Tunable coherence laser interferometry: demonstrating 40dB of straylight suppression and compatibility with resonant optical cavities
Daniel Voigt, Leonie Eggers, Katharina-Sophie Isleif, Sina M. Koehlenbeck, Melanie Ast, Oliver Gerberding · 2025
Read Tunable coherence laser interferometry: demonstrating 40dB of straylight suppression and compatibility with resonant optical cavities by Daniel Voigt, Leonie Eggers, Katharina-Sophie Isleif, Sina M. Koehlenbeck, Melanie Ast, Oliver Gerberding (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-11528.txt.
Introduction
Daniel Voigt and co-authors wrote a 2025 paper on taming stray light in laser interferometers, the tools that catch gravitational waves. Ghost beams and scattered light inject noise, worst at low frequencies. Their fix tunes the laser's coherence with a coded phase pattern, so stray paths lose their grip while the true path stays sharp.
In a bench interferometer they cut stray light noise by a large factor, with the faked coherence length under a foot. Suppression depends on path delay gap and code length, which they map. They also show a resonant cavity still works under the coding when its round trip matches the code repeat. The method suits future detectors.
Catalog record
| CREATOR | Daniel Voigt, Leonie Eggers, Katharina-Sophie Isleif, Sina M. Koehlenbeck, Melanie Ast, Oliver Gerberding |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-11528
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tunable coherence laser interferometry: demonstrating 40dB of straylight suppression and compatibility with resonant optical cavities Daniel Voigt, Leonie Eggers, Katharina-Sophie Isleif, Sina M. Koehlenbeck, Melanie Ast, Oliver Gerberding Abstract A major limitation of laser interferometers using continuous wave lasers are parasitic light fields, such as ghost beams, scattered or stray light, which can cause non-linear noise. This is especially relevant for laser interferometric ground-based gravitational wave detectors. Increasing their sensitivity, particularly at frequencies below 10 Hz, is threatened by the influence of parasitic photons. These can up-convert low-frequency disturbances into phase and amplitude noise inside the relevant measurement band. By artificially tuning the coherence of the lasers, using pseudo-random-noise (PRN) phase modulations, this influence of parasitic fields can be suppressed. As it relies on these fields traveling different paths, it does not sacrifice the coherence for the intentional interference. We demonstrate the feasibility of this technique experimentally, achieving noise suppression levels of 40 dB in a Michelson interferometer with an artificial coherence length below 30 cm. We probe how the suppression depends on the delay mismatch and length of the PRN sequence. We also prove that optical resonators can be operated in the presence of PRN modulation by measuring the behavior of a linear cavity with and without such a modulation. By matching the resonators round-trip length and the PRN sequence repetition length, the classic response is recovered. I Introduction Laser interferometers are widely used metrological tools in fundamental research, various measurement instruments and industry applications. Interferometers that use continuous wave lasers with high stability profit from the associated strong spatial coherence to generate interference patterns in various scenarios. This includes interferometers with very long arms or high Finesse optical resonators where thousands of round-trip fields are interfered to achieve, for example, power enhancement. A prime example using both these techniques are laser interferometric, ground-based gravitational wave detectors. These kilometer-long interferometers measure relative arm-length strain with an integrated sensitivity around 10^{-20} at frequencies between 10 Hz and 10 kHz to detect fluctuations of space-time itself. The current network of observatories [ 1 ] consisting of the Advanced LIGO, Advanced VIRGO [ 2 ] , KAGRA [ 3 ] and GEO600 [ 4 ] detectors steadily increases the rate of detected events through ongoing improvements and updates of the interferometers. Even further increases in sensitivity will be realized in the next generation of observatories like the Einstein Telescope (ET) [ 5 ] and Cosmic Explorer (CE) [ 6 , 7 ] , where the former specifically aims to extend the sensitivity down to 3 Hz. However, these large interferometers, along with smaller ones used, for example, for rotation measurements [ 8 , 9 , 10 ] , not only profit from the large laser coherence. Any photons sent into the interferometers that are not following the nominal beam trajectory but still couple back into the sensitive path can lead to measurement disturbances. These