Unsteady load alleviation on highly flexible bio-inspired wings in longitudinally oscillating freestreams

Álvaro Martínez-Sánchez, Álvaro Achirica-Villameriel, Nicolas Doué, Valérie Ferrand, Erwin R. Gowree · 2025

Read Unsteady load alleviation on highly flexible bio-inspired wings in longitudinally oscillating freestreams by Álvaro Martínez-Sánchez, Álvaro Achirica-Villameriel, Nicolas Doué, Valérie Ferrand, Erwin R. Gowree (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-02399.txt.

Introduction

Álvaro Martínez-Sánchez and co-authors study how flexible, feather-like wings ride out gusts, in a 2025 paper. A standard airfoil profile was tested first in rigid form, in wind experiments and simulations. Gusts arriving head-on make wing loads surge and swing, wasting energy and straining structure. Birds cope with such air naturally, which inspired the design.

Adding flexibility in simulation changed the flow in a helpful way. The bendy wing disturbed the thin laminar bubble on its surface, settling the boundary layer into steadier turbulence. Oscillating forces on the wing dropped as a result. Composite materials could give aircraft the same relief. The authors suggest birds may save energy in rough air through a like effect.

Catalog record

CREATORÁlvaro Martínez-Sánchez, Álvaro Achirica-Villameriel, Nicolas Doué, Valérie Ferrand, Erwin R. Gowree
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE48 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2501-02399

