Direct coupling of continuum and shell elements in large deformation problems

Astrid Pechstein, Michael Neunteufel · 2025

Read Direct coupling of continuum and shell elements in large deformation problems by Astrid Pechstein, Michael Neunteufel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-05251.txt.

Introduction

Astrid Pechstein and Michael Neunteufel tackle a hard problem in computer simulation: how to join thin shell parts to solid three-dimensional parts in one model, in work from 2025. Thin structures, such as reinforcements in soft material or partly filled hollow parts, appear in many designs. Modeling with solid elements is accurate but too costly. Shell elements cost less, yet joining the two kinds often causes errors known as locking.

The authors build on a mixed shell element that uses bending moments as extra unknowns. The element stays free of locking, handles large shape changes well, and needs no smooth shell surface. It links to volume elements by sharing the movement values at the shell's center surface. Tests confirm accuracy for thin-walled parts set inside soft matrix material, on unstructured meshes with refinement guided by stress and bending moments.

Catalog record

CREATORAstrid Pechstein, Michael Neunteufel
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE84 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-05251

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Direct coupling of continuum and shell elements in large deformation problems Astrid Pechstein, Michael Neunteufel Abstract . In many applications, thin shell-like structures are integrated within or attached to volumetric bodies. This includes reinforcements placed in soft matrix material in lightweight structure design, or hollow structures that are partially or completely filled. Finite element simulations of such setups are highly challenging. A brute force discretization of structural as well as volumetric parts using well-shaped three-dimensional elements may be accurate, but leads to problems of enormous computational complexity even for simple models. One desired alternative is the use of shell elements for thin-walled parts, as such a discretization greatly alleviates size restrictions on the underlying finite element mesh. However, the coupling of different formulations within a single framework is often not straightforward and may lead to locking if not done carefully. Neunteufel and Schöberl proposed a mixed shell element where, apart from displacements of the center surface, bending moments are used as independent unknowns. These elements were not only shown to be locking free and highly accurate in large-deformation regime, but also do not require differentiability of the shell surface. They can directly be coupled to classical volume elements of arbitrary order by sharing displacement degrees of freedom at the center surface, thus achieving the desired coupled discretization. As the elements can be used on unstructured meshes, adaptive mesh refinement based on local stress and bending moments can be used. We present computational results that confirm exceptional accuracy for problems where thin-walled structures are embedded as reinforcements within soft matrix material. 2020 Mathematics Subject Classification 74S05; 74B20; 74K25; 74K20 1. Introduction As lightweight structures are designed, one often meets with stiff thin-walled structures (the reinforcement ) in combination with a soft matrix. Reinforcements may be submerged within the matrix, as well as form the surface of the lightweight structure [ 1 , 2 , 3 ] . Finite element simulations of these combined structures prove to be computationally expensive due to their adverse geometric dimensions. As thin-walled structures are resolved by conventional elements, the thickness of the reinforcements makes small mesh sizes in these regions necessary, which leads to an excessive growth in the number of degrees of freedom. To alleviate the restrictions on the mesh size, solid shell elements have been developed especially for the discretization of thin structures. Optimally, the reinforcement can then be discretized using only one layer of solid shell elements, where the mesh size in thickness direction is independent of the in-plane size of these elements. This greatly reduces the number of elements, and thus the number of unknowns to be computed. One well-known approach is the use of assumed natural strains as additional, element-internal degrees of freedom in the solid-shell elements, as was proposed by Sze and Yao [ 4 ] , and extended to the large deformation case in [ 5 ] . Another large deformation element based on the Hu–Washizu three-field principle is presented by Klinkel et al. [ 6 ] . As these elements are constructed in such a way that degrees of freedoms and shape functions coincide with conventional elements on the reinforcement/matrix interface, coupling of the different element types in a combined structure is straightforward when using a matching pair of solid shell and standard elements. Limitations of this approach are found at the boundaries of flat reinforcement structures: here, the thickness still limits the mesh size (although much less so than in the case of standard elements), and the connection of several shells along a common line (e.g. a T-joint) is not straightforward, especially if the shells do not meet at an angle of 90\text{\,}\mathrm{\SIUnitSymbolDegree} . A different approach is the modeling of thin-walled reinforcements as shells, which are included as surface or interface within the soft matrix. This approach shows great advantages from the point of view of mesh generation, as then the thickness does not appear in the finite element mesh at all. Reinforcements are modelled as shell, only its mid-surface is discretized. Under the kinematic assumptions of Kirchhoff–Love theory, elastic energy on the shell mid-surface can be derived analytically, leading to fourth order partial differential equations for the displacement, see e.g. the monograph [ 7 ] . Finite elements have to satisfy \mathcal{C}^{1} continuity, where no kinks in the displacement are allowed. For the geometrically linear case, one well-known example is the Argyris triangle from the TUBA family [ 8 ] . Extensions to large deformations were, however, of limited success [ 9 ] . A quadrilateral element suitable for large deformations was proposed by Vetyukov [ 10 ] . It is an element from the family of absolute nodal coordinate formulation based elements, and uses positions and assorted slope vectors as degrees of freedom. Additionally, we cite the triangular six-node element by Dau et al. [ 11 ] and the monograph by Bernadou and James [ 12 ] for different Kirchhoff–Love shell element formulations. Common to all these specific shell elements is the fact that the degrees of freedom for the mid-surface displacement do not match the nodal degrees of freedom of elements used in the matrix. Thus, coupling of these discretizations is not straightforward, and leads to locking or loss of accuracy if not done carefully. In the field of isogeometric analysis (IGA), splines of higher smoothness are used as ansatz functions in the discretization, see the monograph by Cottrell, Hughes, and Bazilevs [ 13 ] for an introduction. Splines lend themselves naturally to the discretization of Kirchhoff–Love shells, as the \mathcal{C}^{1} differentiability can be ensured through the choice of order and multiplicity of knots in the discretization. Bazilevs et al. [ 14 ] proposed to use T-splines for volumes as well as plate domains, for solids as well as fluid mechanics. Interpolation by non-uniform rational B-splines (NURBS) was proven to be effective for modeling classical shells by Kiendl et al. [ 15 ] , and extended to compressible and incompressible hyperelastic materials in [ 16 ] . Regarding reinforcements, shell elements for fibre-reinforced composites were designed by Schulte and co-workers [ 17 ] . When the same class of IGA elements can be used for reinforcement and matrix, a direct coupling of the approaches is possible, see Liu et al. [ 18 ] . However, the discretization of complex reinforced structures requires a discretization consisting of multiple patches. For these multiple patches, \mathcal{C}^{1} continuity is lost, and needs to be re-established through additional constraints. Schuß et al. [ 19 ] presented a methodology applicable to Kirchhoff–Love shells. However, the joint discretization of matrix volume and shell structure using IGA splines is certainly not straightforward. Also, the treatment of kinks in the surface or joints of more than one shell along a common line is to be done with care. Last, correct representations of the coupling of trimmed surfaces and volumes has not been treated in the literature to the best knowledge of the authors. Pechstein and Schöberl introduced the Tangential-Displacement-Normal-Normal-Stress (TDNNS) method [ 20 ] and proved that it is locking-free in the sense of solid-shell elements for the small deformation case in [ 21 ] . An extension to the large deformation case could be established by Neunteufel et al. [ 22

Read the complete text