Selective Excitation of Superconducting Qubits with a Shared Control Line through Pulse Shaping

R. Matsuda, R. Ohira, T. Sumida, H. Shiomi, A. Machino, S. Morisaka, K. Koike, T. Miyoshi, Y. Kurimoto, Y. Sugita, Y. Ito, Y. Suzuki, P. A. Spring, S. Wang, S. Tamate, Y. Tabuchi, Y. Nakamura, K. Ogawa, M. Negoro · 2025

Read Selective Excitation of Superconducting Qubits with a Shared Control Line through Pulse Shaping by R. Matsuda, R. Ohira, T. Sumida, H. Shiomi, A. Machino, S. Morisaka, K. Koike, T. Miyoshi, Y. Kurimoto, Y. Sugita, Y. Ito, Y. Suzuki, P. A. Spring, S. Wang, S. Tamate, Y. Tabuchi, Y. Nakamura, K. Ogawa, M. Negoro (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-10710.txt.

Introduction

Ryo Matsuda and co-authors show how to address single quantum bits on a shared wire without waking their neighbors, in a 2025 paper. Wiring one line per qubit will not scale, so several qubits share a line by pitch. When pitches sit close, a pulse aimed at one can spill onto others.

Their shaped pulse carves null points at the neighbor pitches, silencing the spill. On three fixed-pitch transmon qubits, the shaped pulses matched standard pulses on gate quality for the target. Unwanted excitation of bystanders dropped sharply at the same time. Shared-line control, a key scaling trick for quantum hardware, gains a cleaner tool.

Catalog record

CREATORR. Matsuda, R. Ohira, T. Sumida, H. Shiomi, A. Machino, S. Morisaka, K. Koike, T. Miyoshi, Y. Kurimoto, Y. Sugita, Y. Ito, Y. Suzuki, P. A. Spring, S. Wang, S. Tamate, Y. Tabuchi, Y. Nakamura, K. Ogawa, M. Negoro
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-10710

