Tunable lateral displacement and spin beam splitter for ballistic electrons in two-dimensional magnetic-electric nanostructures

Xi Chen 1, Chun-Fang Li 1,2, Yue Ban 1 · 2025

Read Tunable lateral displacement and spin beam splitter for ballistic electrons in two-dimensional magnetic-electric nanostructures by Xi Chen 1, Chun-Fang Li 1,2, Yue Ban 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-08242.txt.

Introduction

An electron beam crossing a striped magnetic gate shifts sideways, and the size and sign of the shift depend on the electron's spin. Xi Chen, Chun-Fang Li, and Yue Ban compute those shifts in a 2025 paper for a flat electron gas crossed by ferromagnetic stripes. The stripes can be magnetized in the same direction or in opposed directions.

Shifts come out both negative and positive, and they can be dialed by a voltage that sets an electric step and by the strength of the stripes' field. In the opposed layout the two spin kinds land in fully separate places, which is exactly what a spin beam splitter needs. Such a splitter is a basic part for electronics that would compute with spin rather than charge.

Catalog record

CREATORXi Chen 1, Chun-Fang Li 1,2, Yue Ban 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-08242

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tunable lateral displacement and spin beam splitter for ballistic electrons in two-dimensional magnetic-electric nanostructures Xi Chen 1, Chun-Fang Li 1,2, Yue Ban 1 Abstract We investigate the lateral displacements for ballistic electron beams in a two-dimensional electron gas modulated by metallic ferromagnetic (FM) stripes with parallel (P) and anti-parallel (AP) magnetization configurations. It is shown that the displacements are negative as well as positive, which can be controlled by adjusting the electric potential induced by the applied voltage and the magnetic field strength of FM stripes. Based on these novel phenomena, we propose an efficient way to realize a spin beam splitter, which can completely separate spin-up and spin-down electron beams in the AP configuration by their corresponding spatial positions. pacs 73.23.Ad, 72.25-b, 73.40.Gk, 85.35.-p It is well established that ballistic electrons in the two-dimensional electron gas (2DEG) are reflected, focused, diffracted, and interfered in a manner similar to the electromagnetic waves in dielectrics [ 1 , 2 ] , which results from the quantum-mechanical wave nature of electrons, thus have given rise to a field of research which is best described as ballistic electron optics in 2DEG systems. In the past two decades, many electronic analogues of optical devices [ 3 , 4 ] have been studied, including electron gratings, electron waveguide, electron interferometer, and electron wave beam splitter . Recently, electron spin beam splitter and spin filter in different 2DEG systems have been more attractive [ 5 , 6 , 7 , 8 , 9 , 10 ] for the nascent field called “Spintronics” [ 11 ] , which is a multidisciplinary field whose central subject is the active control and manipulation of spin degree of freedom in solid systems. For example, Khodas et al. [ 8 ] have proposed the basic schemes for filtration and control of the electron spin by electron spin optics in the 2DEG structures with Rashba and Dresselhaus spin-orbit coupling. Moreover, spin beam splitters or spatially separating spin filters have also been investigated by other optics-like phenomena,respectively, such as spin double refraction [ 9 ] and negative refraction [ 10 ] . However, considering some disadvantages of the 2DEG structures with spin-orbit coupling, Frustaglia et al. [ 12 ] have studied spin filters by pure quantum interference effect. Dragoman [ 13 ] has lately presented an alternative spin beam splitter in 2DEG systems, in terms of magnetic depopulation of sub-bands in magnetic fields. In this Brief Report, we will investigate the lateral displacements for ballistic electron beams in a 2DEG modulated by metallic ferromagnetic (FM) stripes with parallel (P) and anti-parallel (AP) magnetization configurations. The displacements can be negative and positive, which can be controlled by adjusting the total electric potential and the magnetic field strength of FM stripes. More interestingly, we propose a spin beam splitter as a potential application of an intriguing phenomenon in which, large and opposite lateral displacements may occur simultaneously for spin-down and spin-up electron beam in the AP configurations. As a matter of fact, The displacements are closely related to the Goos-Hänchen (GH) effect in optics [ 14 ] , and are the electronic analogous to the simultaneously large and opposite generalized GH shifts for TE and TM light beams in an asymmetric double-prism configuration [ 15 ] . Thus, the tunable negative or positive displacement introduced here provides a completely different mechanism of spin-polarized electron splitting, also at the nanoscale level but with more design