Tracking the creation of single photon emitters in AlN by implantation and annealing

H. B. Yağcı, E. Nieto Hernandez, J. K. Cannon, S. G. Bishop, E. Corte, J. P. Hadden, P. Olivero, J. Forneris, A. J. Bennett · 2025

Read Tracking the creation of single photon emitters in AlN by implantation and annealing by H. B. Yağcı, E. Nieto Hernandez, J. K. Cannon, S. G. Bishop, E. Corte, J. P. Hadden, P. Olivero, J. Forneris, A. J. Bennett (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-12546.txt.

Introduction

Yağcı and a large team (2025) tracked the creation of single-photon emitters in aluminum nitride, a material of interest for quantum devices. Such emitters can be made by firing aluminum ions into the crystal and then heating it, but the roles of each step were unclear. The team used a patterned sample so they could return to the exact same spots. They imaged the implanted regions before and after implantation and again after heating. An unimplanted region served as a control.

Heating alone created no new emitters in the control region. In the implanted regions, point-like emitters appeared only after the heating step. The new emitters showed the photon antibunching expected of true single-photon sources, and their spectra matched emitters previously found in as-grown material. The work pins down implantation plus annealing as the recipe, and gives a way to watch individual quantum emitters being born.

Catalog record

CREATORH. B. Yağcı, E. Nieto Hernandez, J. K. Cannon, S. G. Bishop, E. Corte, J. P. Hadden, P. Olivero, J. Forneris, A. J. Bennett
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-12546

