Tomographic identification of all molecular orbitals in a wide binding energy range
Anja Haags, Dominik Brandstetter, Xiaosheng Yang, Larissa Egger, Hans Kirschner, Alexander Gottwald, Mathias Richter, Georg Koller, François C. Bocquet, Christian Wagner, Michael G. Ramsey, Serguei Soubatch, Peter Puschnig, F. Stefan Tautz · 2025
Read Tomographic identification of all molecular orbitals in a wide binding energy range by Anja Haags, Dominik Brandstetter, Xiaosheng Yang, Larissa Egger, Hans Kirschner, Alexander Gottwald, Mathias Richter, Georg Koller, François C. Bocquet, Christian Wagner, Michael G. Ramsey, Serguei Soubatch, Peter Puschnig, F. Stefan Tautz (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-05287.txt.
Introduction
Anja Haags and a team of co-authors present a study from twenty twenty-five on mapping all the electron orbits of a molecule stuck on a metal face. A tool called photoemission orbital tomography reads orbit shapes from the spray of electrons knocked off by light. Past work caught a few orbits at a time. Here the team spans a wide range of binding energy.
Their test case is a flat carbon molecule on a copper face. From the spray at each energy, they pull out the share of each orbit in the total. Dozens of orbits of two kinds are named, a near full set. Math models of the same face are then graded against the data. One named functional scores best.
Catalog record
| CREATOR | Anja Haags, Dominik Brandstetter, Xiaosheng Yang, Larissa Egger, Hans Kirschner, Alexander Gottwald, Mathias Richter, Georg Koller, François C. Bocquet, Christian Wagner, Michael G. Ramsey, Serguei Soubatch, Peter Puschnig, F. Stefan Tautz |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 105 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-05287
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tomographic identification of all molecular orbitals in a wide binding energy range Anja Haags, Dominik Brandstetter, Xiaosheng Yang, Larissa Egger, Hans Kirschner, Alexander Gottwald, Mathias Richter, Georg Koller, François C. Bocquet, Christian Wagner, Michael G. Ramsey, Serguei Soubatch, Peter Puschnig, F. Stefan Tautz Abstract In the past decade, photoemission orbital tomography (POT) has evolved into a powerful tool to investigate the electronic structure of organic molecules adsorbed on surfaces. Here we show that POT allows for the comprehensive experimental identification of all molecular orbitals in a substantial binding energy range, in the present case more than 10 eV. Making use of the angular distribution of photoelectrons as a function of binding energy, we exemplify this by extracting orbital-resolved partial densities of states (pDOS) for 15 π \pi and 23 σ \sigma orbitals from the experimental photoemission intensities of the prototypical organic molecule bisanthene (C 28 H 14 ) on a Cu(110) surface. In their entirety, these experimentally measured orbital-resolved pDOS for an essentially complete set of orbitals serve as a stringent benchmark for electronic structure methods, which we illustrate by performing density functional theory (DFT) calculations employing four frequently-used exchange-correlation functionals. By computing the respective molecular-orbital-projected densities of states of the bisanthene/Cu(110) interface, a one-to-one comparison with experimental data for an unprecedented number of 38 orbital energies becomes possible. The quantitative analysis of our data reveals that the range-separated hybrid functional HSE performs best for the investigated organic/metal interface. At a more fundamental level, the remarkable agreement between the experimental and the Kohn-Sham orbital energies over a binding energy range larger than 10 eV suggests that—perhaps unexpectedly—Kohn-Sham orbitals approximate Dyson orbitals, which would rigorously account for the electron extraction process in photoemission spectroscopy but are notoriously difficult to compute, in a much better way than previously thought. Preprint: APS/123-QED I Introduction Interfaces between organic molecules and metals play a central role in functional devices in nanoscience and nanotechnology. [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 ] When a molecule adsorbs on a metallic surface, several processes determine the resulting electronic structure of the interface. First, the molecule gets physically attracted by van der Waals interactions. [ 9 , 10 ] Then, the ionization potential (IP) and electron affinity (EA) levels of the molecule are renormalized because of the proximity to the metal or, in a dense layer, also because of neighboring molecules, both as a result of polarization effects. [ 11 , 12 , 13 , 14 , 15 ] When the molecule approaches the substrate further, the molecular orbitals start to overlap with the metallic states, and thus hybridized