OpenLiDARMap: Zero-Drift Point Cloud Mapping using Map Priors
Dominik Kulmer, Maximilian Leitenstern, Marcel Weinmann, Markus Lienkamp · 2025
Read OpenLiDARMap: Zero-Drift Point Cloud Mapping using Map Priors by Dominik Kulmer, Maximilian Leitenstern, Marcel Weinmann, Markus Lienkamp (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-11111.txt.
Introduction
Dominik Kulmer and co-authors build drift free city maps from lidar and public data in a 2025 paper. Robots that cannot use satellite positioning lean on laser scans, but scan only navigation drifts over long runs. Their method anchors scans to open map priors such as building outlines and surface models from sparse aerial surveys.
Matching each new scan both to the last one and to the growing map keeps local shape tight while the priors pin the map to real world coordinates. The result is a dense, georeferenced three dimensional point cloud with no long term drift and no satellite help at all. The authors present it as a base for autonomous systems working where positioning signals fail.
Catalog record
| CREATOR | Dominik Kulmer, Maximilian Leitenstern, Marcel Weinmann, Markus Lienkamp |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-11111
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
OpenLiDARMap: Zero-Drift Point Cloud Mapping using Map Priors Dominik Kulmer, Maximilian Leitenstern, Marcel Weinmann, Markus Lienkamp Abstract Accurate localization is a critical component of mobile autonomous systems, especially in Global Navigation Satellite Systems (GNSS)-denied environments where traditional methods fail. In such scenarios, environmental sensing is essential for reliable operation. However, approaches such as LiDAR odometry and Simultaneous Localization and Mapping (SLAM) suffer from drift over long distances, especially in the absence of loop closures. Map-based localization offers a robust alternative, but the challenge lies in creating and georeferencing maps without GNSS support. To address this issue, we propose a method for creating georeferenced maps without GNSS by using publicly available data, such as building footprints and surface models derived from sparse aerial scans. Our approach integrates these data with onboard LiDAR scans to produce dense, accurate, georeferenced 3D point cloud maps. By combining an Iterative Closest Point (ICP) scan-to-scan and scan-to-map matching strategy, we achieve high local consistency without suffering from long-term drift. Thus, we eliminate the reliance on GNSS for the creation of georeferenced maps. The results demonstrate that LiDAR-only mapping can produce accurate georeferenced point cloud maps when augmented with existing map priors. I INTRODUCTION Localization is essential for mobile autonomous systems, enabling them to navigate and interact with their environment effectively. In recent years, significant advancements have been made in LiDAR odometry [ 1 , 2 ] , LiDAR-inertial odometry [ 3 , 4 , 5 ] , and Simultaneous Localization and Mapping (SLAM) [ 6 , 7 , 8 , 9 ] . Despite their advances, these methods remain prone to drift, especially during long-term operations. While loop closure can help reduce drift by aligning the current position with a previously visited location, it does not guarantee an accurate reconstruction of the intermediate path. Additionally, loops are not always present, especially in linear or open-ended trajectories. Fig. 1 : Representation of the different map priors and formats from the building approximations on the left to the final georeferenced point cloud map on the right for KITTI Seq. 00. Map-based localization offers an alternative by using pre-existing maps to constrain localization and eliminate drift. However, these algorithms rely on the availability of maps, which limits their applicability in unknown environments where LiDAR odometry, LiDAR-inertial odometry, and SLAM excel. OpenStreetMap 1 1 1 www.openstreetmap.org (OSM), a globally available web-based platform, provides maps that can be used for localization with minimal geographic constraints. However, these standard-definition (SD) maps cannot support high-precision localization due to their limited accuracy. High-definition (HD) maps represent the environment at a resolution of 10\text{\,}\mathrm{cm}20\text{\,}\mathrm{cm} [ 10 ] and are ideal for precise localization [ 11 , 12 ] . These maps typically consist of high accuracy point cloud maps. However, the map generation process suffers from the same drift and accuracy issues as the localization itself. Global Navigation Satellite Systems (GNSS) offer a global reference to mitigate drift and enable georeferenced mapping. However, their signals are highly susceptible to degradation in obstructed environments. This