Debye Institute for Nanomaterials Science,

Utrecht University, · 2025

Read Debye Institute for Nanomaterials Science, by Utrecht University, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-14057.txt.

Introduction

Jan Cuperus, Daniel Vanmaekelbergh, and Ingmar Swart revisit a magnet and superconductor stack in a 2025 paper, based on the head byline. Such a stack was predicted to host a rare topological form of superconductivity, and earlier reports on this crystal pair disagreed. The team scanned the surface at low temperature with a fine probe tip and noise measures.

Deep inside the magnetic islands, the energy gap of the superconductor ignored the magnetism above it. At island edges, impurity states appeared at varied energies, including zero. Wide edge checks found no sign of the topological phase. The results call for a finer account of how the two layers interact.

Catalog record

CREATORUtrecht University,
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE36 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-14057

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Debye Institute for Nanomaterials Science, Utrecht University, Abstract Non-Topological Edge-Localized ysr States in CrBr 3 /NbSe 2 Heterostructures Jan P. Cuperus, Daniel Vanmaekelbergh and Ingmar Swart \star Abstract Topological superconductivity is predicted to emerge in certain magnet-superconductor hybrid systems. Here, we revisit the heterostructure of insulating monolayer CrBr 3 and NbSe 2 , for which different conclusions on the presence of topological superconductivity have been reported. Using low-temperature scanning tunneling microscopy and (shot noise) spectroscopy, we find that the superconducting gap well inside the CrBr 3 islands is not affected by magnetism. At the island edges, we observe ysr ( ysr ) states at a variety of in-gap positions, including zero energy. The absence of topological superconductivity is verified by extensive dI/dV measurements at the CrBr 3 island edges. Our results ask for a more detailed understanding of the interaction between magnetic insulators and superconductors. Copyright attribution to authors. This work is a submission to SciPost Physics. License information to appear upon publication. Publication information to appear upon publication. Received Date Accepted Date Published Date 1 Introduction At present, the road to scalable quantum computing is cumbersome due to the qubit decoherence problem [ 1 , 2 ] . Despite recent advancements in quantum error correction, the decoherence problem requires large physical and technological overhead [ 3 , 4 ] . The development of topological qubits, which have significantly lower decoherence rates, would therefore be a leap forward towards scalable quantum computing. Central to the working principle of topological qubits are mzm , exotic fermionic particles that obey non-Abelian statistics [ 5 , 6 ] . As a potential platform for the realization of mzm , topological superconductors are actively sought after in condensed matter systems. Examples of material systems that have shown signs of mzm include proximitized semiconductor nanowires [ 7 , 8 , 9 , 10 ] , proximitized topological insulators [ 11 , 12 , 13 , 14 ] , superconducting topological surface states [ 15 , 16 ] , and 1D/2D magnetic lattices on superconducting surfaces [ 17 , 18 , 19 , 20 , 21 , 22 , 23 ] . In the examples above, tsc ( tsc ) is established by the induced, effective p-wave pairing of superconductivity; the required spin degeneracy lifting is provided by a topological phase transition [ 5 ] , as has been shown for lattices of ysr states [ 23 ] . ysr states are in-gap bound states induced by the exchange interaction between magnetic atoms (historically: impurities) and Cooper pairs [ 24 , 25 , 26 , 27 ] . In the classical spin approximation [ 28 ] , the energy of ysr states ( E_{\text{YSR}} ) with respect to the Ef ( Ef ) depends on the exchange coupling J and the impurity spin S_{\text{imp}} : E_{\text{YSR}}{}=\Delta\frac{1-a^{2}}{1+a^{2}}\quad\text{with}\quad a=JS_{\text{imp}}\pi\rho_{s}. (1) Here, \Delta is the superconducting gap size and a parameterizes the impurity-substrate interaction via J , S_{\text{imp}} , and \rho_{s} , which is the density of states of the substrate at Ef in the normal state. From Eq. 1 , it follows that