Event-based Impulsive Control for Spacecraft Rendezvous Hovering Phases
Francisco Gavilan, Rafael Vazquez · 2025
Read Event-based Impulsive Control for Spacecraft Rendezvous Hovering Phases by Francisco Gavilan, Rafael Vazquez (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-10438.txt.
Introduction
Sanchez, Louembet, Gavilan, and Vazquez design an event-triggered controller for spacecraft rendezvous hovering, in a paper from twenty twenty-five. The goal is to keep a chaser spacecraft inside a bounded region near its target. The chaser uses impulsive thrusters that can point in any direction. Those thrusters are limited by dead-zone and saturation bounds.
Trigger rules decide when to fire, based on instantaneous reachability to the admissible set. Each control action is a single impulse, keeping computation light. The resulting algorithm is efficient in both processing burden and footprint. Because control is single-impulse, invariance holds only locally, which the authors assess with impulsive systems theory. Numerical results demonstrate the hovering behavior. The approach suits spacecraft that must station-keep cheaply near a target.
Catalog record
| CREATOR | Francisco Gavilan, Rafael Vazquez |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 89 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-10438
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Event-based Impulsive Control for Spacecraft Rendezvous Hovering Phases Francisco Gavilan, Rafael Vazquez Abstract This work presents an event-triggered controller for spacecraft rendezvous hovering phases. The goal is to maintain the chaser within a bounded region with respect to the target. The main assumption is that the chaser vehicle has impulsive thrusters. These are assumed to be orientable at any direction and are constrained by dead-zone and saturation bounds. The event-based controller relies on trigger rules deciding when a suitable control law is applied. The prime control law consists on a single impulse, therefore the trigger rules design is based on the instantaneous reachability to the admissible set. The final outcome is a very efficient algorithm from both computational burden and footprint perspectives. Since the proposed methodology is based on a single impulse control, the controller invariance is local and assessed through impulsive systems theory. Finally, numerical results are shown and discussed. Nomenclature a = semi-major axis A,~B = state and control matrices for Cartesian relative dynamics A_{D},~B_{D} = state and control matrices for relative orbit element dynamics D = relative orbit element state \mathcal{D} = admissible set region of attraction \mathcal{D}_{\text{dz}} = dead-zone set e = eccentricity \mathcal{F}_{xz},~\mathcal{F}_{y} = state increment reachable set G_{xz},~G_{y} = instantaneous reachability indicators g_{w}(\cdot) = multivariate polynomials in D states L(\cdot) = length of a given interval \mathcal{S}_{D} = admissible set t = time U,~V = similarity transformation matrices \underline{x},~\overline{x},~\underline{y},~\overline{y},~\underline{z},~\overline{z} = polytopic constraints bounds X = Cartesian relative state \mathcal{Z} = jump set \delta_{xz},~\delta_{y} = trigger rules threshold \Delta D = relative orbit element state increment \Delta V = impulse \underline{\Delta V} = dead-zone value \overline{\Delta V} = saturation value \Delta^{+} = instantaneous reachable set \Delta^{+}_{\text{sat}} = instantaneous reachable set accounting for control limitations \Delta^{S} = intersection set between admissible set and instantaneous reachable set \lambda_{xz},~\lambda_{y} = control variables \Lambda^{S} = set of admissible control variables with respect to \mathcal{S}_{D} \Lambda_{\text{sat}} = set of admissible control variables with respect to control limitations \Lambda_{\text{sat}}^{S} = set of admissible control variables with respect to \mathcal{S}_{D} and control limitations \mu = Earth gravitational constant \nu = true anomaly \Phi(\nu,\nu_{0}) = state transition matrix from \nu_{0} to \nu Subscripts xz = indicates in-plane motion y = indicates out-of-plane motion dz = indicates dead-zone constraint sat = indicates dead-zone and saturation constraints Supercripts + = indicates a state after control 1 Introduction Spacecraft rendezvous operations have played a key role in the space exploration, see [ 1 ] for an historical review. In fact, new mission concepts have arisen with the increasing popularity of CubeSats in both industry and academia, see [ 2 ] . For example, the novel mission² concept proposed by [ 3 ] , plans to design an autonomous on-orbit reconfigurable telescope. Thus, the