Tailoring the Glucose Oxidation Activity of Anodized Copper Films on Microfabricated Platforms

Filippo Franceschini, Catarina Fernandes, Koen Schouteden, Jon Ustarroz, Jean Pierre Locquet, Irene Taurino · 2025

Read Tailoring the Glucose Oxidation Activity of Anodized Copper Films on Microfabricated Platforms by Filippo Franceschini, Catarina Fernandes, Koen Schouteden, Jon Ustarroz, Jean Pierre Locquet, Irene Taurino (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-05953.txt.

Introduction

Filippo Franceschini and co-authors tune copper films to speed a sugar reaction in a 2025 study. Turning glucose into other chemicals by oxidation is a key step in biosensing and in energy devices. Copper electrodes given a surface treatment called anodization can drive that reaction well, but the recipe matters.

By adjusting the treatment's settings, the team could choose which copper compound forms on the surface, among three oxides and hydroxides with different activity. One recipe, run in a strong alkaline bath at a set voltage, grew a highly active copper oxide layer. Sensors built this way beat bare copper by wide margins in sensitivity across two concentration ranges. Their detection limit was extremely low. The films sit on microfabricated platforms, a format ready for small devices.

Catalog record

CREATORFilippo Franceschini, Catarina Fernandes, Koen Schouteden, Jon Ustarroz, Jean Pierre Locquet, Irene Taurino
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE55 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-05953

