A Flatness-Based Predictive Controller for Six-Degrees of Freedom Spacecraft Rendezvous Journal: Acta Astronautica

Julio C. Sanchez, Francisco Gavilan, Rafael Vazquez, Christophe Louembet · 2025

Read A Flatness-Based Predictive Controller for Six-Degrees of Freedom Spacecraft Rendezvous Journal: Acta Astronautica by Julio C. Sanchez, Francisco Gavilan, Rafael Vazquez, Christophe Louembet (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-10436.txt.

Introduction

Julio Sanchez and co-authors design a guidance method for a spacecraft closing in on a passive target. The chaser must match the target in both place and orientation, six degrees of freedom in all, while the target rides an eccentric orbit. Fuel thrift, hard limits, and outside disturbances all press on the plan.

Their 2025 paper first flattens the coupled motion into algebraic form, using the attitude flatness property and a state transition matrix. A direct transcription with B-splines then turns the task into a static program. Atop that plan sits a model predictive controller, linearized around the solution, to shrug off disturbances. Numeric tests show the closed loop at work in the journal Acta Astronautica.

Catalog record

CREATORJulio C. Sanchez, Francisco Gavilan, Rafael Vazquez, Christophe Louembet
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE65 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-10436

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Flatness-Based Predictive Controller for Six-Degrees of Freedom Spacecraft Rendezvous Journal: Acta Astronautica Julio C. Sanchez, Francisco Gavilan, Rafael Vazquez, Christophe Louembet Abstract This work presents a closed-loop guidance algorithm for six-degrees of freedom spacecraft rendezvous with a passive target flying in an eccentric orbit. The main assumption is that the chaser vehicle has an attitude control system, based on reaction wheels, providing the necessary torque to change its orientation whereas the number of thrusters is arbitrary. The goal is to design fuel optimal manoeuvres while satisfying operational constraints and rejecting disturbances. The proposed method is as follows; first, the coupled translational and angular dynamics are transformed to equivalent algebraic relations using the relative translational states transition matrix and the attitude flatness property. Then, a direct transcription method, based on B-splines parameterization and discretization of time continuous constraints, is developed to obtain a tractable static program. Finally, a Model Predictive Controller, based on linearization around the previously computed solution, is considered to handle disturbances. Numerical results are shown and discussed. Nomenclature \mathbf{B} Input matrix B Chaser body frame c_{y} , c_{z} LOS region parameters E Mathematical expectation \mathbf{e} Rotation axis e Target eccentricity \mathbf{H} Angular momentum \mathbf{I} Chaser inertia matrix I Inertial geocentric frame \mathbf{Id} Identity matrix k Time interval index L Local-vertical/local-horizontal frame N_{i} Multivariate normal distribution of dimension i N_{p} Planning horizon n Target orbit angular velocity n_{L} LOS constraint grid size n_{M} Reaction wheels constraint grid size n_{T} Number of thrusters p Thruster index \mathbf{R} Rotation matrix r Current MPC step \mathbf{r}_{t} Target position with respect to Earth s Standard deviation T Interval duration t Time \mathbf{u} Velocity increment \mathbf{w} Thruster pointing vector x , y , z Relative position \boldsymbol{\Theta} Matrix full of zeros \theta_{rot} Rotation angle \mu Earth gravitational parameter \boldsymbol{\sigma} Modified Rodrigues parameter \boldsymbol{\Phi} Relative translational transition matrix \boldsymbol{\omega} Chaser angular velocity 1 Introduction Autonomous spacecraft rendezvous and docking is becoming a more important topic in the space industry as access to space continues increasing. From the first rendezvous attempts (Gemini missions) to the Rosetta mission in 2014, the rendezvous manoeuvre has played a key role in different kinds of space missions such as Apollo, ISS, Hubble, etc. After decades of development, many approaches to achieve rendezvous for different mission profiles have been used, see [ 1 ] for an historical review or [ 2 ] for the basics. Nowadays, an increasing interest to demonstrate autonomous rendezvous and flight formation operations for lightweight and low-power spacecraft is arising with CPOD, PRISMA and PROBA-3 missions as examples, see [ 3 , 4 , 5 ] . Typically, the rendezvous problem has been widely studied just