Superheterodyne Rydberg S-band receiver with a multi-tone local oscillator based on an atomic transition loop Journal: opticajournal Publication type: Research Article
Jan Nowosielski, 1,2 Mateusz Mazelanik, 1 Wojciech Wasilewski, 1,2 and Michał Parniak 1,2,* · 2025
Read Superheterodyne Rydberg S-band receiver with a multi-tone local oscillator based on an atomic transition loop Journal: opticajournal Publication type: Research Article by Jan Nowosielski, 1,2 Mateusz Mazelanik, 1 Wojciech Wasilewski, 1,2 and Michał Parniak 1,2,* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-11418.txt.
Introduction
Jan Nowosielski and three co-authors build a radio receiver from atoms in twenty twenty-five. Rydberg atom sensors can detect radio signals with extreme sensitivity. The best mode, superheterodyne reception, needs a local oscillator inside the vapor cell. That oscillator undercuts stealthy, all-optical operation.
Their scheme avoids a same-frequency local oscillator by mixing multiple tones. An atomic transition loop does the mixing inside the atoms themselves. The receiver works at S-band frequencies, the range used by Wi-Fi networks. It operates without interfering with the signal it senses. Efficient theory predicts the sensor's performance. Readers in quantum sensing get a practical detector that keeps the advantages of atomic receivers while dropping a key drawback.
Catalog record
| CREATOR | Jan Nowosielski, 1,2 Mateusz Mazelanik, 1 Wojciech Wasilewski, 1,2 and Michał Parniak 1,2,* |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-11418
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Superheterodyne Rydberg S-band receiver with a multi-tone local oscillator based on an atomic transition loop Journal: opticajournal Publication type: Research Article Jan Nowosielski, 1,2 Mateusz Mazelanik, 1 Wojciech Wasilewski, 1,2 and Michał Parniak 1,2,* Abstract Atomic-vapor sensors based on Rydberg atoms now face a transition towards practical applications, with several outstanding challenges. To achieve the best sensitivities, a superheterodyne mode of operation is desired, which requires the presence of a local oscillator in the vapor cell. This local oscillator hinders several advantages of the sensor, such as stealthy and all-optical operation. We propose and realize a detection scheme, which avoids some of those problems by using multi-tone mixing, where direct usage of the local oscillator at the same frequency is not required. Our scheme is further elaborated on using efficient theoretical methods to predict the performance of the sensor. Our sensor operates at the S-band frequency, known for its usage in IEEE 802.11 (Wi-Fi) networks, without interfering with the signal itself. 1 Introduction Rydberg atom-based electromagnetic (EM) radiation sensors are a promising technology already holding a solid position in the scientific community. The technology utilises large transition dipole moments between Rydberg states to achieve EM field sensitivity on par with specialized electronics [ 1 , 2 ] . Yet, it still allows for high detection bandwidth [ 3 , 4 ] and offers advantages such as extraordinary tunability and, importantly, self calibration feature based on fundamental constants. These naturally arose features combined with the possibility of relatively low complexity of the sensors and the possibility of miniaturization and packaging [ 5 , 6 , 7 ] drove the attention of the engineering community that joined the effort of maturing the technology. As technology matures, new scientific and practical applications are born. The established detection schemes allow measuring the RF EM field amplitude [ 8 , 9 ] , detecting frequency and amplitude modulation [ 10 , 11 ] , phase-sensitive measurement [ 12 , 13 , 14 ] and photon counting via RF-to-optical conversion [ 15 , 16 , 17 ] . Moreover, the properties of Rydberg atoms allow for measurement of different properties of oncoming EM field such as angle of arrival [ 18 ] , and polarization [ 19 , 20 ] . Apart from applications in electrometry, in recent years, multiple groups have presented communication schemes employing phase-sensitive Rydberg-based receivers [ 21 , 22 ] . The first sensors to be field-deployed are most likely the simplest ones. The lowest complexity, amplitude sensor based on Autler-Townes (AT) effect spectroscopy, while having limited sensitivity enables self-referencing by linking the measured amplitude with the Rabi frequency and thus dipole moment. However, in many applications higher sensitivity and phase-resolving detection are desired. This is offered by the superheterodyne sensor that employs an additional field acting as a local oscillator which as in the case of standard phase-sensitive detection of the electronic signal needs to be close in frequency and stronger than the signal itself. Thus, the additional field can disturb the source of the measured field and is often generally undesired. Interestingly enough, phase-sensitive detection can be achieved without employing a local oscillator utilizing the loop energy