Cavity Mode Initialization via a Rabi Driven Qubit

N. Karaev, E. Blumenthal, G. Moshel, A. A. Diringer, S. Hacohen-Gourgy · 2025

Read Cavity Mode Initialization via a Rabi Driven Qubit by N. Karaev, E. Blumenthal, G. Moshel, A. A. Diringer, S. Hacohen-Gourgy (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-12710.txt.

Introduction

Karaev, Blumenthal, Moshel, Diringer, and Hacohen-Gourgy wrote this paper in two thousand twenty-five. It gives a fresh way to set a microwave cavity mode to a chosen state. Quantum computers with long-lived memory modes must do this chore often.

Their method, Rabi Driven Reset, moves the state of the memory mode into a lossy mode that drains it away. A qubit driven in a Rabi pattern links the two modes through sideband tones. Once drained, the memory mode can be set to any coherent state sought. Computer models of the scheme predict setup times about ten times faster than the current coupling method. The gain could ease a routine but slow step in such machines.

Catalog record

CREATORN. Karaev, E. Blumenthal, G. Moshel, A. A. Diringer, S. Hacohen-Gourgy
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE44 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-12710

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Cavity Mode Initialization via a Rabi Driven Qubit N. Karaev, E. Blumenthal, G. Moshel, A. A. Diringer, S. Hacohen-Gourgy Abstract Microwave cavity modes with long coherence times are used in many different quantum computing systems. During normal operation of such systems, these modes, called memory modes, often need to be set to different coherent photonic occupations. In this work we present a novel technique we call Rabi Driven Reset in which the state of a memory mode is transferred into a decaying mode. This is done through a Rabi driven qubit which is coupled to both modes via sideband driving tones. The outcome of the method is the initialization of the memory mode at any required coherent state. Simulations are presented to demonstrate the effectiveness of this technique, along with a comparison to an existing coupling method. Our simulations predict an improvement of an order of magnitude in initialization times compared to existing methods. I Introduction Quantum state initialization is a fundamental requirement for quantum technologies, both in sensing and in quantum information processing Nielsen and Chuang 2012 . A trivial quantum state initialization (or reset) method is to let the system decay to some steady state over time. However, as quantum systems are engineered to reach longer lifetimes, the reset time grows longer as well. As such, experiment repetition rates are limited by reset times which are orders of magnitude longer than coherent gate times. For example, in state of the art circuit quantum electrodynamics (circuit QED) systems, the operation times are tens of nanoseconds Eickbusch et al. 2022 whereas the decay times are hundreds of microseconds Copetudo et al. 2024 . Thus, the task of fast and efficient quantum state initialization proves to be a significant challenge which must be overcome. Regardless of the physical platform, achieving reset that is faster than the decay time can only be realized through increased dissipation that can be turned on or off at will. This can be done either by measurement and feedback or by strongly coupling the system to a cold bath Schliesser et al. 2008 ; Peik et al. 1999 ; Hamann et al. 1998 ; Leibrandt et al. 2009 ; Meyer et al. 2019 . The two methods are seemingly different, but were shown to be equivalent Cruikshank and Jacobs 2017 . Currently one of the most promising schemes for quantum information encoding is continuous variable encoding Joshi et al. 2021 . Specifically in circuit QED, continuous variable encoding has seen significant growth in recent years Campagne-Ibarcq et al. 2020 ; Lescanne et al. 2020 . In this platform, a transmon qubit is typically used as an ancilla for the control and readout of a long lived mode, called a memory mode, that stores the quantum state. Two reset methods for the memory mode have previously been employed Sivak et al. 2023 ; Pfaff et al. 2017 ; Milul et al. 2023 . In the first method, shown in Ref. Sivak et al. 2023 , a memory mode excitation is transferred to the qubit which is subsequently reset using a measurement feedback protocol Ristè et al. 2012 . This cycle is repeated until the memory mode reaches a state