Hydrodynamic Flow Field and Frictional Resistance Coefficient of a Disk Rotating Steadily in a Compressible Fluid Layer With Odd Viscosity on a Rigid Substrate

Abdallah Daddi-Moussa-Ider, Yuto Hosaka, Elsen Tjhung, Andrej Vilfan · 2025

Read Hydrodynamic Flow Field and Frictional Resistance Coefficient of a Disk Rotating Steadily in a Compressible Fluid Layer With Odd Viscosity on a Rigid Substrate by Abdallah Daddi-Moussa-Ider, Yuto Hosaka, Elsen Tjhung, Andrej Vilfan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-11510.txt.

Introduction

Abdallah Daddi-Moussa-Ider and co-authors study a spinning disk in a thin fluid layer in a 2025 paper. The fluid has odd viscosity, a trait absent in normal fluids. The disk sits on a rigid base and turns at a steady rate. The fluid can be compressed, which adds to the puzzle.

Odd viscosity creates a radial flow that points inward or outward by its sign. That flow should shape how two spinning disks pull or push each other. The team map the full flow field around the disk. They also compute drag on the spin and find odd viscosity raises it for either sign. The work guides study of exotic fluids.

Catalog record

CREATORAbdallah Daddi-Moussa-Ider, Yuto Hosaka, Elsen Tjhung, Andrej Vilfan
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-11510

