Enhancing the sensitivity of single-microwave-photon detection with bandwidth tunability.
Louis Pallegoix 1 , Jaime Travesedo 1 , Alexandre S. May 1,2 , Léo Balembois 1 , Denis Vion 1 , Patrice Bertet* 1 and Emmanuel Flurin* · 2025
Read Enhancing the sensitivity of single-microwave-photon detection with bandwidth tunability. by Louis Pallegoix 1 , Jaime Travesedo 1 , Alexandre S. May 1,2 , Léo Balembois 1 , Denis Vion 1 , Patrice Bertet* 1 and Emmanuel Flurin* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-07354.txt.
Introduction
Seven physicists in France report a counter for single microwave photons in a 2025 paper. The device rests on a superconducting qubit, a tiny circuit that acts like an artificial atom. A new tuning circuit lets the team set the band of light the counter accepts.
That tuning, plus better fabrication, pushed the counter to a very low noise floor. The team confirmed the performance by catching the faint microwave glow of single spins. Such counters can serve work on quantum circuits and on faint signals from space. The paper gives the design changes and the measured gains in plain figures.
Catalog record
| CREATOR | Louis Pallegoix 1 , Jaime Travesedo 1 , Alexandre S. May 1,2 , Léo Balembois 1 , Denis Vion 1 , Patrice Bertet* 1 and Emmanuel Flurin* |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-07354
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Enhancing the sensitivity of single-microwave-photon detection with bandwidth tunability. Louis Pallegoix 1 , Jaime Travesedo 1 , Alexandre S. May 1,2 , Léo Balembois 1 , Denis Vion 1 , Patrice Bertet* 1 and Emmanuel Flurin* Abstract We report on the characteristics of a microwave photon counter device based on a superconducting transmon qubit. Its design is similar to [ 4 ] , with an additional bandwidth tuning circuit that permits tuning the detection bandwidth over an order of magnitude to optimize the device efficiency and noise. Owing to this new feature and to improvements in device fabrication, a power sensitivity of 3 ⋅ 10 − 23 W / Hz 3\cdot 10^{-23}\ \mathrm{W}/\sqrt{\mathrm{Hz}} is reached. We confirm the high performance of the device by measuring single spin microwave fluorescence. I Introduction Single-photon detection has long been a fundamental tool in quantum technologies, with well-established applications in the optical domain, ranging from fluorescence microscopy [ 31 , 22 , 9 , 14 ] to quantum communication [ 18 ] and boson sampling [ 5 ] ; however, extending single-photon detection into the microwave regime presents significant challenges. The energy of microwave photons—of the order of µeV—is several orders of magnitude lower than that of optical photons, requiring detectors to operate at cryogenic temperatures to suppress thermal noise and reduce the background thermal photon population. Despite these challenges, single-microwave-photon detectors (SMPDs) have emerged as critical tools for advancing quantum sensing and information processing. Their ability to detect individual microwave photons has opened possibilities for a wide range of applications, including the detection of weak incoherent microwave emitters, such as electron spins in solids [ 1 , 41 , 10 ] , and even searches for hypothetical dark-matter particles [ 26 , 16 ] . SMPDs also hold potential for primary thermometry at low temperatures [ 38 ] and for use in quantum illumination protocols [ 3 ] . Moreover, these detectors can play a key role in quantum information processing [ 33 , 13 , 6 ] , enabling heralded entanglement between superconducting qubits [ 29 ] , improving qubit readout schemes [ 30 ] , and facilitating the generation of robust quantum states [ 7 ] . Various SMPD designs have been proposed and implemented, with most relying on superconducting qubits [ 28 , 1 , 29 , 34 , 20 , 36 , 25 , 37 , 19 , 35 , 15 , 24 , 21 , 8 , 23 ] , quantum dots [ 42 , 17 ] or bolometric detectors [ 27 ] . These devices have demonstrated promising results, achieving sensitivities ranging from 10^{-21} to 10^{-22}\,\mathrm{W/\sqrt{Hz}} at microwave frequencies ; however, there remain limitations in terms of bandwidth, detection efficiency, and dark count rates that must be addressed to further enhance their performance. In this work, we present an enhanced version of the SMPD introduced in Ref. [ 4 ] , which is based on a superconducting qubit and a four-wave mixing (4WM) process. The design integrates a frequency-tunable Purcell filter, providing control over the detection bandwidth. Since the thermal noise power is proportional to the detection bandwidth, this tunability significantly reduces thermal noise and decreases the dark count rate to 30\ \mathrm{s}^{-1} , improving the overall detector performance. Additionally, advancements in the fabrication process have led to an extended qubit relaxation time ( T_{1} ), which in turn enhances the detection efficiency to 0.8 . As a result of these improvements, the detector achieves a power sensitivity of 3\cdot 10^{-23}\,\mathrm{W/\sqrt{Hz}} , representing a significant advancement over previous designs. We confirm the improved sensitivity of the SMPD by detecting the microwave fluorescence from a single spin. II SMPD principle of operation II.1 Device design The SMPD device (see Figs. 1 a and b) consists of a transmon qubit (mode q , frequency \omega_{q} ), capacitively coupled to two harmonic oscillator modes, called the buffer (mode b , frequency \omega_{b} ), and the waste (mode w , frequency \omega_{w} ). The buffer is connected to the input line of the device through another resonator at frequency \omega_{pb} . The latter serves as Purcell filter to decouple the qubit from the input line, while also setting the effective buffer energy coupling rate \kappa_{\mathrm{b,c}} . The total energy-loss rate of the buffer resonator is \kappa_{b}=\kappa_{\mathrm{b,c}}+\kappa_{\mathrm{b,i}} , where \kappa_{\mathrm{b,i}} represents the internal losses of the buffer. The waste is connected to an output line through another Purcell filter, at frequency \omega_{pw} , with a rate \kappa_{w} . Other relevant parameters are the qubit energy-relaxation time T_{1} and equilibrium excited-state population, p_{\mathrm{th},q} , which varies with the qubit temperature T , in the T\ll\hbar\omega/k_{B} limit, as p_{\mathrm{th},q}=\frac{1}{e^{\frac{\hbar\omega_{q}}{k_{B}T}}-1} . In this formula, T is not necessarily the cryostat base temperature, as various heating effects (due to infrared radiation in particular) may lead to a higher effective qubit temperature. For optimal operation as an energy detector, both the frequency and bandwidth of the device need to be matched to the source of interest, be it a spin [ 4 , 41 ] or a dark-matter candidate [ 12 ] . Frequency tuning is achieved by inserting a superconducting quantum interference device (SQUID) into the buffer mode, resulting in a buffer frequency \omega_{b}(\phi_{b}) that depends on the flux threading the buffer SQUID loop, \phi_{b} . An asymmetric SQUID is purposely chosen to minimize sensitivity to flux noise. Bandwidth tuning is achieved by inserting a second SQUID into the Purcell filter mode, resulting in a buffer coupling rate \kappa_{\mathrm{b,c}}(\phi_{\mathrm{pb}}) that depends on the flux threading the Purcell SQUID loop, \phi_{\mathrm{pb}} . This SQUID is symmetric to maximize the bandwidth-tuning range. II.2 Four-wave mixing The working principle of photon detection relies on a 4WM process that maps the presence or absence of a photon onto the state of the transmon qubit. The nonlinear element is provided by the qubit Josephson junction. The 4WM is activated by a microwave signal (called the pump, frequency \omega_{p} ) of amplitude \xi_{0} , applied to the qubit via a pump line connected capacitively to the qubit (see Fig. 1 ). When the pump frequency approximately satisfies the relation \omega_{b}+\omega_{p}=\omega_{q}+\omega_{w}-\chi_{w} , the dominant process is described by the Hamiltonian H_{\mathrm{4WM}}=\sqrt{\chi_{b}\chi_{w}}(\xi_{0}bq^{\dagger}w^{\dagger}+\xi_{0}^{*}b^{\dagger}qw), (1) where \chi_{b} (resp. \chi_{w} ) is the qubit dispersive coupling to the buffer mode (resp. the waste mode) [ 28 ] . This Hamiltonian reversibly converts a buffer and pump photon into a qubit excitation and waste photon. Dissipation of the waste photon into the output line ensures that the process is irreversible ; nonetheless, the qubit remains excited long enough to be readout subsequently, and it can thus be used as a flag that frequency conversion occurred. An approximate description is obtained by eliminating the qubit degree of freedom, yielding an effective Hamiltonian H_{\mathrm{eff}}=g_{\mathrm{4WM}}bw^{\dagger}+h.c. with g_{\mathrm{4WM}}=\sqrt{\chi_{b}\chi_{w}}\xi_{0} . This describes the parametric coupling between the buffer and waste modes, similar to the Josephson parametric converter for instance. Assuming that \kappa_{\mathrm{b,i}}\ll\kappa_{\mathrm{b,c}} , the efficiency of frequency conversion under this process is \eta_{\mathrm{4WM}}=4C/(1+C)^{2} , where C=\frac{4\chi_{b}\chi_{w}|\xi_{0}|^{2}}{\kappa_{w}\kappa_{b}} is the system cooperativity. Unit efficiency is reached when C=1 . Physically, this occurs when the frequency-conversion rate 4|g_{\mathrm{4WM}}|^{2}/\kappa_{w} is equal to the input resonator coupling rate, \kappa_{b} . This condition can always be achieved by