sufficiently close to vacuum. Unfortunately, due to measurement and feedback time overheads, this method becomes impractical for cooling large photon numbers. In the second method, shown in Refs. Pfaff et al. 2017 ; Milul et al. 2023 the memory mode was coupled to a short lived mode, called a readout mode, using a pump tone which utilized the nonlinearity of an ancillary transmon. This method is seemingly suitable for cooling larger photon numbers, but in practice can only reach low cooling rates as it is limited by the anharmonicity of the transmon. In the current work we present an autonomous dissipative cooling method for the memory mode in a continuous variable circuit QED setup, that can surpass the cooling rates of previous methods. By Rabi driving the qubit and coupling it to both a memory mode and a readout mode using sideband drive tones, we are able to create significant coupling between the modes. The Rabi driven qubit is at an advantage compared to an undriven qubit since its frequency is much smaller than a qubit’s typical frequency. This allows for the use of smaller detunings, which in turn increases the efficiency of the process. A similar sideband cooling method was previously implemented to cool down a transmon qubit Murch et al. 2012 , and here we expand it to cool a memory mode as well. This sideband cooling initializes the memory mode in a coherent state. To prepare the vacuum state a displacement with negligible duration can be applied. II Theory Figure 1: System schematic diagrams. (a) Circuit Diagram. The memory mode (purple) and readout mode (yellow) are capacitively coupled to the transmon (green). The readout mode is also coupled to a transmission line which acts as a thermal bath. (b) Energy level diagram of the qubit-cavity system, for either the memory (purple) or readout (yellow) mode. The energy is presented in the lab frame. Bidirectional lines represent the cooling sideband drives, while decaying lines represent spontaneous decay in the cavity. (c) Frequency response of the different components. Dashed lines represent drives, wherein \epsilon_{m} and \epsilon_{r} are cavity drives and \epsilon_{R} is the Rabi drive. The initialization scheme we propose is presented in Fig. 1 . It is an expansion on the qubit sideband cooling method of Ref. Murch et al. 2012 (see Appendix A ), wherein we consider a memory mode and a readout mode that are dispersively coupled to a Rabi driven transmon. We treat the transmon as a qubit, assuming that the Rabi frequency \Omega_{R} is much smaller than the transmon anharmonicity. The eigenstates of the qubit are thus the \ket{-} and \ket{+} states, with energy difference \Omega_{R} . We apply sideband drives to both modes, with a detuning that is equal to the Rabi frequency. We use a Rabi driven qubit instead of an undriven qubit because a standard qubit’s energy is of order of a few GHz, which would make the sideband drives significantly detuned from the cavities’ frequencies. The density of states of the cavities at detunings of a few GHz are negligible (unlike for a Rabi driven qubit, as in Fig. 1 (c)) which would make the following process extremely inefficient (as shown in Ref. Murch et al. 2012 ). Thus, the use of a Rabi driven qubit is necessary. In a frame rotating with the two sideband drives and the Rabi drive, the Hamiltonian is \begin{split}H=-\Omega_{R}a_{r}^{\dagger}a_{r}-\Omega_{R}a_{m}^{\dagger}a_{m}-\frac{\Delta_{q}+\chi_{r}+\chi_{m}}{2}\sigma_{z}\\ -\frac{\Omega_{R}}{2}\sigma_{x}-\chi_{r}a_{r}^{\dagger}a_{r}\sigma_{z}-\chi_{m}a_{m}^{\dagger}a_{m}\sigma_{z}\\ +\epsilon_{r}(a_{r}^{\dagger}+a_{r})+\epsilon_{m}(a_{m}^{\dagger}+a_{m}),\end{split} (1) where \Delta_{q} is the detuning of the Rabi drive, a_{m,r} are field annihilation operators, \chi_{m,r} are dispersive coupling strengths with the transmon, and \epsilon_{m,r} are the complex drive amplitudes. The r and m subscripts refer to the readout and memory modes, respectively. Under constant drives, the cavities’ steady states are coherent states with amplitudes \bar{a}_{m} and \bar{a}_{r} . Calculating these amplitudes in the absence of a qubit we get \bar{a}_{m}=\frac{\epsilon_{m}}{\Omega_{R}}~,~\bar{a}_{r}=\frac{\epsilon_{r}}{\Omega_{R}+\frac{i\kappa}{2}}, (2) where \kappa is the decay rate of the readout mode and we assume that the memory mode natural decay rate is negligible. We require \kappa to be smaller than \Omega_{R}

Read the complete text