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tracking the creation of single photon emitters in AlN by implantation and annealing H. B. Yağcı, E. Nieto Hernandez, J. K. Cannon, S. G. Bishop, E. Corte, J. P. Hadden, P. Olivero, J. Forneris, A. J. Bennett Abstract In this study, we inspect and analyze the effect of Al implantation into AlN by conducting confocal microscopy on the ion implanted regions, before and after implantation, followed by an annealing step. The independent effect of annealing is studied in an unimplanted control region, which showed that annealing alone does not produce new emitters. We observed that point-like emitters are created in the implanted regions after annealing by tracking individual locations in a lithographically patterned sample. The newly created quantum emitters show anti-bunching under ambient conditions and are spectrally similar to the previously discovered emitters in as-grown AlN. Originally submitted to Optical Materials on 23 June 2024, accepted on 11 August 2024. 1 Introduction Quantum technologies including quantum sensing, communications and computing have emerged as a potentially paradigm-changing sector, attracting strong scientific interest and substantial investments [ 1 ] . The major reason for this interest is the quantum advantage over classical information processing paradigms for specific and demanding computational problems. The advantage relies heavily on finding platforms hosting qubits that can be reliably prepared, manipulated and measured [ 2 ] . One such platform is colour centres in wide-bandgap semiconductors. An extensively investigated system is the negatively charged nitrogen-vacancy centre in diamond (NV - ) [ 3 ] , which hosts an electron spin which can be manipulated using microwave fields and read out optically [ 4 ] , even at room temperature. Other colour centres in semiconductors are being investigated for narrow transitions, high brightness, longer coherence lifetimes or ease of photonics integration; notable examples are SiV [ 5 ] and SnV [ 6 ] in diamond, divacancy centre [ 7 ] and V {}_{\text{Si}} [ 8 ] in silicon carbide (SiC), T- [ 9 ] and G- [ 10 ] centre in silicon and carbon-related defects [ 11 ] in hexagonal boron nitride (hBN). Recently, quantum emitters have also been detected in III-nitrides, such as AlN [ 12 ] and GaN [ 13 ] . Owing to the unique qualities of III-nitrides such as tunable bandgap and piezoelectricity, these emitters are promising candidates for electronically- or mechanically-modulated single photon sources in ambient conditions. AlN is hypothesised to host defect complexes that can be useful as potential qubits due to its large bandgap ( 6.02\text{\,}\mathrm{e}\mathrm{V} ). Varley et al. previously conducted an ab initio study on the vacancy complexes with group IVA and IVB elements, and reported that Ti-, Zr-vacancy centres can be hosted within the bandgap, with the ground state sufficiently apart from the valence band of AlN [ 14 ] . Previously conducted experiments in Ti-implanted AlN found an electron spin resonance signal in implanted samples but could not confirm optical activity [ 15 ] . Aghdaei et al . reported formation of broad peaks in Zr-implanted AlN [ 16 ] , but in a comprehensive study Senichev et al . found that emission in Zr-implanted AlN is statistically not different than Kr-implanted AlN with similar ion damage [ 17 ] . In line with our previous observations in Al-implanted AlN [ 18 ] , these results point to a native origin for the created single-photon emitters (SPE). While these studies demonstrated SPE creation by statistically comparing different samples, the creation event of a single distinct emitter was not microscopically assessed. In this study, we rigorously inspect and analyse the effect of Al implantation into AlN by conducting confocal microscopy on the ion implanted regions, before and after implantation, followed by an annealing step. The independent effect of annealing is studied in an unimplanted control region, which showed that annealing alone does not produce new emitters. Through tracking individual locations in a lithographically patterned sample, we observe that point-like emitters are created in the implanted regions after annealing. The newly created quantum emitters show anti-bunching under ambient conditions and are spectrally similar to the previously discovered emitters in as-grown AlN. 2 Materials and methods The studied samples consist of single crystal (0001) 1\text{\,}\mathrm{\SIUnitSymbolMicro m} MOCVD-grown AlN epilayer on 480\text{\,}\mathrm{\SIUnitSymbolMicro m} thick sapphire substrate, acquired from DOWA Electronics. SIMS measurements conducted by the manufacturer showed the main chemical impurities were H, C, O and Si, as is usual for samples grown by MOCVD. The epilayer in its as-grown form hosts single-photon emitters reported in our previous studies [ 12 ] . 2.1 Confocal microscopy The sample was inspected through confocal microscopy with a dry objective with NA=0.9 under CW 520\text{\,}\mathrm{nm} excitation. The emission was filtered through a 550\text{\,}\mathrm{nm} long pass filter to suppress the laser line, and a 650\text{\,}\mathrm{nm} short pass filter to remove undesired background fluorescence from the sapphire substrate between 690- 750\text{\,}\mathrm{nm} from the Cr +3 impurity. The confocal microscopy scans were conducted with below-saturation excitation power ( 215\text{\,}\mathrm{\SIUnitSymbolMicro W} at the back of the objective, compared to a typical saturation power of 606\text{\,}\mathrm{\SIUnitSymbolMicro W} ) to increase emitter-to-background contrast. The collected emission was guided to a fibre-coupled Excelitas silicon avalanche photodiode for photon counting measurements. As the excitation laser has a well-defined polarisation, the emitters whose absorption dipoles align with the excitation polarisation were detected preferentially against the emitters that did not. To counter this inherent bias, we conducted the confocal scans under linear polarisations of 0 ∘ , 60 ∘ and 120 ∘ in the plane of the sample to maximise the probability of detecting changes in the scan maps as described in Cannon et al. [ 19 ] . The individual intensity maps were then spatially aligned each other and the individual pixels were quadrature summed across three different polarisations in MATLAB. We note that the brightness of different emitters are not uniform. To show clearly the presence of less intense emitters in the scan maps presented in the manuscript, we have consistently rescaled the colour bar to the range between 1% and 25% of the raw image range. This means the brighter emitters are above the top end of the scale, and single pixel noise in the regions between emitters is less visible. For the Hanbury-Brown and Twiss (HBT) intensity interferometry, the filtered emission was split between two APDs using a multimode fibre beamsplitter. For each emitter, power dependent data was recorded to determine the best signal-to-noise ratio. Coincidence events from APD back-flash reflections were masked when fitting to the correlation functions. For the spectral measurements, the emission was coupled to an Andor Kymera 328i spectrometer with a grating of 150 l/mm and a silicon CCD camera through a polarisation-maintaining fibre. The emission spectrum was captured under maximum excitation power ( 3.7\text{\,}\mathrm{mW} ) and laser polarisation aligned to the absorption dipole angle of the individual emitters. 2.2 Sample preparation The as-grown epilayer of AlN contains a random distribution of point-like emitters which were mapped before implantation to track the creation of new colour centres. The epilayer was patterned using photolithography, a hardmask and a Cl 2 /BCl 3 dry etch. The hardmask was then removed and the sample cleaned in solvents. The sample was subjected to a 100\text{\,}\mathrm{W} 40\text{\,}\mathrm{sccm} O 2 ashing step

Read the complete text