A Quasi-deterministic Channel Model for Underwater Acoustic Communication Systems

Yuxuan Yang, Yilin Ma, Hengtai Chang, Cheng-Xiang Wang · 2025

Read A Quasi-deterministic Channel Model for Underwater Acoustic Communication Systems by Yuxuan Yang, Yilin Ma, Hengtai Chang, Cheng-Xiang Wang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-04238.txt.

Introduction

Yuxuan Yang, Yilin Ma, Hengtai Chang, and Cheng-Xiang Wang propose a 2025 model for underwater sound channels, the path signals take between submerged senders and receivers. Shallow water bends and bounces sound in shifting ways, so a good model must be both exact and flexible. Their design blends two older approaches to get both traits.

Direct sound rays are handled by a precise ray tool, while bounced and scattered rays use a geometry based random model. From the blend, the team derives how the channel shifts over time and pitch. Key measures include delay spread and pitch drift. Test runs matched the math, backing the model for modem design.

Catalog record

CREATORYuxuan Yang, Yilin Ma, Hengtai Chang, Cheng-Xiang Wang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-04238

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Quasi-deterministic Channel Model for Underwater Acoustic Communication Systems Yuxuan Yang, Yilin Ma, Hengtai Chang, Cheng-Xiang Wang Abstract In this paper, a quasi-deterministic (Q-D) model for non-stationary underwater acoustic (UWA) channels is proposed. This model combines the BELLHOP deterministic model and geometry-based stochastic model (GBSM), which provides higher accuracy and flexibility. Different propagation components in shallow water are classified as D-rays, R-rays and F-rays in the proposed model, where D-rays are modeled by BELLHOP while both R-rays and F-rays are modeled by GBSM. Some important channel statistical properties, including time-frequency correlation function (TF-CF), Doppler power spectrum density (PSD), average Doppler shift, and RMS Doppler spread are derived and simulated. Finally, simulation results illustrate the correctness of the proposed model. I Introduction To achieve global coverage in 6G wireless communication systems, UWA communications is receiving increasing attention in recent years [ 1 , 2 , 3 ] . Thus, as the first step to design UWA communication systems, accurate and general models for UWA channels are of great importance. So far, there have been many studies on channel modeling [ 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 ] . Those existing models are generally divided into three types, i.e., deterministic models, stochastic models, and Q-D models. For UWA channels, deterministic models like ray-tracing models [ 5 , 6 ] and stochastic models like GBSMs [ 7 , 8 , 9 ] are widely used. In [ 5 ] , the effects of multipath and Doppler are studied under the application of ray-tracing method. In [ 6 ] , BELLHOP tool was used to model four different frequency bands and two types of sea bottom for UWA channels. These models always have high accuracy but lack of flexibility. Compared with deterministic models, stochastic models, especially GBSMs, have higher flexibility. These models calculate distances and delays through geometry method, and can fit different scenarios by modifying the model parameters [ 7 , 8 , 9 ] . In [ 7 , 8 , 9 ] , three kinds of GBSMs considering different conditions for shallow water scenario were proposed. Although GBSM can fit different scenarios due to its high flexibility, its accuracy may not be suitable for some specific scenarios that require high accuracy and proper flexibility. Q-D models are obtained by combining deterministic models and stochastic models, which have more flexibility than deterministic models and higher accuracy than stochastic models. In [ 10 ] , a Q-D model for an urban environment was introduced. In [ 11 ] , a Q-D model for millimeter-wave channels was proposed. In [ 12 ] , a detailed tutorial on how to develop a Q-D model was provided. In [ 13 ] , two kinds of method for simplifying the computational complexity were proposed. Q-D model can achieve high accuracy and acceptable flexibility. However, to the best of the author’s knowledge, Q-D model is rarely used in underwater scenarios. To fill this gap, a Q-D model combining BELLHOP and GBSM for UWA channels is proposed in this paper. The reminder of this paper is organized as follows. In Section II, a Q-D model combining BELLHOP and GBSM for UWA channels is proposed. In addition, the derivation of channel transfer function (CTF) is introduced. In Section III, the expressions of channel statistical properties are presented. Section IV