Ferromagnetic Semiconductor Nanotubes with Room Curie Temperatures

Jia-Wen Li, Gang Su, Bo Gu · 2025

Read Ferromagnetic Semiconductor Nanotubes with Room Curie Temperatures by Jia-Wen Li, Gang Su, Bo Gu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-13287.txt.

Introduction

Jia-Wen Li, Gang Su, and Bo Gu propose a route to magnetic semiconductor nanotubes that stay magnetic at room temperature. Their 2025 paper addresses a standing challenge in spintronics, where devices would use electron spin as well as charge. Flat magnetic materials have recently reached high Curie temperatures, and plain nanotubes have been made from related non-magnetic sheets, which suggests rolling magnetic monolayers into tubes.

The team predicts a family of such tubes built from metal and chalcogen pairs. Two chromium zigzag tubes, with sulfur and with tellurium, keep their magnetism above 300 kelvin when the tube runs eighteen unit cells around. The uneven strain across a tube wall also generates a small electric polarization pointing inward. The authors frame the results as both a new material class and a recipe: start from the flat high-temperature magnets already made, and roll them.

Catalog record

CREATORJia-Wen Li, Gang Su, Bo Gu
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-13287

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ferromagnetic Semiconductor Nanotubes with Room Curie Temperatures Jia-Wen Li, Gang Su, Bo Gu Abstract Realizing ferromagnetic semiconductors with room Curie temperature T C T\rm_{C} remains a challenge in spintronics. Inspired by the recent experimental progress on the nanotubes based on 2D van der Waals non-magnetic transition-metal dichalcogenides, magnetic nanotubes based on monolayer ferromagnetic materials are highly possible. Here, we proposed a way how to obtain high T C T\rm_{C} ferromagnetic semiconductor nanotubes. Some high T C T\rm_{C} ferromagnetic semiconductors are predicted in the MX 2 nanotubes (M = V, Cr, Mn, Fe, Co, Ni; X = S, Se, Te), including CrS 2 and CrTe 2 zigzag nanotubes with the diameter of 18 unit cells showing T C T\rm_{C} above 300 K. In addition, due to the strain gradient in walls of nanotubes, an electrical polarization at level of 0.1 0.1 eV/Å inward of the radial direction is obtained. Our results not only present novel ferromagnetic semiconductor nanotubes with room Curie temperature but also be indicative of how to obtain such nanotubes based on experimentally obtained 2D high T C T\rm_{C} ferromagnetic metals. Introduction. — Due to the interesting properties, there are many promising applications of magnetic semiconductors [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 15 , 17 , 18 , 19 ] , such as spin injection maser [ 19 , 18 ] , circular polarized light emitting diodes [ 10 ] , magnetic diode and p-n junction [ 11 , 12 , 13 , 14 ] , magnetic tunnel junction [ 15 , 16 , 15 ] and spin valve structures [ 17 ] , etc. These applications require magnetic semiconductors with high Curie temperature T{\rm{}_{C}} above room temperature. However, ferromagnetic semiconductors show low T{\rm{}_{C}} far below room temperature, which largely limits their applications. In 2017, the successful synthesis of two-dimensional (2D) van der Waals ferromagnetic semiconductors CrI 3 [ 20 ] and Cr 2 Ge 2 Te 6 [ 21 ] in experiments has attracted extensive attention to 2D ferromagnetic semiconductors. According to Mermin-Wagner theorem [ 22 ] , the magnetic anisotropy is essential to produce long-range magnetic order in 2D systems. Recently, with great progress of 2D magnetic materials in experiments, more 2D ferromagnetic materials have been obtained, where some are ferromagnetic semiconductors with T\rm_{C} far below room temperature [ 23 , 24 , 25 , 26 , 27 ] , and some are ferromagnetic metals with high T\rm_{C} above room temperature [ 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 , 43 ] . Figure 1: Metal-semiconductor transition in CrS 2 from monolayer to zigzag nanotube. (a) Crystal structure of monolayer CrS 2 . (b) Spin polarized band structure of monolayer CrS 2 , demonstrating metallic behavior. (c) Crystal structure of zigzag CrS 2 nanotube. (d) Spin-polarized band structure of the zigzag CrS 2 nanotube, demonstrating semiconducting behavior. Only spin up bands appear near the Fermi energy due to spin splitting. Figure 2: Calculated properties of zigzag CrS 2 , CrTe 2 and VSe 2 nanotubes. (a) The results of strain energies E\rm_{strain} . E\rm_{strain} of MoS 2 nanotubes with diameter about 3.9 nm in experiment is about 0.05 eV/atom [ 44 ] , of BN nanotubes with diameter of 0.45 nm is about 0.25 eV/atom [ 45 ] , of CNT with diameter of 1 nm is about 0.10 eV/atom [ 46 , 47 ] . These values are shown for reference. (b) The results of band gaps. (c) Results of Curie temperatures T\rm_{C} obtained by DFT calculation and Monte Carlo simulation. (d) The results of effective radial electrical field E\rm_{r} inward along the radius. The results of room temperature ferromagnetic semiconductors of zigzag CrS 2 and CrTe 2 nanotubes are emphasized by circles. Since the first report of carbon nanotubes (CNTs) [ 48 ] , one-dimensional materials based on 2D sheets have attracted attention because of their unique mechanical and electrical properties due to their low dimensional structures. The structures of CNTs consist of nano-dimensions made up of rolled sheets of 2D graphite. There are many ways with which a sheet of graphite can be rolled up to form a tube such as zigzag, chiral and armchair, and these are the names given to different types and could be controlled in experiments [ 49 , 50 ] . In addition, the diameters of nanotubes could be small as sub-nm level [ 46 , 47 , 51 , 52 , 45 ] . There are some applications of CNT [ 49 , 53 , 54 , 55 , 56 , 57 , 58 , 59 , 60 , 61 , 62 , 63 , 64 ] , including chemical sensors [ 55 ] , biomedical [ 58 , 56 , 57 ] , biosensors [ 62 , 64 ] and digital electronics [ 59 , 63 ] , etc. There are some studies on magnetic nanotubes [ 65 , 66 , 67 , 68 , 69 , 70 , 71 , 72 , 73 , 74 , 75 , 76 ] . They were prepared by adding magnetic particles to non-magnetic nanotubes such as CNT doped with magnetic atoms, or ferromagnetic materials such as Fe, Co, and alloys, etc [ 65 , 66 , 67 , 68 , 69 , 70 , 71 ] . The nonreciprocal spin waves were observed in magnetic nanotubes under magnetic field [ 70 ] . Ni-doped silicon nanotubes were reported to be room temperature ferromagnetic semiconductor with tiny saturation magnetization [ 71 ] . It has some interesting applications, such as platform for studying the magnetochiral effect, drug delivery, sorbent, catalysis and sensor [ 70 , 67 , 68 , 69 ] . Theoretical studies have demonstrated that magnetic nanotubes exhibit unique magnetic properties, including distinct spin-wave dynamics, domain wall propagation, unidirectional magnonic waveguiding, etc [ 72 , 73 , 74 , 75 , 76 ] . With the fast development of 2D van der Waals transition-metal dichalcogenides (TMD) materials, there are many experiments of TMD nanotubes [ 77 , 78 , 79 , 80 , 81 , 82 , 83 , 84 , 85 , 86 ] , including WS 2 [ 82 , 83 , 84 , 86 ] , WSe 2 [ 81 ] and MoS 2 [ 79 ] . They show interesting properties, of superconductivity [ 82 , 83 ] and photovoltaic effect [ 84 , 86 ] . In addition, the density functional theory (DFT) was applied to explore the properties of TMD nanotubes [ 87 , 88 , 89 , 90 , 91 , 92 , 93 , 94 , 95 , 96 ] . In this letter, we theoretically predict high T\rm_{C} ferromagnetic semiconductor nanotubes based on experimentally known 2D high T\rm_{C} ferromagnetic metals. Considering the high T\rm_{C} in experiments, ferromagnetic monolayers 1T-MX 2 (M = V, Cr, Mn, Fe, Co, Ni; X = S, Se, Te) were chosen as the initial 2D material

Read the complete text