flexibility. The system under consideration is a magnetically modulated 2DEG formed usually in a modulation-doped semiconductor heterostructure [ 16 ] , which can be experimentally realized by depositing two metallic ferromagnetic (FM) stripes on top and bottom of the semiconductor heterostructure, as schematically depicted in Fig. 1 (a). For the small distances between 2DEG and FM stripes, the magnetic field provided by two FM stripes is approximated [ 17 ] as B_{z}(x)=[B_{1}\delta(x+a/2)-\chi B_{2}\delta(x-a/2)] , and the total electric potential induced by the negative voltage applied directly to the 2DEG U(x)=U\Theta(a/2-|x|) are homogenous in the y direction and vary only along the x axis [ 18 ] , which is shown in Fig. 1 (b), where \chi represents the parallel (P) and anti-parallel (AP) magnetization configuration of two FM stripes ( \chi=+1 for P and \chi=-1 for AP). The Hamiltonian describing such a system in the (x,y) plane, within the single particle effective mass approximation, is H=\frac{p_{x}^{2}}{2m^{*}}+\frac{[p_{y}+e{\bf A}_{y}(x)]^{2}}{2m^{*}}+U(x)+\frac{eg^{*}}{2m_{0}}\frac{\sigma\hbar}{2}B_{z}(x), (1) where m^{*} is the electron effective mass and m_{0} is the free electron mass, (p_{x},p_{y}) are the components of the electron momentum, g^{*} is the effective Landé factor of Figure 1: (a) Schematic illustration of the magnetic-electric nanostructure with two metallic FM stripes deposited on top and bottom of the semiconductor heterostructure; (b) The magnetic-electric barrier models exploited here corresponds to the P and AP magnetization configurations of two FM stripes, respectively. (c) The positive (1) and negative (2) lateral displacements of ballistic electron beams in this structure. electron, \sigma=+1/-1 for spin up/down electrons, and {\bf A}_{y}(x) is the y-component of the vector potential given, in Landau gauge, by \vec{{\bf A}}=[0,{\bf A}_{y}(x),0] . We express all the relevant quantities in dimensionless form: (1) the magnetic field B_{z}(x)\rightarrow B_{0}B_{z}(x) , (2) the vector potential {\bf A}(x)\rightarrow B_{0}l_{B}{\bf A}(x) , (3) the coordinates {\bf r}\rightarrow l_{B}{\bf r} , (4) the energy E\rightarrow E\hbar\omega_{c} , where \omega_{c}=eB_{0}/m^{*} is the cyclotron frequency and l_{B}=\sqrt{\hbar/eB_{0}} is the magnetic length with B_{0} as some typical magnetic field. For GaAs and an estimated B_{0}=0.1T we have l_{B}=813nm , \hbar\omega_{c}=0.17meV , g^{*}=0.44 , and m^{*}=0.067m_{0} . A two-dimensional electron beam of incidence energy E comes from the left with an incidence angle \theta_{0} in (x,y) plane, as is depicted in Fig. 1 (c). Let \Psi_{i}(\vec{x})=A(k_{y})\exp\{i[k^{l}_{x}(x+a/2)+k_{y}y]\} be the plane wave component of the incident beam, where k^{l}=\sqrt{2E} , k_{y}=k^{l}\sin\theta , k^{l}_{x}=k^{l}\cos\theta , \theta stands for the incidence angle of the contributed plane wave, and A(k_{y}) is the angular-spectrum distribution. Because the system is translational invariant along the y direction, the solution of the stationary Schrödinger equation H\Psi(x,y)=E\Psi(x,y) can be written as \Psi(x,y)=\psi(x)\exp{(ik_{y}y)} . The wave function \psi(x) satisfies the following one-dimensional Schrödinger equation: \left\{\frac{d^{2}}{dx^{2}}-2\left[E-U_{eff}(x,k_{y},\sigma)\right]\right\}\psi(x)=0, (2) where the effective potential in the barrier region U_{eff}(x,k_{y},\sigma)=U+[k_{y}+A_{y}(x)]^{2}/2+m^{*}g^{*}\sigma B_{z}(x)/4m_{0} depends not only on the wave vector k_{y} , but also on the interaction between the electron spin and the nonhomogeneous magnetic field. According to Eq. ( 2 ) and boundary conditions, that is, the continuity of the wave functions and their derivations at the boundaries, the wave function of the corresponding plane wave of transmitted beam is found to be \Psi_{t}(\vec{x})=t(k_{y})A(k_{y})\exp\{i[k^{r}_{x}(x-a/2)+k_{y}y]\}, and the amplitude transmission coefficient t(k_{y})=e^{i\phi}/g is determined by the following complex number, ge^{i\phi}=2k^{r}_{x}k^{\prime}_{x}/(M+iN), where \displaystyle M=k^{\prime}_{x}(k^{l}_{x}+k^{r}_{x})+\frac{m^{*}g\sigma}{2m_{0}}(k^{l}_{x}B_{2}-\chi k^{r}_{x}B_{1})\tan k^{\prime}_{x}a, (3) \displaystyle N=-\frac{m^{*}g\sigma}{2m_{0}}(B_{1}-\chi B_{2})k^{\prime}_{x}+\left[k^{l}_{x}k^{r}_{x}+k^{\prime 2}+\left(\frac{m^{*}g\sigma}{2m_{0}}\right)^{2}(\chi B_{1}B_{2})\right]\tan k^{\prime}_{x}a, (4) so that the total phase shift of the transmitted beam at x=a/2 with respect to the incident one at x=-a/2 is \tan\phi\equiv\frac{N}{M}, where k^{\prime}_{x}=[2E-(k_{y}+B_{1})^{2}]^{1/2} and k^{r}_{x}=[2E-(k_{y}+B_{1}-\chi B_{2})^{2}]^{1/2} . As indicated in Fig. 1 (c), the lateral displacement of the transmitted beam is defined, according to the stationary phase approximation [ 2 , 19 , 20 ] , as s=-d\phi/dk_{y0}, (5) where the subscript 0 in this paper denotes the values taken at k_{y}=k_{y0} , namely, \theta=\theta_{0} . It is clearly seen from Eqs. ( 3 ) and (

Read the complete text