Bias Voltage Controlled Inversions of Tunneling Magnetoresistance in van der Waals Heterostructures Fe 3 GaTe 2 /hBN/Fe 3 GaTe 2

Lihao Zhang, Miao He, Xiaoyu Wang, Haodong Zhang, Keying Han, Yonglai Liu, Lei Zhang, Yingchun Cheng, Jie Pan, Zhe Qu, Zhe Wang · 2025

Read Bias Voltage Controlled Inversions of Tunneling Magnetoresistance in van der Waals Heterostructures Fe 3 GaTe 2 /hBN/Fe 3 GaTe 2 by Lihao Zhang, Miao He, Xiaoyu Wang, Haodong Zhang, Keying Han, Yonglai Liu, Lei Zhang, Yingchun Cheng, Jie Pan, Zhe Qu, Zhe Wang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-06063.txt.

Introduction

Lihao Zhang and co-authors report that a voltage can flip the sign of a tunneling effect in a layered magnetic device, in a 2025 paper. The device stacks a magnetic crystal, a thin barrier, and the same magnetic crystal. The effect they track is how much the resistance changes when the two magnetic layers point the same way or in opposite ways. Room temperature tests are used throughout.

The flip happened at about the same voltage, near 0.625 volts, across many devices and temperatures. That sameness shows the effect is robust. To explain it, they built a model based on the spin-split energy states at high energy. Tweaks for crystal misalignment brought the model close to the test values. The work guides voltage control of spin flow.

Catalog record

CREATORLihao Zhang, Miao He, Xiaoyu Wang, Haodong Zhang, Keying Han, Yonglai Liu, Lei Zhang, Yingchun Cheng, Jie Pan, Zhe Qu, Zhe Wang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-06063