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tailoring the Glucose Oxidation Activity of Anodized Copper Films on Microfabricated Platforms Filippo Franceschini, Catarina Fernandes, Koen Schouteden, Jon Ustarroz, Jean Pierre Locquet, Irene Taurino Abstract Glucose oxidation is a fundamental reaction in biosensing and energy conversion, and anodized copper electrodes have emerged as promising catalysts for its enhancement. This paper systematically investigates the link between anodization parameters and glucose oxidation on thin copper films, unraveling crucial insights into their optimization. By careful control of the anodization parameters, distinct species can be favoured, such as Cu 2 ​ O \mathrm{Cu_{2}O} , Cu ​ ( OH ) 2 \mathrm{Cu(OH)_{2}} , and CuO, with varying catalytic activities. Applying a polarization in 1 M KOH at 0 V (vs Ag|AgCl) results in the formation of a highly active surface CuO layer, which delivers significant performance improvements compared to the bare copper electrode. Namely, a 55 % sensitivity gain in the 0.1 mM - 0.5 mM range, and a remarkable 73 % gain in the 0.75 mM - 2mM range. Furthermore, the manufactured electrodes display an extremely low limit of detection — only 0.004 mM. Such an exceptional result can be ascribed to the scalable and reproducible manufacturing done directly on cleanroom-compatible platforms. These insights not only clarify the effect of thin copper film anodization on glucose oxidation, but also chart a practical path towards improving the real-world efficiency of copper-based integrated systems for biosensing and energy conversion. keywords Copper, anodization, glucose, catalysis, microchip † † email: [email protected] † † affiliation: Department of Physics and Astronomy, KU Leuven, Leuven † † affiliation: Department of Electrical Engineering, KU Leuven, Leuven † † affiliation: Department of Physics and Astronomy, KU Leuven, Leuven † † affiliation: Chemistry of Surfaces, Interfaces and Nanomaterials (ChemSIN), Université libre de Bruxelles, Brussels † † affiliation: Electrochemical and Surface Engineering (SURF) Department, Université libre de Bruxelles, Brussels † † affiliation: Department of Physics and Astronomy, KU Leuven, Leuven † † affiliation: Department of Electrical Engineering, KU Leuven, Leuven † † suppinfo: 1 Introduction Glucose oxidation is crucial in various domains such as biosensing, biofuel cells, and energy storage. Among these, diabetes monitoring currently has the greatest economic and societal relevance, with a market value of $11.71 billion in 2021 Das et al. (2022) and more than 537 M people affected by the disease WHO () . Enzymes, such as glucose oxidase, are commonly used in glucose sensing technologies, exhibiting good sensitivity and selectivity Teymourian et al. (2020) . However, their storage and usage conditions require careful control due to their sensitivity to pH and temperature Wang et al. (2013) . The limited stability of these sensors, typically lasting a few weeks, is considered their primary weakness Wei et al. (2020) ; Jing et al. (2022) . Compared to their enzymatic counterparts, non enzymatic sensors not only are more durable, but they also exhibit greater sensitivities and can be more easily miniaturized, as they are not limited by macro-sized molecules Aun et al. (2021) . Over the last decades, a plethora of non enzymatic glucose electrocatalysts has been developed and investigated. Early works highlighted how noble metals (e.g., Pt Taurino et al. (2016) ; Vassilyev et al. (1985) , Pd Yang et al. (2014) , and Au Pasta et al. (2010) ; Hsiao et al. (1996) ) can directly oxidize glucose in neutral solutions. Nevertheless, the high cost and low resistance towards chloride poisoning is still limiting their application for glucose sensing Bagotzky et al. (1970) ; Pasta et al. (2010) . As a result, transition metal oxides (e.g., \mathrm{Ni(OH)_{2}} Franceschini and Taurino (2022) , \mathrm{Cu_{x}O} Naikoo et al. (2022) , \mathrm{Co_{3}O_{4}} Ding et al. (2010) ) have also been explored, sometimes with carbon-based materials as supports (e.g., carbon nanotubes Gupta et al. (2021) and boron-doped diamond Gao et al. (2022) ). Among these, copper oxides are particularly appealing due to their exceptional catalytic activity and resistance to poisoning Li et al. (2010) ; Colon et al. (1993) ; Xie and Huber (1991) . Substantial research effort has been devoted to synthesizing \mathrm{Cu_{x}O} -based electrodes in diverse forms, such as nanoparticles Singh et al. (2022) , nanocubes Jiménez-Rodríguez et al. (2021) , nanoneedles Yang et al. (2017) , nanowires Zhang et al. (2012) , and nanoflowers Yuan et al. (2021) . A common fabrication approach involves directly immobilizing copper oxide catalysts onto a supporting material such as glassy carbon. However, the weak adhesion of \mathrm{Cu_{x}O} structures to the surface often leads to unreliable results. To address this issue, the use of a polymer binder, such as Nafion ® , has been proposed Meher and Rao (2013) ; Ashok et al. (2019) . Alternatively, copper oxides can be synthesized on the surface of Cu substrates through wet-chemical methods Zhang et al. (2012) or thermal oxidation Cao (2022) . Although these techniques offer improved adhesion of the oxide to the substrate surface, achieving large-scale and reproducible synthesis of uniform materials remains challenging. In contrast, electrochemical oxidation methods, such as potentiostatic, potentiodynamic or galvanostatic anodization, have been employed as direct fabrication methods for highly sensitive and stable \mathrm{Cu_{x}O} -based glucose sensors Babu and Ramachandran (2010) ; Dhara et al. (2016) ; Wang et al. (2012) ; Fan et al. (2019) ; Gizinski et al. (2020) . Compared to traditional synthesis methods, anodization offers several advantages. It is a relatively simple and low-cost technique that can be conducted under ambient conditions without the need for high temperatures or toxic chemicals. Moreover, it allows for precise control over the thickness and morphology of the surface oxide/hydroxide layer, enabling the reproducible design of remarkably active surfaces. Depending on the chosen electrolyte and applied potential/current density, different morphologies can be produced. Notable mentions include the galvanostatic production of nanowires by Wu et al. Wu et al. (2005) in KOH solution, the controlled nanowire diameter by potentiostatic anodization (10-50 V) in carbonate solution by Stȩpniowski Stepniowski et al. (2019) , nanoporous structures in acqueous/nonacqueous electrolytes at high voltage ( \approx 10V ) by Allam et al. Allam and Grimes (2011) . Although promising, the research has solely investigated the properties of thick copper foils which don’t necessarily translate to microfabricated sensors. This discrepancy arises from the generally higher resistivity of thin films compared to bulk electrodes Cui et al. (2012) ; Zhang et al. (2004) ; a challenge further exacerbated by the complexity of removing \mathrm{O_{2}} impurities in widespread PVD sytems such as sputtering Schmiedl et al. (2008) ; Su et al. (2016) ; Chandra et al. (2006) . Moreover, the lack of consensus on the mechanism glucose oxidation on copper combined with the mixed phase composition of most anodized surfaces, requires the validation of each technique for glucose oxidation. To address this issue, researchers have directly evaluated the ability of differently anodized copper foils to oxidize glucose. Nonetheless, most of these studies Babu and Ramachandran (2010) ; Fan et al. (2019) ; Li et al. (2014) ; Xu et al. (2013) have focused on specific sets of anodization parameters without providing a justification for their selection. Recently, the group of Noda Anantharaj et al. (2021) investigated the effect of the hydroxide ion strength in the anodization solution for methanol oxidation. However intriguing, their work studied the effect of the \mathrm{OH^{-}}

Read the complete text