Effects of valley splitting on resonant-tunneling readout of spin qubits

Tetsufumi Tanamoto, Keiji Ono · 2025

Read Effects of valley splitting on resonant-tunneling readout of spin qubits by Tetsufumi Tanamoto, Keiji Ono (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-13289.txt.

Introduction

Tetsufumi Tanamoto and Keiji Ono study how split valley states affect read out of spin qubits in a triple dot rig, in a 2025 paper. Valley split is a small energy gap that shifts with how each dot was made. Read out uses a bent current trait under a tunnel effect.

When valley split is less than magnet split, bent current can help read out if dot gaps stay near even. When valley split is more than magnet split, uneven gaps hurt read out. In both cases, read times can stay far below loss times. Fault proof codes may thus still work with valley split in place.

Catalog record

CREATORTetsufumi Tanamoto, Keiji Ono
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE76 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-13289

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Effects of valley splitting on resonant-tunneling readout of spin qubits Tetsufumi Tanamoto, Keiji Ono Abstract The effect of valley splitting on the readout of qubit states is theoretically investigated in a three-quantum-dot (QD) system. A single unit of the three-QD system consists of qubit-QDs and a channel-QD that is connected to a conventional transistor. The nonlinear source–drain current characteristics under resonant-tunneling effects are used to distinguish different qubit states. Using nonequilibrium Green functions, the current formula for the three-QD system is derived when each QD has two valley energy levels. Two valley states in each QD are considered to be affected by variations in the fabrication process. We found that when valley splitting is smaller than Zeeman splitting, the current nonlinearity can improve the readout, provided that the nonuniformity of the valley energy levels is small. Conversely, when the valley splitting is larger than the Zeeman splitting, the nonuniformity degraded the readout. In both cases, we showed that there are regions where the measurement time t meas t_{\rm meas} is much less than the decoherence time t dec t_{\rm dec} such that t dec / t meas > 100 t_{\rm dec}/t_{\rm meas}>100 . This suggests that less than 1% measurement error is anticipated, which opens up the possibility for implementing surface codes even in the presence of valley splitting. I Introduction Background — Quantum computers have undergone rapid developments, targeting near-future applications [ 1 , 2 , 3 ] . In this respect, silicon qubits have attracted attention because of their affinity to advanced semiconductor circuits, which leads to the integration of qubits to build surface codes and control complementary metal-oxide semiconductor (CMOS) circuits on the same chip [ 4 , 5 ] . At present, advanced commercial transistors have entered the 2-nm gate-length generation with three-dimensional stacked structures [ 6 , 7 , 8 , 9 , 10 ] . Because quantum effects become more prominent as the device size decreases, semiconductor qubits can get the most benefit from advanced semiconductor technologies [ 11 ] . Readout of spin qubits —The reading out of qubit states is one of the most important process to control the qubit. The Elzerman readout [ 12 ] , which is currently a mainstream for silicon qubits, uses a Zeeman-split spin 1/2 electron in a quantum dot (QD) as the qubit. The experimental setup of the Elzerman readout consists of a QD, an electrode (reservoir) weakly tunnel-coupled to the QD, and a charge sensor that monitors the charge state of the QD [ 13 , 14 ] . The charge sensor detects the spin-dependent charge transfer between the QD and the electrode. However, this setup of the electrodes and the charge sensor for each qubit requires a large circuit area, when the qubits are integrated. In addition, each electrode and charge sensor requires multiple wiring, so the wiring circuitry is inevitably complex. These are factors that limit the large-scale integration of qubits with the Elzerman readout. Regarding this readout process, we proposed a different method, a resonant-tunneling readout [ 15 ] . This method is superior to the Elzerman readout in terms of the small number of circuit parts required for readout, and the simplicity of the circuit wiring, which are suitable for large-scale integration of qubits. In the resonant-tunneling readout, a ”channel-QD” is tunnel-coupled to a qubit (Zeeman-split spin 1/2 of a single electron QD). The channel-QD is also tunnel-coupled to the source and drain electrodes, and generates the resonant-tunneling current between the source and drain (Fig.1). The qubit is read out by utilizing the fact that the resonant-tunneling current depends on the qubit state ( \uparrow or \downarrow ). In a system in which two QDs are coupled to one channel-QD, it is possible to distinguish between the three states of the two qubits: \downarrow\downarrow , \downarrow\uparrow or \uparrow\downarrow , and \uparrow\uparrow (Fig.1(b)). Therefore, when qubits and channel-QDs are arranged side by side (Fig.1(a)), it is possible to integrate all qubits and readout the results of the qubit states. In addition to the qubit readout mechanism, when no source-drain voltage is applied, the channel-QD also functions as a coupler that mediates the coupling of two adjacent qubits (two qubit operation). More details are provided below. Valley-splitting problem — Bulk silicon conduction band has sixfold degenerated valley states. The degenerated valley states are split into the upper four states and lower two states in silicon qubits. The upper four states can be separated by the sharp interface, and the lowers two energy states (which are written as E_{\rm V+} and E_{\rm V-} in the following) have to be considered in the process of the spin qubit operations. It has been pointed out that the nearly degenerate valley degrees of freedom have a negative effect on qubit operations [ 16 , 17 ] . Many researchers have utilized these additional degrees of freedom of the valley states as new qubit states to control the spin states [ 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 ] . However, many past proposals, including our proposal above, did not appropriately take the valley degree of freedom into account, from viewpoint of the integrated qubit system. Figure 1: Qubit structure proposed in Ref. [ 15 ] , where there were no valley splittings. (a) Qubit array which consist of the n qubits and transistors. The qubits (yellow circle) and the channel (green circle) are placed side by side. A control gate attached to the qubit array controls the electric potentials of the qubits. The channel current I_{\rm D} reflects the qubit states. Static magnetic field B_{z} is applied. (b) Single unit of the three-QD system calculated in this study. The channel-QD is directly connected to the conventional transistor. \Gamma_{\alpha} denotes the tunneling couplings between the electrodes ( \alpha=S,D , s=\pm 1/2 ), and W_{ij} s are the coupling strengths between the QDs. (c) The QD band structures for x and y directions of Fig.(b). The thick arrows express electron spins. By changing the energy level of the channel-QD, two modes are available: coupling ( V_{\rm D}=0 ) and readout ( V_{\rm D}\neq 0 ) modes. The circles denote the energy level to which electrons of channel-QD can tunnel. E_{i} ( i=1,2,3 ) represents resonant energy levels of QDs without the magnetic field in the readout mode. Purpose of this study — Here, we describe how the existence of the valley splitting affects the readout process using the resonant-tunneling of Ref. [ 15 ] . In order to treat the valley splittings, we newly formulate the transport properties of three coupled QDs in which each QD has two energy levels, by using Green function method. Note that a single energy level is assumed in most of the conventional cases [ 32 , 33 , 34 ] . By extending the theory to the case of two energy levels in each QD, we can treat more general case regarding the three-QD system. Outline of this study — The rest of this study is organized as follows. In Section II , our basic model is explained, and in Section III.1 the

Read the complete text