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Unsteady load alleviation on highly flexible bio-inspired wings in longitudinally oscillating freestreams Álvaro Martínez-Sánchez, Álvaro Achirica-Villameriel, Nicolas Doué, Valérie Ferrand, Erwin R. Gowree Abstract This study delves into the aerodynamic behavior of a highly flexible NACA 0012 aerofoil, drawing inspiration from avian feathers to handle a gust. We first examined unsteady flow on a rigid wing both experimentally and numerically and then explored the implications of introducing wing flexibility purely numerically. Our findings underscore the potential of composite materials in alleviating the oscillating aerodynamic forces on a wing under a streamwise gust. This behavior is attributed to its capacity to destabilize the laminar separation bubble, fostering a more stable turbulent boundary layer. While direct avian evidence remains limited, it is postulated that in nature, such mechanisms could mitigate undesired wing flapping, optimizing energy consumption in perturbed environments. Journal: Journal of Fluids and Structures 1 Introduction Unmanned aerial systems (UAS) are increasingly being deployed in harsh environmental conditions for a broad array of applications, such as fire detection, search and rescue, urban air mobility, and wildlife monitoring, to name a few [ 1 , 2 ] . Such conditions consist of flow disturbances, including turbulent eddies or gusts emanating from urban canyons, building wakes, or landscape topography [ 3 ] , which reduce the operability of the aerial vehicle. These systems typically have small dimensions, on the order of a metre, and operating speeds between 10 and 15 m/s, which are comparable to the gusts and eddies encountered in disturbed environments [ 4 , 5 , 6 ] . Due to their small size and low speed, these vehicles are more susceptible to flight stability and control issues arising from unstable flow environments. The inherently unsteady flow over low Reynolds number flyers as a result of laminar separation, recirculation bubbles, or boundary layer transition, and the associated fluid-structure interaction remain inadequately understood, with limited predictive capabilities and experimental evidence. Moreover, recent studies [ 7 , 8 ] have demonstrated that the dynamics of the laminar separation bubble can be altered in the presence of the high levels of turbulence intensity typically encountered in urban environments. Therefore, further investigation into the behaviour of these systems in perturbed environments is essential for enhancing the existing numerical prediction methodologies used for their design and optimisation, as well as for developing control strategies, such as wing morphing. This is particularly crucial in densely populated areas where these systems must operate reliably and safely. Coupled with the above, the harsher environmental conditions brought about by climate change will impose stricter limitations on the operability of aerial vehicles. Clear-air turbulence (CAT) is responsible for 24% of aircraft accidents at high altitudes, and due to climate change, the frequency of CAT in the range of 100 mm to 1 km in length scales has already increased by almost twice [ 9 ] . At low altitudes, perturbations take the form of crosswinds and a variety of turbulence scales, particularly in urban environments, with structures ranging from milimeters to the scale of the largest component of the urban topology. Since these large structures are of the order, if not larger, than the length scales of the vehicles, they can destabilise the whole vehicle, leading to catastrophic events. These perturbations will also impact the robustness of ground vehicles and renewable energy systems. Whilst man-made aerial vehicles face strict limitations during these harsh atmospheric conditions, birds can handle them and, in many cases, exploit these perturbations to cover long distances through dynamic soaring, as seen in albatrosses [ 10 ] , or to gain altitude through thermal soaring, as observed in raptors [ 11 ] . Furthermore, birds can tolerate and alleviate the undesirable aerodynamic loading imposed by the unsteady flow field through the complex musculoskeletal structure of their wings [ 12 , 13 ] . For example, recent studies have shown that barn owls can handle vertical gusts by changing the pitch and dihedral angle of wings through deflection at the shoulder [ 14 ] . Birds can also control flow perturbations by exploiting the transmissibility and flexibility of their feathers, which can serve as both sensors and control mechanisms. Scans of the wings sections, as illustrated in Figure 1 , show that the aft 50\% of the wings section is very thin due to the alignment of the feathers. In this region, feathers possess varying degrees of flexibility, which potentially enhances overall lift characteristics by flapping or popping up [ 15 ] . The vibration or flutter of feathers under aerodynamic loading has also been demonstrated and characterized for hummingbirds in wind tunnel experiments [ 16 ] . This characteristic can also contribute to reducing the oscillation of the wing structure by locally altering the flow over the wing or by disrupting the local vortex shedding responsible for the unsteady aerodynamic loading [ 17 ] . The aforementioned observations collectively suggest that the flexibility of the feathers acts to control the unsteady flow. This could potentially promote boundary layer transition to delay separation or help to control the shed vorticity expected at low and moderate Reynolds numbers. However, at this stage, questions still remain as to whether this type of control in birds is achieved passively, actively, or a combination of both. Drawing inspiration from these observations, applications in drone models have demonstrated that highly flexible wings can help alleviate short-period oscillations generated by gusts [ 17 , 18 ] or delay flow separation [ 19 ] . On the other hand, the integration of active control mechanisms is also a promising avenue for realising these morphing capabilities. For instance, the use of Shape Memory Alloys (SMA) [ 20 , 21 , 22 ] and piezoelectric actuators [ 23 , 24 ] can offer precise, real-time adjustments to wing shape and surface properties, which has the potential to enhance aerodynamic forces and flight efficiency. However, their application is not without challenges, as the use of these mechanisms increases the manufacturing cost and constrains the operating temperature, among other drawbacks [ 25 ] . Figure 1: Schematic diagram of (a) the top view and (b) the cross-section of a bird wing. Figure adapted from [ 17 ] . (c) Bio-inspired flexible model for surface flexibility. Furthermore, to implement appropriate flow control techniques, it is essential to first understand the behaviour of the flow when subjected to the type of vibrations expected in nature. This encouraged us to investigate how a flexible surface alters the flow as a passive control mechanism when exposed to a streamwise gust or a surging-flow type of perturbation. The investigation was divided into two parts; first, the unsteady flow on a rigid wing was studied experimentally and numerically, and the second part dealt with the impact of introducing flexibility into the wing, as introduced in Figure 1 . Due to the complexity in developing a flexible-wing wind-tunnel model, this part was confined to a numerical approach. 2 Methods In this section, we present the experimental framework used to validate the numerical simulations for the rigid wing, along with the methodology for incorporating flexibility into the wing numerically. For the rigid-wing case, we also discuss the principal potential-flow theories applicable to the analysis of surging flows. 2.1

Read the complete text