Jet Size Prediction in Compound Multiphase Bubble Bursting

Zhengyu Yang, Yang Liu, Jie Feng · 2025

Read Jet Size Prediction in Compound Multiphase Bubble Bursting by Zhengyu Yang, Yang Liu, Jie Feng (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-10510.txt.

Introduction

Yang, Liu, and Feng gauge how a slick coat bends jets from burst suds. Burst suds at a gas-wet face can spray fine drops in the air. Those drops bear chem and live stuff to the sky in their wake. What slick coats do to that spray had stayed dim till now. A slick coat that won't mix sits on the sud face here. Jet width strays from the clean-sud tale in the runs.

The team traces crest waves at the air-oil-wet face for the cause. A thin-wave damp frame rests on coat depth and crest spread. A fresh Ohnesorge count with a scale rule fits the runs well. It holds past a wide span of coat depths and flows. The work may hone spray size guesses for sea and sky work.

Catalog record

CREATORZhengyu Yang, Yang Liu, Jie Feng
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE32 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-10510

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Jet Size Prediction in Compound Multiphase Bubble Bursting Zhengyu Yang, Yang Liu, Jie Feng Abstract The Worthington jets from bursting bubbles at a gas-liquid interface can break up into small droplets, aerosolizing chemical and biological substances into the atmosphere and impacting both global climate and public health. Despite their importance in contaminant transport, the influence of adsorbed contaminants on bubble-bursting jet dynamics remains poorly understood. Here, we document how an immiscible compound contaminant layer impacts the jet radius, which deviates from the expected jetting dynamics produced by clean bubble bursting. We rationalize the deviation of the jet radius by characterizing the propagation of the capillary waves at the air-oil-water interface. We develop a linearized wave damping model based on the understanding of the oil thickness profile and the wave dispersion, and we propose a revised Ohnesorge number with a scaling relation that captures the experimental results reasonably well across a wide range of oil layer thicknesses and viscosities. Our work not only advances the fundamental understanding of bubble bursting jets but also offers valuable insights for predicting aerosol size distributions and modeling the transport of airborne contaminants in realistic environmental scenarios. Introduction Bubbles bursting at an air-liquid interface are ubiquitous across a broad range of natural and industrial processes ( bird2010daughter ; feng2014 ; veron2015ocean ; deike2022mass ; bourouiba2021fluid ) . The bursting ejects a multitude of drops and plays a pivotal role in mass transport across the air–liquid interface, as the ejection of tiny drops strongly influences phenomena such as sea spray aerosol production deike2022mass , air pollution ( murphy2016depth ; trainic2020airborne ) , global climate ( wang2017role ; veron2015ocean ; wilson2015 ) , and even transmission of infectious diseases bourouiba2020 . In this context, drops produced by the pinching-off of Worthington jets from bursting bubbles have received significant research attention. Most previous studies have focused on bursting jets of clean bubbles deike2018dynamics ; brasz2018minimum ; ganan2021physics ; gordillo2023theory , yet bubbles with compound interfaces are far more common in practical scenarios. For example, rising bubbles in water bodies often scavenge dispersed substances that they collide with, resulting in contaminated bubble-liquid interfaces walls2014moving ; ji2022water . Such compound bubbles are prevalent in processes like natural gas seeps johansen2017time , oil spills ehrenhauser2014bubble , froth flotation ( zhou2014application ; su2006role ) , and material processing ( behrens2020oil ; visser2019architected ) . Despite their widespread occurrence, the influence of these contaminated compound interfaces on bubble bursting dynamics remains largely unexplored, and no scaling relation is available to predict the jet drop size from compound bubbles to the best of our knowledge. The formation of Worthington jets during bubble bursting is driven by the radially inward interfacial capillary waves excited after the film rupture deike2018dynamics ; brasz2018minimum ; gordillo2019capillary . Consequently, contaminants adsorbed to the bubble surface are expected to impact the kinematics of the jets significantly by affecting interfacial capillary wave propagation. Rich and distinct dynamics have