parasitic interferences are a well-known and often critical challenge in precision laser interferometry. In ground-based gravitational wave detectors, reducing the influence of these unwanted light fields, often called ghost beams, straylight or scattered light, belongs to the larger efforts of mitigating noise sources that limit the sensitivity of the observatories [ 11 ] . Currently, there are several techniques employed to mitigate the impact of scattered light, many of which are also standard in other precision interferometers, including baffles [ 12 ] , beam dumps and reducing scattering sources and their relative motion driven by e.g. seismic or acoustic motion [ 13 , 14 ] . In other studies the scattered light is phase modulated after leaving the main beam, changing its dynamics directly [ 15 , 16 , 17 ] to reduce the coupling into the measurement band. Subtraction of scattered light effects has also been studied in different schemes, using existing auxiliary photodetector signals [ 18 , 19 ] or the readout of additional light quadratures at the nominal output [ 20 ] . However, for the sensitivity increase aimed for in future observatories, even single photons scattered back into the readout will be troublesome [ 21 , 22 , 23 ] . Thus, the suppression of parasitic fields is a permanent and major effort in precision interferometers and has a major impact on their complexity in both design and implementation. This motivates our study of a new, fundamental solution to the suppression of parasitic light fields in laser interferometers, specifically for future ground-based gravitational wave detectors and, generally, for all interferometers limited by such effects. The concept we call tunable coherence aims to carefully control and break the coherence of laser light. The coherence and therefore interference are reduced to a minimal value for all unintended optical paths while maintaining it for the intended path. This effectively creates a pseudo-white-light interferometer which is inherently insensitive to parasitic light fields having a relative delay to the intended path. We achieve this with \mathrm{GHz} -phase-modulation following a pseudo-random-noise (PRN) binary sequence applied to the laser light [ 24 ] . The sequence, consisting of deterministically but seemingly randomly generated chips of logical zeros and ones, flips the light phase by 180\text{\,}\mathrm{\SIUnitSymbolDegree} . This concept was already briefly considered in the context of gravitational wave interferometers [ 25 ] , but deemed unfeasible, mostly due to technical limitations in available components. However, advances in e.g. electro-optical components and successes with multiplexed readout in digitally enhanced interferometry [ 26 , 27 ] have changed that. It now seems feasible and relevant to investigate the application of tunable coherence to the main science laser of gravitational wave detectors and other precise laser interferometers. With using tunable coherence, two new length scales are introduced which are also sketched in the top part of Figure 1 : The remaining coherence length set by the length of the chips, d_{\text{chip}} , that form the binary modulation sequence. This optical length given by the inverse of the PRN-modulations frequency, f_{\text{PRN}} , and the speed of light, c , is a measure for the minimum needed relative delay to suppress interference. The width of remaining coherence is thus double d_{\text{chip}} . And the length until the coherence is restored after delaying one beam by a whole PRN-sequence. This so-called recoherence length , d_{\text{coh}} , is determined by the integer length of the sequence, typically called the number of chips, n_{\text{chips}} , and their length. Coherence is restored for all integer multiples of this length. Both lengths can be written as d_{\text{chip}}=\frac{c}{f_{\text{PRN}}}\qquad\text{and}\qquad d_{\text{coh}}=n_{\text{chips}}\cdot d_{\text{chip}}. (1) Figure 1: The properties of tunable coherence and the PRN modulation are sketched in the top figure. The sketch below depicts the experimental setup with the fiber-coupled electro-optic modulator (EOM) modulating the PRN-sequence onto the laser at f_{\text{PRN}} and the Michelson interferometer locked at mid-fringe. The north-arm was used to actuate the phase between the two arms and locking the interferometer, in the east-arm some light was reflected out of the arm and coupled back after being reflected from another actuated mirror to simulate scattered light coupling. This scattered light picked up an additional delay \tau_{\text{sc}} relative to the equal arm-delays \tau_{\text{north}} and \tau_{\text{east}} . In our scheme the demodulation is done optically by interfering the modulated light beams with a