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Bias Voltage Controlled Inversions of Tunneling Magnetoresistance in van der Waals Heterostructures Fe 3 GaTe 2 /hBN/Fe 3 GaTe 2 Lihao Zhang, Miao He, Xiaoyu Wang, Haodong Zhang, Keying Han, Yonglai Liu, Lei Zhang, Yingchun Cheng, Jie Pan, Zhe Qu, Zhe Wang Abstract We report the bias voltage-controlled inversions of tunneling magnetoresistance (TMR) in magnetic tunnel junctions composed of Fe 3 GaTe 2 electrodes and hBN tunneling barrier, observed at room temperature. The polarity reversal of TMR occurs consistently at around 0.625 V across multiple devices and temperatures, highlighting the robustness of the effect. To understand this behavior, we developed a theoretical model incorporating spin-resolved density of states (DOS) at high energy levels. By adjusting the DOS weighting at different k-points to account for misalignment between the crystal structure of electrodes in experimental devices, we improved agreement between experimental and theoretical inversion voltages. Our results provide valuable insight into the voltage-controlled spin injection and detection in two-dimensional magnetic tunnel junctions, with implications for the development of energy-efficient spintronic devices. Introduction Magnetic tunnel junctions (MTJs) are critical components in spintronic devices RMP2004 ; tsymbal2003spin ; RMP2020 ; Review2020 , such as hard disk drive read heads and magnetoresistive random-access memory. An MTJ consists of a tunneling barrier sandwiched between two ferromagnetic electrodes, each with spin polarized density of states (DOS) at the Fermi level. This structure enables substantial tunneling magnetoresistance (TMR) when the relative magnetization of the two ferromagnets switches between parallel and antiparallel configurations. A key advantage of MTJs is their non-volatile nature—the resistance states remain stable without continuous power, making MTJs attractive for emerging memory technologies, including in-memory computing for Artificial Intelligence and the Internet of Things. However, MTJs with conventional thin films will face challenges as devices scale down to meet the requirements of advanced technological nodes Nature2022Review , due to issues such as atomic intermixing at interfaces. MTJ composed with purely van der Waals (vdW) 2D materials offer a promising alternative. These materials can retain high quality even at atomic thickness and form atomically flat, defect-free interfaces without atomic intermixing geim2013van . Since the discovery of 2D magnets huang2017layer ; gong2017discovery ; deng2018gate ; fei2018two , all-vdW MTJs—such as those based on Fe 3 GeTe 2 and hBN—have demonstrated good performance NL2018 . Various combinations of tunneling barriers FGT2020MoS2 ; FGTAM2021 ; FGTNM2022 ; FGTNC2023 ; FGT2024MoSe and ferromagnetic electrodes FGaT2022CPL ; FGaT2023NanoS ; FGaT2023AMI ; FGaT2023SB ; FGaT2024Info based on purely 2D materials have been explored to enhance device functionality. Among the intriguing phenomena observed in vdW MTJs is the inversion of TMR polarity under controlled bias voltage FGTNM2022 ; FGTNC2023 ; FGaT2023AMI ; FGaT2023SB ; FGT2024MoSe ; FGaT2024Info , TMR being positive under certain bias voltage and changing to negative under other bias voltages. This effect suggests that bias voltage can regulate spin injection and detection, and holds great potential for energy-efficient spintronic devices. The voltage-controlled TMR inversion in vdW MTJs is generally attributed to high-energy localized spin states in the ferromagnetic electrodes. Previous studies on Fe 3 GeTe 2 -based MTJs with hBN, WSe 2 , and GaSe tunneling barriers have quantitively discussed the voltage thresholds for TMR polarity reversal, often finding that experimental results exceed theoretical predictions FGTNM2022 ; FGTNC2023 . For MTJs using ferromagnet Fe 3 GaTe 2 (FGT) with Curie temperature above room temperature which has great potential for future applications, TMR polarity reversal were reported with tunneling barrier of semiconducting WS 2 and WSe 2 , but these studies did not quantitatively address the underlying mechanisms FGaT2023AMI ; FGaT2024Info . Figure 1 : Basic characteristics of Fe 3 GaTe 2 flakes and magnetic tunnel junction (MTJ) of Fe 3 GaTe 2 /hBN/Fe 3 GaTe 2 . a Crystal structure of Fe 3 GaTe 2 (up) and schematic of MTJ (down). b Temperature dependence of longitudinal resistance of Fe 3 GaTe 2 . The inset show the optical image of the device. c Anomalous Hall effect of Fe 3 GaTe 2 above room temperature. d Voltage dependence of current for MTJ at 300 K. e Temperature dependence of tunneling resistance. The measurement is done with constant bias voltage of 20 mV and no magnetic field is applied. f Tunneling magnetoresistance (TMR) of MTJ at 300 K, the applied AC bias is 20 mV and DC voltage is 0 V. In this work, we investigate the behavior of MTJs with FGT electrodes and an insulating hBN barrier. The very large band gap of high quality hBN ensure the electronic transport would be tunneling for the whole investigated temperature range. It also results in large tunneling barrier height so its momentum dependence can be ignored, thus we can focus on the crystal structure alignment of ferromagnetic electrodes. On the experimental side, we demonstrate bias voltage-controlled TMR inversion at room temperature, and show that the voltage threshold for TMR polarity reversal remains consistent across different temperatures and devices. Furthermore, we present theoretical insights that more accurately match the experimental data by applying reduced weighting to the DOS away from the \Gamma point, highlighting the importance of considering in-plane momentum conservation during tunneling and the reality that the crystal lattices of the ferromagnetic electrodes are not aligned. Experiments and Results We began our experiments by characterizing the thin flakes of FGT, whose crystal structure is shown in Fig. 1a. The single crystals were grown using the chemical vapor transport method FGaT , and mechanically exfoliated in the glove box filled with Nitrogen. An optical image of an exfoliated FGT flake on pre-deposited Cr/Au electrodes is shown in the inset of Fig. 1b. We measured both the longitudinal resistance and Hall resistance of the flake with the cryostat from Cryogenic Company, as shown in Figs. 1b and 1c, respectively. The four-probe resistance measurements exhibit metallic behavior, as expected for FGT. The anomalous Hall effect (AHE) shows a characteristic square shape at room temperature, which changes above 320 K due to the formation of magnetic domains FGTDomain . The AHE disappears around 340 K, confirming the high quality of our FGT crystals and their Curie temperature. We assembled a van der Waals heterostructure FGT/hBN/FGT using a standard pick-up technique with PDMS/PC stamps inside a glove box. The inset of Fig. 1d displays an optical image of the fabricated device, in which approximately 4 layers of hBN were used as the tunneling barrier. Fig. 1d shows the voltage dependence of the current measured at 300 K. The I-V curve is slightly non-linear at high voltages, being consistent with the expected behavior of tunnel junctions. The resistance only change slightly (around 20%) during the cool down process, further confirming the tunneling nature of the electronic transport in the device. Fig. 1f presents the TMR when a magnetic field is applied along the c-axis of the FGT. Due to differences in the thickness and shape of the two FGT electrodes, the coercive fields of the two ferromagnets differ. This results in an antiparallel magnetization configuration over a certain magnetic field range, while a parallel configuration is observed in the remaining field range. Typical spin-valve TMR behavior is thus clearly evident at 300 K. Figure 2 : Bias voltage controlled inversion of TMR at 300 K . TMR at 300 K

Read the complete text