ability of a spacecraft to compute control commands on-board is a key component for novel rendezvous operations. This paper is focused on the hovering phase of rendezvous mission, see [ 4 ] . During the rendezvous mission, this phase permits a pause useful for observing the target satellite or waiting for order to continue the mission in safe conditions. A critical feature of the hovering phase to be ensured by the control algorithm is the safety of the mission that mainly consists in avoiding collision while waiting in the vicinity of the leader spacecraft. To achieve such goals, the chaser’s relative position should be maintained within a restricted zone away from the target with a minimal fuel consumption. This hovering region has to be defined in a local frame attached to the leader position while it should exclude the leader spacecraft for safety reasons. Regarding propulsion devices, chemical thusters (for large and heavy spacecraft) and cold gas thrusters (for lightweight spacecraft) are being employed nowadays for geocentric space proximity operations, [ 7 ] . In both cases, the control signal can be modelled in an impulsive way with adequate accuracy. Additionally, the impulse amplitude is constrained not only by saturation but by the minimum impulse bit (minimum force that the thruster can apply). This dead-zone constraint makes the rendezvous planning problem non-convex and difficult to tackle by conventional methods, see [ 8 ] . A vast literature on impulsive rendezvous exists. References [ 9 , 10 ] designed passive collision avoidance trajectories, [ 11 ] studied the trade-off of several rendezvous performance indexes (fuel consumption, flight time and safety), [ 12 ] developed a switching control strategy guaranteeing close-loop stability and [ 13 ] designed a six-degrees of freedom controller based on flatness theory. Some relevant works on impulsive control can also be found in the field of spacecraft flight formation, see [ 14 , 15 ] . Regarding the hovering phase, strategies such as the "pogo" or "teardrop" approaches have been proposed in [ 16 , 4 ] . These approaches are fuel inefficient as the satellite remains in the hovering zone by means of a systematic impulsive control which implements a bouncing-on-the-zone-frontiers strategy. On the contrary, in [ 22 ] the relative orbits periodicity property is exploited to maintain the chaser spacecraft in the hovering zone without control effort in absence of disturbances. In this aim, the relative motion invariants are used as parameters of the relative orbits in the framework of linearized relative motion accordingly with [ 17 , 18 ] . Using [ 17 ] convenient parameterization, [ 19 ] employed polynomial positivity techniques to compute the coordinates of natural periodic relative orbits within a polytopic region. This methodology has also been extended to non-periodic relative orbits, see [ 20 ] . However, the LMI conditions modelling the set membership constraints for a relative orbit have been demonstrated to be numerically cumbersome for spacecraft on-board computation devices. For this reason, in [ 21 ] , an implicitization method was employed to formally describe the admissible set of constrained orbits as polynomial inequalities in terms of the relative state. Finally, [ 22 ] designed a global stability controller, based on a three impulsive sequence, for the previously described admissible set. Rendezvous impulsive control has been studied in the last decade using different approaches such as the MPC framework (see [ 22 ] and references therein) or the hybrid systems framework [ 23 ] . The controllers from the literature deliver periodically the control impulse to be executed. Although stability has been demonstrated in such frameworks, it appears that most of the controls are filtered by the thrusters limitations (the minimum impulse bit in particular). This leads to a slight degradation of the controller performances or even to critical situations closed to instability. In addition, it could be desirable to reduce control computations [ 24 ] . Under this new requirement, the event-based control methodology has emerged as an alternative to classical periodic controllers. In this control paradigm, the commands are computed aperiodically, thus reducing communications between sensors, controllers and actuators, see [ 25 ] for the basics. The event-based methodology can be effectively combined with feedback policies, see [ 26 ] , or MPC schemes as in [ 27 ] . More specifically, event-based control is gaining momentum amongst the spacecraft control community with attitude control applications, see [ 28 , 29 ] . The main purpose of this paper