau) for different polarization components. The intricate relation between cavity emission intensity, drive laser detuning and atom-cavity detunings is explained. A possible mechanism for the damped oscillations with two frequency components in g 2 ​ ( τ ) g^{2}(\tau) is suggested. Measurements show the existence of two separate polarization decoupled mechanisms with distinct photon statistics, through which energy is transferred from the drive field to the cavity field. The statistical properties and mechanisms underlying cavity emission, as presented in this work, are expected to provide valuable insights for extending non-destructive detection techniques to the regime of collective strong coupling. I Introduction Atoms in free space interacting with a near-resonant drive laser radiate via coherent and incoherent scattering. The experimentally observed spectrum of this scattered light exhibits a characteristic three peak structure called the Mollow triplet. The central peak, appearing at the drive laser frequency ( \omega_{l} ), predominantly comprises of coherently scattered photons. Symmetric sideband peaks are observed at frequencies \omega_{l}\pm\Omega_{R} , where \Omega_{R} is the generalized Rabi frequency, primarily comprising of incoherently scattered photons [ 2 , 2 , 3 , 4 ] . When an ensemble of driven atoms is confined within the spatial mode of an optical cavity, both the spatial and spectral properties of the scattered light are affected [ 5 , 6 , 7 ] . For cavity-coupled atoms, interactions are characterized by the atom-cavity coupling strength ( g_{0} ), the atomic excited state decay rate ( \Gamma ) and the cavity photon loss rate ( \kappa ) [ 8 , 9 , 10 , 11 , 12 , 13 , 14 ] . Typically, in cavities with large mode volume and low finesse, g_{0}\ll\Gamma,\kappa and hence the system is considered to be in weak coupling regime [ 13 , 14 , 7 ] . In this regime, Lezama et. al. have shown in atomic beam experiments where, as the resonant cavity frequency ( \omega_{c} ) is tuned close to the central Mollow peak at the drive laser frequency ( \omega_{c}\approx\omega_{l} ), emission can be observed along the cavity axis without any external input to the cavity mode [ 7 ] . Additionally, at sufficiently high optical densities, cavity emission was also observed when the cavity was tuned close to the red sideband of the Mollow triplet ( \omega_{c}\approx\omega_{l}-\Omega_{R} ). Figure 1: (a) Schematic of the experimental setup: mirrors M1, M2 with the piezo electric transducer (PZT) form the tunable cavity. A 767 nm laser (Ref) stabilizes the cavity. MOT beams trap the atoms and act as the drive. An optical band-pass filter (F) is used to block the stabilization laser while allowing the cavity emission (CE) to pass through. Beam splitter (BS1) is used to monitor the spatial profile of the emission on a camera (CCD). The transmitted light is coupled to a multi-mode fiber and fed to a fiber based beam splitter (BS2) whose outputs are recorded on single photon counting modules (SPCM) for g^{2}(\tau) measurement. (b) Relevant energy levels of 85 Rb and detunings for the experiment are shown. (c) Profiles of observed emission as the cavity is scanned across the F=3\leftrightarrow F^{\prime}=4 transition. Here, N_{c}\approx 20000 , \Delta_{la}\approx-2\Gamma and drive power is 25 mW. A distinct regime of atom cavity interactions is achieved when a large number of atoms collectively interact with the cavity, such that g_{0}\sqrt{N_{c}}>\Gamma,\kappa , where N_{c} is the effective number of atoms coupled to the cavity [ 15 , 16 ] . This collective strong coupling alters the resonant frequency of the cavity mode producing vacuum Rabi splitting (VRS) [ 12 , 15 , 16 , 17 , 18 , 19 , 20 ] . Hence in this regime, unlike Lezama et. al., no emission is observed at \omega_{c}\approx\omega_{l} , or \omega_{c}\approx\omega_{l}-\Omega_{R} . Instead, here, the cavity emission occurs in two cases: (a) when the cavity is red shifted relative to the atomic transition ( \omega_{c}<\omega_{a} ; \omega_{a} is the angular frequency of the atomic transition) so that the red side VRS peak matches the gain in the red sideband of the Mollow spectrum; and (b) when the cavity is blue detuned ( \omega_{c}>\omega_{a} ) to ensure the red side VRS peak matches the central peak of the Mollow spectrum [ 4 ] . The schematic of the experimental implementation and corresponding cavity emissions are shown in Fig. 1. Case (a) has been studied recently in [ 22 ] . In this work we study case (b). We investigate the range of drive laser detuning ( \Delta_{la}=(\omega_{l}-\omega_{a})/2\pi ) and the atom-cavity detuning ( \Delta_{ca}=(\omega_{c}-\omega_{a})/2\pi ) over which the blue detuned cavity emission is observed. At a fixed drive detuning, g^{2}(\tau) is measured at various \Delta_{ca} to understand the statistical properties of the cavity emission. Unexpected behavior such as, damped oscillations at two distinct frequencies, which vary with \Delta_{ca} and distinct photon statistics for different polarization components of the cavity emission are seen. The observed dependence of cavity emission on \Delta_{la} and \Delta_{ca} is discussed with a simple model of a driven two level system interacting with a cavity. A possible mechanism for the existence of two frequencies observed in the g^{2}(\tau) is suggested. II Experimental Procedure and Results Our experimental setup consists of a dilute cloud of 85 Rb atoms confined in a magneto-optical trap (MOT) co-centered with a moderate finesse optical Fabry-Perot cavity as shown in Fig. 1(a). The relevant energy levels are shown in Fig. 1(b). Further details of the experimental setup can be found in previous work [ 18 , 4 ] . The cavity emission from the output cavity mirror is passed through a 50:50 beam splitter. One arm is used to monitor the spatial profile of cavity emission while the other is collected in multi-mode fiber and fed to a second order correlation measurement setup [ 23 , 24 ] . The correlation setup consists of a multi-mode fiber based beam splitter and two single photon detectors. Over 10^{7} timestamps and detector IDs are recorded and the g^{2}(\tau) is constructed using the multi-stop multi-start algorithm available in correlation functions library of Python programming language [ 25 ] . Figure 2: (a) Measured cavity emission intensity achieved by maximization for each \Delta_{la} . The emission intensity is recorded over a duration of 100 seconds. The average rate and standard deviation are shown as blue squares with error bars. The total background counts including the dark counts are close to 80\times 10^{3} per second, shown as dashed black line. The drive laser power is kept constant at 25 mW. (b) At 25 mW drive laser power, \Delta_{la}\approx-3\Gamma with N_{c}\approx 23000 , emission is

Read the complete text