Topological semimetal with coexisting nodal points and nodal lines
Bing-Bing Luo, Ming-Jian Gao, Jun-Hong An · 2025
Read Topological semimetal with coexisting nodal points and nodal lines by Bing-Bing Luo, Ming-Jian Gao, Jun-Hong An (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-13636.txt.
Introduction
Bing-Bing Luo, Ming-Jian Gao, and Jun-Hong An design a topological semimetal that hosts two kinds of nodes at once, in a 2025 paper. Semimetals of this family are sorted by their nodes: points, lines, or surfaces where electron bands touch. A material with both nodal points and nodal lines is rarely reported.
Their scheme builds exactly that hybrid, and it shows both hallmark surface signatures, hinge Fermi arcs and drumhead states. Shaking the system with a periodic drive reshapes it further, into a hybrid-order phase with richer line structures, and onward into a first-order phase the static system cannot reach. The authors say the recipe widens the semimetal family and grounds future device exploration.
Catalog record
| CREATOR | Bing-Bing Luo, Ming-Jian Gao, Jun-Hong An |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-13636
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Topological semimetal with coexisting nodal points and nodal lines Bing-Bing Luo, Ming-Jian Gao, Jun-Hong An Abstract Featuring exotic quantum transport and surface states, topological semimetals can be classified into nodal-point, nodal-line, and nodal-surface semimetals according to the degeneracy and dimensionality of their nodes. However, a topological semimetal that possesses both nodal points and nodal lines is rarely reported. Here, we propose a scheme to construct this type of topological semimetal, which simultaneously exhibits hinge Fermi arcs and drumhead surface states. Then, by applying periodic driving on the system, we find a hybrid-order topological semimetal with nodal points and rich nodal-line structures and its conversion into a first-order topological semimetal, which are absent in a static system. Our results enrich the family of topological semimetals, and establish a foundation for further exploration of their potential applications. I Introduction The topological phases of matter, which are broadly classified as insulators and semimetals according to energy band gaps, have emerged as a leading research domain in condensed matter physics [ 1 , 2 , 3 , 4 , 5 ] . The topological insulator has been extended from the traditional topological energy band theory to a higher-order one [ 6 , 7 , 8 , 9 , 10 ] . Recently, significant research attention has focused on topological semimetals. Depending on the symmetry endowed degeneracy and dimensionality of their nodes, topological semimetals can be classified as Dirac [ 11 , 12 , 13 , 14 , 15 , 16 ] , Weyl [ 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 ] , nodal-line [ 25 , 26 , 27 , 28 ] , and nodal-surface [ 29 ] semimetals. In contrast to Dirac and Weyl semimetals, which feature discrete points at the intersection of the conduction and valence bands, nodal-line and -surface semimetals are distinguished by the formation of a one-dimensional line and two-dimensional (2D) surface at the intersection of the energy bands, respectively. It has been demonstrated that distinct topological semimetals can be converted into each other. Phase transitions from nodal-line and Dirac semimetals to a Weyl one have been created by breaking mirror symmetry [ 30 ] and introducing circularly polarized light [ 31 , 32 , 33 ] . An addition of a spin-orbit coupling has been shown to convert a nodal-line semimetal into a Dirac one [ 34 , 35 ] . By introducing a \mathcal{PT} -invariant perturbation, each Dirac point is expanded into a nodal ring that separates the hinge Fermi arcs, which signifies a second-order nodal-line semimetal [ 28 ] . However, the topological semimetals in previous studies possess only one type, either a nodal-line semimetal or a nodal-point semimetal. From an application perspective, the transport properties of different orders and types of topological semimetals are generally different [ 36 , 37 ] . A nodal-point semimetal not only induces a negative magnetoresistance due to the chiral anomaly [ 38 , 39 , 40 , 41 , 42 , 43 ] , but also exhibits high carrier mobility enabling an ultra-low-power electronic transport [ 44 ] . A nodal-line semimetal exhibits a heightened sensitivity to surface perturbations and strain and leads to a strong anisotropy in the optical and transport properties due to its drumhead surface states [ 45 , 46 , 47 ] . The nodal-line semimetals realized in photonic crystal platforms have been used to design optical waveguides with topologically protected edge states [ 47 ] . They can effectively suppress backscattering and provide the basis for high-sensitivity sensors and optical switches. The photonic Weyl metamaterial provides a new way to generate vector and vortex beams [ 48 ] . In circuit systems, a topological semimetal can be used to achieve robust signal transmission with backscattering suppression [ 49 , 50 , 51 ] . It is expected that topological semimetals with coexisting nodal points and lines may simultaneously exploit these peculiar features to design multifunctional devices. Thus, it is necessary to find a topological semimetal that inherits both nodal lines and points, as well as both first and second orders. Although hybrid-order topological insulators and superconductors have been widely studied [ 52 , 53 , 54 , 55 , 56 , 57 , 58 , 59 , 60 ] , a hybrid-order topological semimetal with coexisting nodal points and lines has seldom been reported. Figure 1: (a) Schematic diagram of a lattice configuration with intracell hopping \gamma , intercell hopping \lambda , interlayer hopping \eta/2 , and diagonal intercell hopping i\mu/4 (green lines along the arrow direction) with inverse hopping -i\mu/4 (green lines inverse to the arrow direction), respectively. The dashed lines denote the hopping rate with a \pi -phase difference from their corresponding solid lines. (b) Energy spectrum (blue dots) and dispersion relation along the high-symmetry line k=0 ( \pi ) in red solid (dashed) lines. (c) Hinge Fermi arcs with the number of cells N_{x}=N_{y}=30 . (d) Quadrupole moment P changes with k_{z} . We use \lambda=\mu=0 , \gamma=0.3f , and \eta=0.6f . f is an energy scale to make the hopping rates dimensionless. Inspired by the fact that the coherent control by periodic driving called Floquet engineering has become a powerful tool to create novel topological phases [ 61 , 62 , 63 , 64 , 65 , 66 , 67 , 68 ] , we propose a scheme to generate a hybrid-order topological semimetal with coexisting nodal points and nodal lines in a three-dimensional (3D) system. First, we find that a second-order Dirac semimetal can be converted into a second-order topological semimetal with coexisting nodal points and nodal lines by adding a hopping term that breaks the time-reversal symmetry. Second, such an exotic topological matter is further changed into either a hybrid-order or a purely first-order topological semimetal with coexisting nodal points and rich nodal lines by Floquet engineering. Our results enrich the family of topological semimetals and supply an extra control dimension for exploring their applications in designing multifunctional devices. The paper is organized as follows. A static system supporting a second-order topological semimetal with coexisting nodal points and lines and its topological characterization are given in Sec. II . A hybrid-order topological semimetal with nodal points and rich nodal-line structures and its conversion to a purely first-order topological semimetal under Floquet engineering are studied in Sec. III . Finally, a discussion and a summary are given in Sec. IV . II Static system We investigate a system of spinless fermions moving on a 3D lattice [see Fig. 1 (a)]. Its momentum-space Hamiltonian reads \hat{H}=\sum_{\textbf{k}}\hat{C}^{\dagger}_{\textbf{k}}\mathcal{H} ( k ) \hat{C}_{\textbf{k}} with \hat{C}^{\dagger}_{\textbf{k}} = ( \hat{C}^{\dagger}_{\textbf{k},1} \hat{C}^{\dagger}_{\textbf{k},2} \hat{C}^{\dagger}_{\textbf{k},3} \hat{C}^{\dagger}_{\textbf{k},4} ) and \mathcal{H}(\textbf{k})=h_{1}\Gamma_{5}+h_{2}\Gamma_{3}+h_{3}\Gamma_{2}+h_{4}\Gamma_{1}+h_{5}\Gamma_{4}, (1) where h_{1}=\gamma+\chi(k_{z})\textrm{cos}k_{x} , h_{2}=-\chi(k_{z})\textrm{sin}k_{x} , h_{3}=\gamma+\chi(k_{z})\textrm{cos}k_{y} , h_{4}=\chi(k_{z})\textrm{sin}k_{y} , h_{5}=\mu\sin k_{x}\sin k_{y} , and \chi(k_{z})=\lambda+\eta\cos k_{z} . Each unit cell has four sublattices. \gamma is the intracell hopping rate, \lambda is the intercell hopping rate, \eta is the interlayer hopping rate, \mu is the nearest-neighbor diagonal intercell hopping rate, \Gamma_{1,2,3}=\tau_{2}\sigma_{1,2,3} , \Gamma_{4}=\tau_{1}\sigma_{2} , and \Gamma_{5}=\tau_{1}\sigma_{0} , where \tau_{i} and \sigma_{i} are Pauli matrices, and \tau_{0} and \sigma_{0} are identity matrices. Figure 2: (a) Energy spectrum (blue dots), quadrupole moment P (green lines), and dispersion relation along the high-symmetry line k=0