ysr states may be localized at Ef , in which case they would be indistinguishable from a mzm in density of states measurements. This implies that a zbp ( zbp ) in a density of states measurement is no definitive proof of mzm (or tsc ). Other arguments are thus required to label a zbp as a mzm . For example, plateaus at quantized conductance values in transport experiments would support a mzm claim [ 29 , 30 ] . Recently, the existence of a zbp at the edges of CrBr 3 islands, grown on NbSe 2 , has been interpreted as a 1D mzm [ 31 ] . It is reasoned that the magnetic insulator CrBr 3 interacts with the s -wave superconductivity of the NbSe 2 substrate, leading to ysr bands that are in a topological phase, thanks to a moiré potential [ 32 ] . The zbp observation is supported by an extensive theoretical model, which can also explain the observed interruptions of the 1D mzm . Given the impact of this finding, we set out to confirm these observations and improve the understanding of this exciting material platform. Here, we report independent stm measurements of CrBr 3 /NbSe 2 heterostructures, grown by mbe . In contrast to refs. [ 31 , 32 ] , we find no ysr bands in the interior of the CrBr 3 islands, and no 1D zbp at the edges. Instead, we find edge-localized ysr states, whose energies are spread across the superconducting gap (including very close to zero energy). The ysr states disperse along small edge segments, and the ysr state energy can be tuned by interaction with the stm tip. Our findings are in excellent agreement with the recent report of Li et al. [ 33 ] , which was published shortly after our experiments had been performed. 2 Methods Sample preparation The growth of CrBr 3 thin films was performed in an ultra-high vacuum chamber with a base pressure of ca. 5\text{\times}{10}^{-10}\text{\,}\mathrm{m}\mathrm{b}\mathrm{a}\mathrm{r} . A NbSe 2 single crystal (HQGraphene), glued to a molybdenum sample holder with conductive epoxy (EpoTek H20E), was used as the substrate. The NbSe 2 surface was prepared by cleaving, using scotch tape, in the fast entry lock (pressure lower than 4\text{\times}{10}^{-8}\text{\,}\mathrm{m}\mathrm{b}\mathrm{a}\mathrm{r} ). Prior to cleaving, the NbSe 2 sample was degassed up to 300\text{\,}\mathrm{\SIUnitSymbolCelsius} . CrBr 3 was evaporated from an e-beam evaporator (EFM3, Focus GmbH) containing a CrBr 3 single crystal (HQGraphene) in a quartz cup. A sub-monolayer coverage of crystalline CrBr 3 islands was obtained by evaporating for 6\text{\,}\mathrm{m}\mathrm{i}\mathrm{n} onto a freshly cleaved NbSe 2 crystal, which was heated to 230\text{\,}\mathrm{\SIUnitSymbolCelsius} . After growth, the sample was kept at the growth temperature for 15\text{\,}\mathrm{m}\mathrm{i}\mathrm{n} . After cooldown, the sample was transferred to the STM head, which is part of the same ultra-high vacuum system. STM/STS measurements All stm ( stm ) and sts ( sts ) measurements were performed using a USM1300 (Unisoku Co. Ltd.), operated at T=$360\text{\,}\mathrm{m}\mathrm{K}$ . A mechanically polished PtIr wire, conditioned on Au(111), was used as the STM tip. In sts experiments, dI/dV signals were recorded by lock-in detection, using a modulation frequency of either 771\text{\,}\mathrm{H}\mathrm{z} or 971\text{\,}\mathrm{H}\mathrm{z} . Modulation amplitudes V_{\text{ac}} are given in the description of each experiment. STM and STS data was organized using SPMImageTycoon [ 34 ] ; STM images were analyzed using Gwyddion [ 35 ] . Shot noise measurements We have measured the shot noise generated by the tunneling current at \mathrm{M}\mathrm{H}\mathrm{z} frequency using a recently developed amplification circuit [ 36 ] . In essence, the circuit consists of a bias tee, a superconducting LC resonator ( f_{0}=$2.8\text{\,}\mathrm{M}\mathrm{H}\mathrm{z}$ , Q\approx$1800$ ), and a hemt ( hemt ). The bias tee is used to separate low frequency signals (STM feedback, dI/dV signal) from high frequency signals, whereas the LC resonator converts current noise from the junction into voltage noise at the gate of the HEMT. Lastly, the hemt is used to match the high impedance circuit to the 50\text{\,}\mathrm{\SIUnitSymbolOhm} impedance of a transmission line. All these components are located in the vicinity of the 1\text{\,}\mathrm{K} pot, such that their

Read the complete text