schemes. The phase-sensitivity of such setups has been described theoretically [ 23 , 24 , 25 ] , and in recent years, multiple groups have utilized it to perform the phase-sensitive detection in case of all-optical [ 26 ] and microwave-optical [ 27 , 26 , 28 ] schemes. An interesting case arises when considering a fully microwave loop, which up to this moment was proposed only theoretically [ 29 ] , as a phase between generated microwave fields can be easily controlled electronically. In this paper, we propose an experimental implementation of such setup consisting of three different microwave fields, and compare measured phase-dependent probe transmission spectra as fields to the numerical predictions. Additionally, we characterize our setup as a receiver, finding its sensitivity and response range. 2 Experimental setup 2.1 Energy level scheme In the experiment, we consider a 6-level energy ladder of {}^{85}\mathrm{Rb} depicted in the Fig 1 a. In the following setup, the probe laser is tuned to the \mathrm{D}_{2} transition between ground state 5^{2}\mathrm{S}_{1/2}(F=3) and 5^{2}\mathrm{P}_{3/2}(F=4) . The second 776\text{\,}\mathrm{nm} and third 1268\text{\,}\mathrm{n}\mathrm{m} fields coupled to the 5^{2}\mathrm{P}_{3/2}(F=4)\rightarrow 5^{2}\mathrm{D}_{5/2}(F=5) and 5^{2}\mathrm{D}_{5/2}(F=5)\rightarrow 32^{2}\mathrm{F}_{7/2} transitions respectively excite atoms to the Rydberg state. The overlapping electromagnetically induced transparency effects (EIT) [ 30 ] caused by both fields lead to the emergence of the so-called electromagnetically induced absorption effect (EIA) [ 31 ] . Next field, coupled to the 32^{2}\mathrm{F}_{7/2}\rightarrow 32^{2}\mathrm{G}_{9/2} transition with the frequency, we call the signal ( \mathsf{SIG} ) microwave ( \mathsf{MW} ) field with the frequency f_{\mathsf{SIG}}\approx$2.5\text{\,}\mathrm{GHz}$ . To perform the phase-sensitive measurement of the \mathsf{SIG} field we utilize the all-microwave loop interferometry scheme with two additional \mathsf{MW} fields. The dressing ( \mathsf{DRS} ) field with the frequency f_{\mathsf{DRS}}\approx$500\text{\,}\mathrm{MHz}$ excites atoms through the 32^{2}\mathrm{G}_{9/2}\rightarrow 32^{2}\mathrm{H}_{11/2} transition and the loop is then closed by the coupling ( \mathsf{CPL} ) field at the frequency f_{\mathsf{CPL}}\approx$1.5\text{\,}\mathrm{GHz}$ , which drives atoms from the 32^{2}\mathrm{F}_{7/2} to the 32^{2}\mathrm{H}_{11/2} via the two-photon transition. It was shown in other works that in the case of the resonance of all the fields in the loop, i.e. f_{\mathsf{SIG}}+f_{\mathsf{DRS}}-2f_{\mathsf{CPL}}=0 the probe transmission through the atomic medium depends solely on the phase between fields. In the non-resonant case, that is if one of the fields is detuned from the loop resonance, the phase between fields becomes time-dependent and is equal \varphi=2\pi\cdot f_{\mathsf{OPT}}t , where t is time and f_{\mathsf{OPT}}=f_{\mathsf{SIG}}+f_{\mathsf{DRS}}-2f_{\mathsf{CPL}} is the frequency mismatch, which can be interpreted as the frequency of the optical ( \mathsf{OPT} ) signal. Moreover, if the \mathsf{SIG} was phase-modulated, the modulation could be then recovered by measuring the transmission via the photodiode ( \mathsf{PD} ) and then demodulating measured \mathsf{PD} signal at the beat note frequency. 2.2 Experimental setup Our experimental setup is built around room-temperature ( 22.5\text{\,}\mathrm{\SIUnitSymbolCelsius} ) {}^{85}\mathrm{Rb} atoms, and its simplified scheme is depicted in Fig 1 b. To partially reduce the thermal (Doppler) broadening the pair of 776 and 1268 nm beams and the probe beam counter-propagate in the cell. All beams are circularly polarized, with the probe beam being left-handed circularly polarized, and coupling beams being right-handed circularly polarized. All beams focused inside the cylindrical vapor cell with a length equal to 58 mm. The powers of lasers are chosen to maximize the EIA effect, which is achieved for probe laser power equal to P_{780}=$1.5\text{\,}\mathrm{\SIUnitSymbolMicro W}$ , and powers of 776 and 1268 nm lasers equal to P_{776}=$2.4\text{\,}\mathrm{mW}$ and P_{1268}=$85\text{\,}\mathrm{mW}$ and all laser beam waists equal to w=$300\text{\,}\mathrm{\SIUnitSymbolMicro m}$ . All lasers are frequency-stabilized to the master laser via the cavity setups. The \mathsf{MW} signals are generated using the LMX2595EVM frequency synthesizers. The \mathsf{SIG} field is generated by sending a signal at the frequency f_{\mathsf{SIG}}=$2514\text{\,}\mathrm{MHz}$ via the controllable attenuator to the commercially available Wi-Fi antenna. The \mathsf{CPL} and \mathsf{DRS} fields are generated by two additional frequency synthesizers at the frequencies f_{\mathsf{DRS}}=$510.4\text{\,}\mathrm{MHz}$ and f_{\mathsf{CPL}}=$1512.2\text{\,}\mathrm{MHz}$ . The signals are then combined via the frequency splitter and sent to the capacitor-like antenna mounted around the rubidium cell. The frequencies of the \mathsf{MW} fields are chosen to optimize the atomic response. To have a