states arise at the interface. [ 16 , 17 , 18 , 19 , 20 , 21 ] If the resulting level alignment permits, the native electronic states may be further reconfigured and charge may be transferred, resulting in the population of formerly unoccupied molecular states or the depopulation of formerly occupied ones. Many examples of such charge transfers have been reported. [ 22 , 23 , 24 , 17 , 25 , 26 , 27 , 28 ] Figure 1: Projected density of states of bisanthene/Cu(110) computed using two different exchange-correlation functionals (see main text). The green and gray shaded areas depict the density of states projected on copper and carbon atoms, respectively. The molecular-orbital-projected density of states (MOPDOS) of the former lowest unoccupied molecular orbital of bisanthene, populated due to charge donation from the substrate, is shown in red. The MOPDOS of all other molecular \pi orbitals are shown by orange curves. All these mechanisms must be taken into account if a valid theoretical description of organic/metal interfaces is to be attempted. The most commonly applied framework for this purpose is density functional theory (DFT). It provides the ground-state electron density and the ground state total energy as the primary observables, which are constructed from the single-particle Kohn-Sham orbitals and energies. It is common practice to relate these Kohn-Sham orbital energies to single-electron excitation energies, which are accessible from experimental techniques such as photoemission or scanning tunneling spectroscopy. Yet, this lacks a rigorous theoretical justification, except for the highest occupied Kohn-Sham orbital which can be identified with the ionization potential of the system [ 29 , 30 ] . For lower lying Kohn-Sham orbitals no such equivalent connection is currently known. Furthermore, the equivalence between the highest occupied Kohn-Sham orbital and the ionization potential holds, strictly speaking, only for the exact exchange-correlation functional. In practical DFT calculations, however, one has to resort to approximations for the exchange-correlation functional, and moreover is usually interested in the electronic density of states (DOS) well beyond the Fermi energy. This is illustrated in Fig. 1 which displays DFT results for the prototypical organic/metal interface bisanthene (C 28 H 14 ) on Cu(110) obtained with the PBE [ 31 ] and HSE [ 32 , 33 ] exchange-correlation functionals, representatives of the 2^{\textrm{nd}} and 4^{\textrm{th}} rung of the Jacob’s ladder, respectively. It is revealing to decompose the total DOS into contributions from the substrate (green), the molecular subsystem (gray), and ultimately, from individual molecular orbitals (yellow and red lines). Here, the yellow lines correspond to the molecular-orbital-projected density of states (MOPDOS) for all 14 occupied \pi orbitals of isolated bisanthene. Thus, each curve represents the offspring of a molecular Kohn-Sham level in the coupled system. The figure shows that there are a few molecular orbitals close to the Fermi energy, i.e. , above the Cu d band. It is common practice to analyze the energy level alignment of these frontier orbitals to search, e.g. , for a possible charge transfer between the molecule and the metal surface. In the present case of bisanthene/Cu(110), the calculations do indeed suggest a (partial) charge transfer into the lowest unoccupied molecular orbital (LUMO, red curve), however, as the comparison between the PBE and GGA results demonstrates, to a different extent. This situation calls for an experimental method that is capable of providing such orbital-resolved densities of states as benchmarks for theory. Fig. 1 also conveys another important message: most of the molecular density of states is found in a broad binding energy interval below the d band. In this energy range, the molecular density of states appears to be even more sensitive to the different exchange-correlation potentials than it does above the d band. Thus, it would be desirable to use this rich information on orbital binding energies for benchmarking density functional approaches and also methods that go beyond them, e.g. , the GW method in the framework of many-body perturbation theory. [ 34 , 35 , 36 , 37 , 38 ] Before this can be done, however, two questions need to be answered in the affirmative. First, can Kohn-Sham orbitals far below the frontier orbitals be interpreted as Dyson orbitals, [ 39 , 40 ] and thus be assumed to carry information about electron extraction, even if no rigorous theoretical proof for this conjecture is known? [ 41 , 42 ] And second, can such an orbital-resolved DOS actually be measured in this energy range? In the present work we demonstrate the latter and thereby experimentally confirm the former. The most direct way to measure the