presents the simulation results of the mentioned channel properties. The conclusions are finally drawn in Section V. II A Quasi-Deterministic Model Combining BELLHOP and GBSM The model is designed for UWA channels in shallow water, and both transmitter (Tx) and receiver (Rx) have no autonomous motion. In shallow water scenario, the speed of acoustic wave can be considered as constant and can propagate in a straight line [ 17 ] . Fig. 1 presents different components of Q-D model for UWA channels, including D-rays, R-rays and F-rays. D-rays represent reflection rays between the two boundaries and the LoS component, which can be generally considered stable in this scenario. According to the experiment results, the number of collisions between rays and the sea surface and bottom, denoted by N_{\mathrm{S}} and N_{\mathrm{B}} , usually satisfies 2N_{\mathrm{S}}+2N_{\mathrm{B}}\leq 8 [ 14 , 15 , 16 ] . Because of the roughness of boundaries, the rays are scattered and distributed around the reflection point, these diffuse scattering rays are modeled as R-rays. In addition, there are also multipath components caused by scatterers in water, which are modeled as F-rays. Different with R-rays, the clusters of F-rays are modeled as twin-cluster pairs, and the twin-clusters of F-rays will experience birth and death process over time. Fig. 1: Different components of Q-D model For UWA channels, the channel impulse response (CIR) considering Doppler effect can be written as h(t,\tau)=\sum_{i=1}^{N}A_{i}{\delta}(t-\tau_{i})e^{j2\pi a_{i}f_{c}t} (1) where A_{i} , \tau_{i} and a_{i} are channel gain, delay and Doppler factor of the i -th path, respectively. By applying the Fourier transform to the delay, the CTF can be obtained. The total CTF of UWA channels can be represented by the superposition of CTFs of the D-rays, R-rays and F-rays components, and is given by H(t,f)=\sqrt{S_{\mathrm{D}}}H_{\mathrm{D}}(t,f)+\sqrt{S_{\mathrm{R}}}H_{\mathrm{R}}(t,f)+\sqrt{S_{\mathrm{F}}}H_{\mathrm{F}}(t,f) (2) where S_{D} , S_{R} and S_{F} are power coefficients for D-rays, R-rays and F-rays, respectively. II-A D-rays Modeling The CTF of D-rays can be written as H_{\mathrm{D}}(t,f)=\sum_{i=1}^{N}K_{i}A_{i}^{\mathrm{D}}(f)e^{-j2\pi(f_{c}+f)\tau_{i}^{\mathrm{D}}}e^{j2\pi a_{i}f_{c}t} (3) where N is the number of D-rays, K_{i} represents the correction factor, which is similar to the Ricean factor, and is defined as K_{1}=\sqrt{K/K+1},K_{i}=\sqrt{1/{(N-1)(K+1)}}(i\neq 1) . The frequency-related channel gain is represented by A_{i}^{\mathrm{D}}(f) , f_{c} and f represent the carrier frequency and signal frequency, respectively. The delay is represented by \tau_{i}^{\mathrm{D}} . All these parameters needed for modeling are obtained by BELLHOP simulation. Moreover, a_{i} is the Doppler factor, and will be introduced at the end of this section, and t represents the time instant. In addition, in order to facilitate the simulation of the CTFs of R-rays and F-rays, parameters including the angle of the i -th D-ray in the azimuth direction, represented by \theta_{i} , the number of the i -th D-ray contacting with the surface (bottom), represented by s_{i} ( b_{i} ), and coordinates of the first reflection point \rm{A} on the i -th path relative to Tx as well as the last reflection point \rm{Z} on the i -th path relative to Rx, i.e., \left(x_{i}^{\mathrm{A}},y_{i}^{\mathrm{A}}\right) and \left(x_{i}^{\mathrm{Z}},y_{i}^{\mathrm{Z}}\right) are also obtained through BELLHOP simulation. II-B R-rays Modeling For R-rays, the CTF is presented as H_{\mathrm{R}}(t,f)=\sum_{i=2}^{N}\sum_{j=1}^{M}A_{i,j}^{\mathrm{R}}(t,f)e^{-j2\pi\left(f_{c}+f\right)\tau_{i,j}^{\mathrm{R}}(t)}e^{j2\pi a_{i}f_{c}t} (4) where M is the number of scattering rays. The index of path starts at 2, since the 1 th path represents the LoS path. To calculate the delay of each scattering ray, the total distance of the j -th scattering ray around the i -th D-ray d_{i,j}^{\mathrm{R}}(t) is classified into three categories, i.e., d_{i,j}^{\mathrm{R}}(t)=d_{i,j}^{\mathrm{R,A}}(t)+d_{i,j}^{\mathrm{R,Z}}(t)+d_{i,j}^{\Delta}(t) , where d_{i,j}^{\mathrm{R,A}}(t) and d_{i,j}^{\mathrm{R,Z}}(t) represent the first bounce distance between Tx and the j -th scattering point around the reflection point \rm{A} of the i -th D-ray and the last bounce between Rx and the j -th scattering point around the reflection point \rm{Z} of the i -th D-ray, respectively. The distance between the first and last scatterers is d_{i,j}^{\Delta}(t)=\left(D_{i}-d_{i,j}^{\mathrm{R,A}}(t)-d_{i,j}^{\mathrm{R,Z}}(t)\right)\cdot e^{\Delta d} , where D_{i} is the total distance of the i

Read the complete text