vulnerability significantly reduces their reliability for producing high-precision maps. This work addresses these challenges by proposing a method for high-definition map generation that combines publicly available building maps and surface models with onboard LiDAR data. By leveraging these resources, the approach eliminates reliance on GNSS and enables the creation of accurate, georeferenced point cloud maps ( Figure 1 ). The main contribution of this paper is a pose-graph-based optimization algorithm that combines Iterative Closest Point (ICP) scan-to-scan with scan-to-map matching of publicly available building data and sparse surface models to generate accurate georeferenced point cloud maps without the need for GNSS data. While scan-to-map matching regulates long-term drift, scan-to-scan matching maintains local consistency between individual LiDAR scans. It also enables the approach to compensate for missing buildings and outdated map data or to bridge short areas not present on the sparse prior map. Our approach uses neither learning-based methods, feature extraction techniques, nor loop closures. We show that the approach works with a single parameter set on different platforms, like vehicles and segways, with different LiDAR setups, ranging from a single 32-channel LiDAR to a modern multi-LiDAR setup, and in various environments, such as residential and rural regions. In sum, we make four claims: Our approach is able to (I) map long sequences without accumulating drift over time; (II) automatically georeference the generated map without GNSS data; (III) keep a high local consistency of the generated map; (IV) yield promising results on multiple robotic platforms, LiDAR setups and environments without further tuning. To build on our work, we provide an open source implementation upon acceptance of the paper. II RELATED WORK When available, high-precision RTK-GNSS signals are often used for georeferenced mapping, requiring precise time synchronization between sensors and optimal signal reception along the mapped route. However, GNSS signal interruptions, such as in urban canyons or underpasses, pose a challenge to continuous mapping. Hybrid pipelines have been proposed to deal with signal interruption. These typically involve creating an initial map using LiDAR odometry or SLAM, followed by post-processing to georeference the map using GNSS data [ 13 ] . While this approach can bridge short gaps without GNSS, it remains dependent on intermittent signal availability. SLAM techniques fused with GNSS signals can also produce georeferenced maps [ 11 , 14 , 15 ] , but require careful tuning of sensor weights and suffer from the same dependency on GNSS signal quality. OSM represents an alternative to GNSS for global localization and mapping, relying on widely available crowdsourced map data. [ 16 ] improved global localization accuracy by combining visual odometry with Monte Carlo localization, using chamfer matching to align trajectories with OSM maps. [ 17 ] proposed a probabilistic navigation method that aligns 3D-LiDAR sensor data with OSM tracks using semantic terrain information and a Markov-Chain Monte Carlo framework. [ 18 ] introduced a Gaussian-Gaussian cloud model for visual odometry, where OSM road constraints help mitigate drift and resolve scale ambiguities. [ 19 ] used OSM to create orthophoto-style images of roads and building footprints and generated semantic descriptors to match LiDAR data. [ 20 ] introduced a localization method that detects building facades using stereo image-based point clouds and matches them with 3D building models from OSM. Similarly, [ 21 ] computed angular distances to buildings within OSM and produced descriptors that match LiDAR data to achieve localization. [ 22 ] used a particle filter to integrate LiDAR point clouds with OSM constraints such as road boundaries, improving accuracy by exploiting map geometry. [ 23 ] extended this concept by combining SLAM with OSM priors, integrating 2D building geometry into trajectory estimation through LiDAR scan matching. These methods highlight the diverse applications of OSM in reducing drift for mapping and localization in the absence of GNSS signals. However, challenges such as limited accuracy and dependence on map accuracy remain. Satellite or aerial imagery is another alternative for georeferenced mapping by aligning ground-level observations with overhead map features. [ 24 ] presented a cross-view localization framework that leverages semantic LiDAR point clouds alongside top-down RGB satellite imagery for georeferenced mapping. Similarly, [ 25 ] refined cross-view localization techniques to operate effectively in areas lacking fine-grained ground truth, relying on coarse satellite