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hydrodynamic Flow Field and Frictional Resistance Coefficient of a Disk Rotating Steadily in a Compressible Fluid Layer With Odd Viscosity on a Rigid Substrate Abdallah Daddi-Moussa-Ider, Yuto Hosaka, Elsen Tjhung, Andrej Vilfan Abstract We analyze the hydrodynamics of a rotating disk in a two-dimensional compressible fluid layer with odd viscosity. Unlike conventional fluids, odd viscosity introduces a radial flow component that can be directed either inward or outward, depending on its sign. This phenomenon is expected to significantly impact the hydrodynamic interactions between two rotating disks, potentially causing effective attraction or repulsion depending on the sign of the odd viscosity and the direction of rotation. Furthermore, we calculate the rotational resistance coefficient and find that odd viscosity increases this coefficient, regardless of its sign. I Introduction Chiral active fluids are systems composed of remarkable constituents that violate both parity and time-reversal symmetries. They appear in a variety of active matter systems, where active rotational motion takes place through continuous injection of energy [ 1 ] . Examples span a wide range of scales, from aggregates of membrane-embedded rotors [ 2 ] , swimming algae [ 3 ] and marine embryos [ 4 ] to bacteria in circular motion [ 5 ] . Even at more macroscopic scales, such chiral systems can be formed by self-spinning rotors [ 6 ] or colloidal particles [ 7 , 8 ] . In classical fluids where symmetries are conserved, transport phenomena in a variety of physical systems follow a strong principle known as the Onsager reciprocal relations [ 9 ] . These relations impose symmetry on the transport coefficients that connect thermodynamic forces and flows. In fluid dynamics, they are related to the Lorentz reciprocal theorem [ 10 ] that imposes a symmetric form of the resistance tensor of immersed objects [ 11 ] . Fluids with broken symmetries, however, can have unusual anti-symmetric components in the transport coefficients that are called odd viscosity [ 12 , 13 , 14 , 15 , 16 ] . Odd viscosity is dissipationless, but it can affect the dissipation in the fluid through its influence on the flow [ 17 , 18 , 19 ] . To date, odd viscosity has been observed exclusively in 2D fluids of spinning particles, such as metallic colloids and colloidal rods in an external magnetic field [ 7 , 20 ] . The mechanisms that lead to odd viscosity have been studied in numerical or computational studies of chiral active fluids [ 21 , 22 , 23 , 24 , 25 ] . The concept of odd viscosity has also been extended to other analogous notions such as systems with odd diffusivity and odd elasticity [ 26 , 27 , 28 , 15 ] . Although experimental protocols have been developed to measure odd viscosity using excess boundary stresses [ 7 ] , weak compressibility [ 20 ] , and the area change of a bubble [ 29 ] or even directly measuring the stress tensor of the fluid [ 21 , 22 , 30 ] , simple protocols, e.g., using a single probe particle, are scarce. Therefore, methods to characterize chirality in odd fluids are not yet fully developed. One of the potential approaches is to analyze the response of probes, a method referred to as microrheology [ 31 ] . In classical fluids, this method determines the transport properties of various types of soft media, such as monolayers of soluble surfactants [ 32 ] , compressible fluids [ 33 ] , and viscoelastic environments [ 34 ] . Especially in compressible fluids with odd viscosity, rotational motion of particles has been less studied, as compared to translational motion [ 35 , 36 ] . Here, we study the hydrodynamics of a compressible fluid layer with odd viscosity surrounding a rotating disk. We solve the problem analytically and determine the flow field around the disk. Notably, the flow field contains a radial component, in addition to well-known azimuthal part, in stark contrast to the swirling flow in classical fluids. Using this analytic solution, we also compute the rotational friction. This result offers a straightforward experimental setup for detecting odd viscosity, a key characteristic of chiral active fluids. II 2D Odd hydrodynamics We consider a 2D compressible thin layer supported by an underlying incompressible 3D fluid; see Fig. 1 for an illustration of the system setup. The 2D fluid layer is characterized by three viscosity coefficients, namely, dilatational \eta_{\rm D} , shear \eta_{\rm S} , and odd viscosity \eta_{\rm O} , while the 3D bulk fluid possesses only a 3D shear viscosity \eta_{\rm B} . We assume that these viscosities are constant. Let \bm{f}_{\rm B} denote the force density exerted on the 2D layer by the 3D fluid beneath it. Additionally, let \bm{f} represent any other traction force acting on the 2D layer. The equation governing the in-plane fluid velocity \bm{v}(x,y) on the thin layer is then given by the 2D compressible Stokes equation as \displaystyle\bm{\nabla}\cdot\bm{\sigma}+\bm{f}_{\rm B}+\bm{f}=\mathbf{0}\,. (1) Here, \bm{\nabla}=(\partial_{x},\partial_{y}) represents the 2D differential operator, and \bm{\sigma} denotes the 2D viscous stress tensor \displaystyle\sigma_{ij}=\eta_{ijk\ell}E_{k\ell}\,, (2) where E_{ij}=\left(\partial_{i}v_{j}+\partial_{j}v_{i}\right)/2 is the strain rate tensor and \eta_{ijkl} is the viscosity tensor, which, in the case of a 2D compressible system [ 37 ] , can be represented as \displaystyle\eta_{ijk\ell} \displaystyle=\left(\eta_{\rm D}-\eta_{\rm S}\right)\delta_{ij}\delta_{k\ell}+\eta_{\rm S}(\delta_{ik}\delta_{j\ell}+\delta_{i\ell}\delta_{jk}) \displaystyle\quad+\frac{1}{2}\,\eta_{\rm O}(\epsilon_{ik}\delta_{j\ell}+\epsilon_{j\ell}\delta_{ik}+\epsilon_{i\ell}\delta_{jk}+\epsilon_{jk}\delta_{i\ell})\,. (3) Here, \delta_{ij} denotes the Kronecker delta and \epsilon_{ij} stands for the 2D Levi-Civita tensor, which is antisymmetric with respect to i\leftrightarrow j , such that \epsilon_{xx}=\epsilon_{yy}=0 and \epsilon_{xy}=-\epsilon_{yx}=1 . As shown in Eq. ( 3 ), the odd viscosity term proportional to \eta_{\rm O} breaks the symmetry under the exchange ij\leftrightarrow k\ell . In general, additional odd viscosity and regular viscosity terms may appear in Eq. ( 3 ), coupling the stress tensor to the vorticity tensor [ 37 , 15 , 38 ] . However, for simplicity, we assume that the dynamics of angular momentum are decoupled from linear momentum, so that the anti-symmetric stress can be neglected [ 38 ] . Figure 1: (Color online) Schematic of a disk with radius a , rotating at a constant angular velocity \Omega , immersed in a thin fluid layer characterized by two dissipative viscosities (dilatational viscosity \eta_{\rm D} and shear viscosity \eta_{\rm S} ) and a non-dissipative odd viscosity \eta_{\rm O} . The 3D bulk fluid, which supports the overlying fluid layer from below, has only shear viscosity \eta_{\rm B} , with the subphase thickness denoted by h . In actual calculations, we use the lubrication approximation for the subphase and the thickness h is much smaller than any in-plane length scales in the system, which imposes the condition a\gg h . Therefore, the comparable size of a disk and the thickness in the schematic is for presentation purposes only. The velocity of the 3D bulk fluid, \bm{u}(x,y,z) , satisfies the 3D incompressible Stokes equation with the no-slip boundary condition \bm{u}(x,y,0)=0 at z=0 and the continuity condition \bm{u}(x,y,h)=\bm{v}(x,y) at z=h (see Fig. 1 ). By applying the lubrication approximation for the bulk fluid [ 33 , 39 , 40 ] , the coupled 2D compressible equation ( 1 ) and 3D incompressible Stokes equations with the boundary conditions at z=0 and z=h can be solved. This brings us

Read the complete text