Overcoming temperature limitations in laser cooling using dressed states and diamond vacancies
Paul Eastham, Conor Murphy, Luisa Toledo Tude · 2025
Read Overcoming temperature limitations in laser cooling using dressed states and diamond vacancies by Paul Eastham, Conor Murphy, Luisa Toledo Tude (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-13559.txt.
Introduction
Paul Eastham, Conor Murphy, and Luisa Toledo Tude propose a way to laser-cool solids below the temperature floor of existing methods. Standard laser cooling relies on anti-Stokes fluorescence from impurities, and the impurity's level spacing sets a minimum reachable temperature. Their alternative uses strong laser driving to form dressed states.
Dressed states create a spectrum whose gaps can be tuned to optimize heat absorption. The resulting cycle could in principle operate at any temperature with power near the thermodynamic maximum. Non-radiative decay and other heating will compete, the authors note. Still, the scheme could reach temperatures impossible for fluorescence-based cooling, with diamond vacancies as the test platform.
Catalog record
| CREATOR | Paul Eastham, Conor Murphy, Luisa Toledo Tude |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 12 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-13559
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Overcoming temperature limitations in laser cooling using dressed states and diamond vacancies Paul Eastham, Conor Murphy, Luisa Toledo Tude Abstract The established approach to laser cooling of solids relies on anti-Stokes fluorescence, for example from rare earth impurities in glass. Although successful, there is a minimum temperature to which such a process can cool set by the electronic level spacing in the impurity. We propose an alternative method which does not suffer from this limitation. Our approach relies on the formation of dressed states under strong laser driving, which generates a spectrum in which the gaps can be tuned to optimize the heat absorption. This allows for a cooling cycle which operates at any temperature with a power comparable to the maximum dictated by thermodynamic principles. While this cooling cycle will compete with heating due to non-radiative decay and other mechanisms, it could in principle allow laser cooling to temperatures which are unachievable with anti-Stokes fluorescence. a]School of Physics, Trinity College Dublin, Dublin 2, Ireland keywords Laser cooling, thermodynamics, quantum control, color centers 1 INTRODUCTION The possibility of using light to cool solids is a model thermodynamic process and has great technological potential. It is well established [ 1 , 2 , 3 ] that anti-Stokes fluorescence can cool rare-earth doped glasses, with experiments reaching temperatures below 100 K. However, this approaches the lower limit that is achievable. In this contribution, we describe our recent work [ 4 ] proposing and analyzing a different technique, which we call Dressed-state Anti-Stokes Cooling (DASC), that does not suffer from this limitation. 2 DRESSED-STATE ANTI-STOKES COOLING The simplest model which allows anti-Stokes cooling is a three-level system, which for definiteness we suppose comprises a single ground state and two excited states. Optical driving of the lowest-energy transition will transfer population from the ground state to the lower excited state. Heat is then absorbed from the host crystal, transferring this population to the upper excited state, and the cycle is closed by radiative decay back to the ground state. This cycle, overall, absorbs one photon from the driving laser and reemits at higher energy with the extraction of heat from the surroundings. The transition between the excited states involves the absorption of a single phonon, of energy equal to the excited-state splitting \Delta E , and occurs with a rate proportional to the number of such phonons. Thus, the cooling power vanishes exponentially below a temperature kT\sim\Delta E . To avoid this we propose to use strong near-resonant excitation of a dipole-active impurity. The key idea is that phonon transitions then occur between laser-dressed states, whose wavefunctions and energies are modified as occurs in the Autler-Townes/a.c.-Stark effect. This allows the cooling power to be maximized by ensuring that the defect can effectively absorb heat at any temperature. This is expected to occur when there is a transition of energy \sim kT , since smaller gaps absorb less energy per cycle, whereas larger ones lead to much slower cycles. In a recent paper [ 4 ] , we analyzed this process using a detailed model of the silicon-vacancy (SiV) defect in diamond [ 5 ] . This is one of a family of group-IV color centers that are of interest for solid-state quantum optics and quantum technology [ 6 ] . It is a one-hole system with two spin states. The states in each spin sector form a four-level system, with two levels in a ground-state manifold, and two in an excited-state manifold. This structure is directly observed in the photoluminescence, which at low temperature shows four narrow peaks in the spectrum [ 7 , 5 ] . As we showed theoretically, driving on the lowest (or second-lowest) of these lines would allow the implementation of a conventional anti-Stokes cooling process, but this provides only a small cooling power over the temperature ranges of interest, between 1 and 100 K. Analyzing this process in the strong-driving regime, using a Born-Markov approach extended to compute heat flows [ 8 ] , we found that much larger cooling powers could be achieved due to the level-mixing effects produced by the driving field. The resulting cooling occurs over a range of driving frequencies, making the process potentially robust against inhomogeneous broadening. There are, of course, competing heating processes which will make observing cooling using this approach challenging. Non-radiative decay from the excited to the ground state manifolds will produce a strong heating effect which, due to the mismatch of optical and phonon energies, overwhelms the cooling process unless the quantum efficiency is very high. This is also a challenge in anti-Stokes cooling. It is exacerbated here not because of the particular choice of process, but because we seek to cool at low temperatures. As we discuss further in the following, one can argue from thermodynamic principles that there is a maximum cooling power for a single emitter which is on the order of kT per cycle. As our results show, DASC can achieve cooling powers comparable to this bound. However in DASC, and indeed in any optical cooling scheme, a single non-radiative decay for the emitter will produce heat on the order of an optical photon energy, E_{\mathrm{opt}} . Non-radiative decay can, then, only occur for fewer than 1 in E_{\mathrm{opt}}/(kT) cycles if cooling is to dominate. At 10\, K this means that, with an optical energy E_{\mathrm{opt}}=1 eV, only 1 in 1000 decays can be non-radiative, and the internal quantum efficiency must be greater than 99.9\% . Figure 1: Computed emission spectrum from an SiV at 20K, reproduced from Ref. [ 4 ] . All the three possible polarizations are driven at a single frequency with equal strengths, corresponding to a Rabi splitting of 2\times 10^{-1}\,\mathrm{rad\;ps^{-1}} . The different polarizations of the output are combined to show the total intensity. Frequencies are measured relative to the zero-phonon line center, f_{\mathrm{ZPL}} , and the driving is at f-f_{\mathrm{ZPL}}=-400 GHz. The emission frequencies in photoluminescence, corresponding to the transitions in the four-level system, are indicated by vertical grey lines. The spectrum comprises the elastic scattering from the laser, with two sidebands, and four peaks near to the photoluminescence lines. This spectrum corresponds to inelastic scattering of the driving laser in the strong-driving regime. The intensity on the blue side of the driving laser is greater than that on the red side, implying that energy is being removed from the phonon environment. While very high, we believe that it may be possible for these quantum efficiencies to be reached in diamond vacancies. A low-temperature quantum efficiency of 30\% has been inferred [ 5 ] from the comparison of the dipole moment, deduced the Rabi oscillations at 5 K, and the \sim 1 ns decay time of the photoluminescence. However, quantum efficiencies of 67\% have been measured at room temperature [ 9 ] . There the dominant contribution is expected to be from thermally activated processes which will drop away at lower temperatures, leaving the possibility that quantum efficiencies close to 100% may be achievable in the absence of confounding material effects such as strain. Measuring these quantum efficiencies directly may be difficult, however, observing cooling or heating would allow them to be inferred. The heat extraction in the DASC process