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Selective Excitation of Superconducting Qubits with a Shared Control Line through Pulse Shaping Preprint: APS/123-QED R. Matsuda, R. Ohira, T. Sumida, H. Shiomi, A. Machino, S. Morisaka, K. Koike, T. Miyoshi, Y. Kurimoto, Y. Sugita, Y. Ito, Y. Suzuki, P. A. Spring, S. Wang, S. Tamate, Y. Tabuchi, Y. Nakamura, K. Ogawa, M. Negoro Abstract In conventional architectures of superconducting quantum computers, each qubit is connected to its own control line, leading to a commensurate increase in the number of microwave lines as the system scales. Frequency-multiplexed qubit-control addresses this problem by enabling multiple qubits to share a single microwave line. However, it can cause unwanted excitation of non-target qubits, especially when the detuning between qubits is smaller than the pulse bandwidth. Here, we propose a selective-excitation-pulse (SEP) technique that suppresses unwanted excitations by shaping a drive pulse to create null points at non-target qubit frequencies. In a proof-of-concept experiment with three fixed-frequency transmon qubits, we demonstrate that the SEP technique achieves single-qubit gate fidelities comparable to those obtained with conventional Gaussian pulses while effectively suppressing unwanted excitations in non-target qubits. These results highlight the SEP technique as a promising tool for enhancing frequency-multiplexed qubit-control. A notable challenge in scaling up superconducting quantum processors is the current wiring scheme, which imposes severe space constraints within refrigerator and generates passive heat loads that can exceed the cooling capacity when the number of qubits is high Krinner et al. 2019 . Frequency-multiplexed qubit-control reduces the number of control lines needed for qubit manipulation Huang et al. 2022 ; Takeuchi et al. 2023 ; Takeuchi et al. 2024 ; Shi et al. 2023 ; Zhao et al. 2023 ; van Dijk et al. 2019 ; Van Dijk et al. 2020 ; Ohira et al. 2024 . In this architecture, a single control line connects the electronics at room temperature to multiple qubits in the cryogenic environment. Inside the dilution refrigerator, the microwave signal is distributed to individual qubits through a divider, as illustrated in Fig. 1 (a). As schematically shown in Fig. 1 (b), by allocating qubit frequencies to ensure sufficient detuning relative to achievable Rabi frequencies van Dijk et al. 2019 ; Mills et al. 2022 ; Lawrie et al. 2023 , it is possible to suppress unwanted excitations. Figure 1: (a) Frequency-multiplexed qubit-control architecture. Multiple qubits can be manipulated using a single microwave line. (b) By properly allocating qubit frequencies such that the spacing is wider than the bandwidth of the drive pulse, off-resonant excitation is mitigated. (c) As the number of qubits increases, the frequency spacing decreases, potentially causing the bandwidth of the drive pulse to overlap with the transition frequencies of non-target qubits. (d) Selective excitation pulse (SEP). The frequency profile of the SEP exhibits null points in the frequency-domain amplitude at the desired frequency. Aligning these null points with the frequencies of non-target qubits effectively mitigates unwanted excitations. However, this signal distribution can induce off-resonant excitations in non-target qubits when the detuning is narrower than the pulse bandwidth [Fig. 1 (c)], degrading the fidelity of quantum gate operations Vandersypen and Chuang 2005 . Typically, for superconducting qubits, pulse lengths of tens of nanoseconds are used for single-qubit gate operations, resulting in a drive pulse bandwidth in the tens of megahertz range. The bandwidth of typical qubit controllers is around a few gigahertz Van Dijk et al. 2020 , limiting the multiplexing factor to tens of qubits per control line. At this level of multiplexing, realizing a fault-tolerant quantum processor with millions of qubits would still require approximately \mathcal{O}(10^{5}) control lines. This already exceeds the physical limitations of the dilution refrigerator Krinner et al. 2019 , implying that the degree of multiplexing is still insufficient. In this work, we propose a selective-excitation-pulse (SEP) technique to enhance the multiplexing factor of the frequency-multiplexed qubit-control architecture. The SEP technique involves designing a drive pulse that exhibits a frequency profile with null points at the frequencies of non-target qubits Linden et al. 1999 ; Vandersypen and Chuang 2005 ; Motzoi et al. 2009 ; Chen et al. 2016 ; Hyyppä et al. 2024 ; Yi et al. 2024 ; Yang et al. 2024 . Therefore, the SEP technique enables the selective excitation of target qubits that share a single microwave line, even when the qubit frequencies are densely allocated, as illustrated in Fig. 1 (d). By applying the SEP technique, we experimentally demonstrate the selective excitation of a single qubit out of three using a shared microwave line. We implement single-qubit gates based on the SEP technique and evaluate their performance using randomized benchmarking Magesan et al. 2011 . The average gate fidelity confirms the effectiveness of the SEP technique. Integrating the SEP technique with the frequency-multiplexed qubit-control architecture enhances the ability to simultaneously control a larger number of qubits using fewer microwave lines. We now outline the general concept of the SEP technique. Suppose a system comprises N qubits connected to a single microwave line via a divider, as illustrated in Figs. 1 (a). In this setup, when the qubits are driven by a microwave pulse at frequency \omega_{\textrm{d}} , the Hamiltonian in the rotating frame of the drive frequency is given by \displaystyle\hat{H}= \displaystyle-\frac{1}{2}\sum_{j}{\Delta_{j}\hat{\sigma}_{j,z}}+\frac{1}{2}\sum_{j}{\left[s_{x}(t)\hat{\sigma}_{j,x}-s_{y}(t)\hat{\sigma}_{j,y}\right]}, (1) where \Delta_{j}=\omega_{j}-\omega_{\textrm{d}} represents the detuning between the drive frequency \omega_{\textrm{d}} and the resonance frequency of the j -th qubit \omega_{j} . Here, \hbar is set to 1. The operators \hat{\sigma}_{j,x},\hat{\sigma}_{j,y} and \hat{\sigma}_{j,z} are the Pauli operators for the j -th qubit. Additionally, s_{x}(t) and s_{y}(t) are the real and imaginary parts of the waveform s(t) , respectively. When the detuning \Delta_{j} is small, a drive pulse intended for a target qubit can excite non-target qubits [Fig. 1 (c)]. The essence of the SEP technique involves designing a pulse that exhibits null points at the frequencies of non-target qubits, thereby preventing their unintended excitation. Let \mathcal{Q}_{\textrm{NT}} denote the set of non-target qubits. The frequency profile of the SEP is described by the following equation: \displaystyle S(\omega)=A\left[\prod_{j\in\mathcal{Q}_{\textrm{NT}}}{(\omega-\omega_{j})}\right]\exp\left[-\frac{(\omega-\omega_{d})^{2}}{2\sigma^{2}}\right], (2) where A is the amplitude and \sigma determines the width of the Gaussian envelope. The frequency of the target qubit is excluded from the product to ensure that the frequency profile does not have a null point at the target qubit frequency. Figure 2: (a) Frequency profiles of the control pulses. The dashed curve shows the Gaussian profile, the solid curve represents the SEP frequency profile derived from Eq. ( 2 ), and the dot-dashed curve corresponds to the profile specified in Eq. ( 3 ). Detailed parameters used to plot the frequency profiles are provided in the main text. (b) Real part s_{x} and (c) imaginary part s_{y} of the waveforms obtained from the frequency profiles shown in (a). Table 1: Summary of the qubit and readout parameters. Q 0 Q 1 Q 2 Qubit frequency (GHz) 8.895 8.818 8.792 Anharmonicity (MHz) -411 -433 -413 Energy relaxation time ( \rm{\mu} s) 25 18 18 Echo dephasing time ( \rm{\mu} s) 21 17 18 Readout-resonator frequency (GHz) 10.456 10.466 10.518 In the experiment, we employ a slightly modified frequency profile given as follows. \displaystyle S(\omega)=A\left[\prod_{j\in\mathcal{Q}_{\textrm{NT}}}{(\omega-\omega_{j})(\omega-2\omega_{\textrm{d}}+\omega_{j})}\right] (3) \displaystyle\times\exp\left[-\frac{(\omega-\omega_{\textrm{d}})^{2}}{2\sigma^{2}}\right]. The correction transforms the frequency profile to be symmetric about the drive frequency \omega_{\textrm{d}} , helping to minimize phase shifts due to

Read the complete text