been observed in previous investigations for contaminated bubble bursting. For instance, the suppression of jets has been shown in bursting bubbles with interfaces laden by surfactants pierre2022influence ; vega2024influence or proteins ji2023secondary ; yang2024effect , due to the capillary wave propagation being impeded by Marangoni or surface viscoelastic effects, respectively. In contrast, for a contaminated bubble coated by an immiscible compound layer, a thin and fast jet emerges as the compound interface enhances the damping of the capillary wave, ejecting jet drops with a much smaller size yang2023enhanced . Given the ubiquity and peculiarity of bubble bursting dynamics with non-bare interfaces, a fundamental framework is required to rationalize the influence of contaminants on jet formation and size prediction. Here, with a representative oil-coated bubble configuration, we aim to develop a scaling relation to predict the jet size by quantifying the influence of the immiscible compound layer. We focus on the damping features of the capillary waves during their propagation at the surface of the collapsing bubble cavity. With experimental support, we employ a linearized capillary wave model to rationalize their dispersion and dissipation at the compound bubble surface. A scaling relation based on the revised Ohnesorge number for the jet radius is proposed to capture the experimental trend. Dynamics of oil-coated bubble bursting Figure 1: (a, b) Cavity collapse during the bursting of bubbles coated by a 0.9 mPa s silicone oil layer in a glycerin solution of viscosity 9.5 mPa s. The corresponding oil fractions \psi_{o} are (a) 0.6% and (b) 8.2%, respectively (See SI Videos 1 and 2). The capillary waves propagate down the cavity and finally focus at the cavity bottom, producing an upward jet. The wavelength \lambda_{s} of the secondary wave, which is between the rearmost dominant wave trough and the closest wave trough, is marked and decreases as \psi_{0} increases. The inset shows the upward jet when the jet tip reaches the undisturbed air-water level. The scale bars represent 1 mm and 200 \mu m for the cavity in the main figure and the jet in the inset, respectively. (c) Schematics of bubble bursting producing a jet. During the bursting of an oil-coated bubble, the bubble cap first ruptures and initiates capillary waves downward along the bubble surface. The train of capillary waves contains the rearmost and most energetic dominant wave specified as the dominant wave. We denote the capillary waves excited in front of the dominant wave with a shorter wavelength specified as precursor waves. The jet is produced as a result of dominant wave focusing, overcoming the perturbations of the precursor waves. Figure 1 (a,b) shows the high-speed images for the bursting dynamics of oil-coated bubbles with different oil volume fractions \psi_{o}=3V_{o}/(4\pi R^{3}) while keeping the same liquid combination. Here, V_{o} represents the oil volume and R represents the bubble radius. The capillary waves are initiated after the bubble cap film ruptures. The waves travel down the cavity with their crests moving in phase on both the air–oil and oil–water interfaces, sweeping the oil toward the nadir of the cavity. As the capillary waves encounter a thicker oil layer during their propagation, they split onto oil-air and oil-water interfaces. The capillary waves reach the cavity bottom more quickly at the oil-air interface with a shorter traveling distance than those at the oil–water interface. The capillary waves at the oil-air interface converge and form a truncated cone-shaped cavity within the oil layer, ultimately producing an upward oily jet by the curvature reversal of the cavity bottom. Such dynamics of jet formation is summarized in Figure 1 (c). Characterizing the capillary wave propagation during bubble bursting is critical for describing the jet dynamics krishnan2017scaling ; gordillo2019capillary ; yang2023enhanced . Within the train of capillary waves, we denote the last and most energetic capillary wave as the dominant wave. Meanwhile, the capillary waves preceding the dominant wave, which travel faster with shorter wavelengths, are referred to as precursor waves. Specifically, the eminent wave closest to the dominant wave is considered as an indicator for wave damping due to its longest wavelength among the precursor waves, and we denote this capillary wave as the secondary wave with wavelength \lambda_{s} . For bubbles in a high-viscosity bulk liquid and coated by a thinner layer of low-viscosity oil (Fig. 1 (a)), we observe

Read the complete text