considering orbit control making the assumption that translational and rotational motions are decoupled. This problem has been usually tackled by means of direct transcription methods which transform the optimal control problem into a discrete optimization problem as in [ 6 , 7 , 8 , 9 , 10 ] among others. The main advantage of these methods, against indirect ones, is that several kinds of constraints can be easily added to the problem such as approach corridors through the docking axis (V-bar or R-bar guidance), way-points, thrust direction inhibition, obstacle avoidance or fault-tolerant trajectories. However, orbit and attitude control subsystems are mutually coupled, which is mainly due to the dependence of the thrusters orientation on the relative attitude between target and pursuer (at least in the short-term). Spacecraft attitude planning for direction reorientation manoeuvres, which are the ones needed to point the thrusters in an adequate way, is a topic with a vast literature. Reference [ 11 ] proposed two dimensional attitude profiles with time derivatives saturation up to the jerk. Model Predictive Control (MPC) techniques based on linearization around a set point have been used in the works of [ 12 , 13 ] . A remarkable approach is the one followed by [ 14 , 15 ] which is based on the attitude dynamics flatness property (see [ 16 ] for more details about flatness theory) that allowed them to transform the attitude dynamics into algebraic relations avoiding the need of numerical integration. Regarding previous works on six-degrees of freedom relative motion, adaptive tracking controllers based on feedback has been considered by [ 17 ] for rendezvous and by [ 18 , 19 ] for flight-formation while strategies based on backstepping control have been employed by [ 20 ] for flight-formation and by [ 21 , 22 ] for rendezvous operations. Sliding mode control has also been explored by [ 23 ] . References [ 24 , 25 , 26 , 27 ] proposed a two stages approach, first they used an optimal control method for the translational motion, LQR in [ 24 , 25 , 26 ] or convex optimization in [ 27 ] , and then they designed an attitude controller to obtain the orientations demanded by the translational plan. Reference [ 28 ] proposed a covering map based on quaternions to address 6-DOF open-loop motion planning based on basis functions and closed-loop kinematic feedback. The authors of the present paper proposed in [ 29 ] a method based on the translational state transition matrix and the attitude flatness property to solve. Amongst the previous works, dual quaternions, which contain information of both translational and rotational states, were used in [ 17 , 19 ] . Concerning the number of thrusters, [ 17 , 20 , 19 ] assumed a pair of them available on each direction, six in total, whereas [ 24 ] considered four thrusters and [ 25 , 27 , 26 , 22 , 29 ] studied the case of single-thruster operations. The results of [ 28 ] are applied to both a classical six thrusters configuration and a single thruster one. The previous works assumed that torque is provided by an independent ACS system whereas [ 21 ] considered six thrusters in a cuboid layout configuration providing both force and torque. Apart from rendezvous and flight-formation operations, coupled motion has also been studied for geostationary satellites station-keeping [ 30 ] and solar sails control [ 31 ] . In this paper, we consider a spacecraft equipped with reaction wheels and an arbitrary number of thrusters which seeks to rendezvous with a target flying in an eccentric orbit. The employed formulation allows to consider the coupled problem in an optimal way without any assumptions on the number of available thrusters which increase the applicability of the algorithm to different types of missions. In a similar way as [ 32 ] , a hybrid system is considered where the propulsive action is modelled as impulses but the attitude control is time continuous. The proposed solution method transforms the time-continuous dynamics into algebraic relations by means of the translational state transition matrix and the attitude flatness property. Then, this equivalent optimal control problem is parameterized and discretized to obtain a finite tractable static program. Once an open-loop solution is obtained, a closed-loop MPC scheme, see [ 33 ] , based on linearization around the previously computed solution, is developed to reject disturbances and cope with unmodelled dynamics. The structure of this paper is as follows. Section 2 describes the coupled translational and angular motion for

Read the complete text