Measuring the effective stress parameter using the multiphase lattice Boltzmann method and investigating the source of its hysteresis
Reihaneh Hosseini, Krishna Kumar · 2025
Read Measuring the effective stress parameter using the multiphase lattice Boltzmann method and investigating the source of its hysteresis by Reihaneh Hosseini, Krishna Kumar (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2501-00661.txt.
Introduction
Unsaturated soils need a stress parameter that links suction to strength, and Reihaneh Hosseini and Krishna Kumar measure it by simulation in work whose head is dated 2024. Lab tests have found varied links between the parameter and the degree of saturation, but they do not explain the shapes of those curves. Theory ties the parameter to the air-water interface area, which is hard to predict.
The team instead simulates how air and water sit in the pores of a synthetic three-dimensional soil column. A new algorithm reads the parameter from suction and surface tension forces on each grain. Over a full wetting and drying cycle, the parameter equals one at full saturation and zero when dry. Between those ends it stays above the saturation value.
Catalog record
| CREATOR | Reihaneh Hosseini, Krishna Kumar |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 55 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2501-00661
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Measuring the effective stress parameter using the multiphase lattice Boltzmann method and investigating the source of its hysteresis Reihaneh Hosseini, Krishna Kumar Abstract The effective stress parameter, χ \chi , is essential for calculating the effective stress in unsaturated soils. Experimental measurements have captured different relationships between χ \chi and the degree of saturation, S r S_{r} ; however, they have not been able to justify the particular shapes of the χ \chi - S r S_{r} curves. Theoretical solutions express χ \chi as a function of S r S_{r} and the air-water interfacial area, a w n a_{wn} ; however, a w n a_{wn} is difficult to predict, limiting further investigation of χ \chi variation. We seek an alternative approach for studying χ \chi by simulating the pore-scale distribution of the two fluid phases in unsaturated soils using the multiphase lattice Boltzmann method (LBM). We develop an algorithm for measuring χ \chi based on the suction and surface tension forces applied to each grain. Using this algorithm, we simulate the χ \chi - S r S_{r} curve over a full hydraulic cycle for a synthetic 3D granular soil column with immobile grains. We find that χ = 1 \chi=1 at S r = 1 S_{r}=1 and χ = 0 \chi=0 at S r = 0 S_{r}=0 , while χ > S r \chi>S_{r} for all other saturations. The maximum divergence of χ \chi from S r S_{r} happens at the transition from/to the pendular regime. We also observe that the χ \chi - S r S_{r} curve is hysteretic; χ \chi is larger during wetting (imbibition) compared to drying (drainage) due to larger contribution of surface tension forces. 1 1 footnotetext: This author is now affiliated with Virginia Tech, Blacksburg, Virginia, USA. Email: [email protected]. \KeyWords unsaturated soil, effective stress parameter, multiphase LBM, micro-mechanics 1 Introduction The concept of effective stress, \sigma^{\prime} , in saturated soils was first introduced by Terzaghi 1936 as the stress carried by the soil skeleton, calculated as \sigma^{\prime}=\sigma-u , where \sigma is the total stress and u is the pore pressure. Since then, \sigma^{\prime} has become the cornerstone of geotechnical engineering analysis of saturated soils. Later, Bishop 1959 proposed a modification to Terzaghi’s effective stress equation for unsaturated soils, \sigma^{\prime}=\sigma-u_{a}+\chi(u_{a}-u_{w}) , where u_{a} and u_{w} are pore air and pore water pressures and \chi is the effective stress parameter. Bishop’s equation describes the effective stress in unsaturated soil as the summation of the net normal stress, \sigma-u_{a} , and a contribution from the matric suction, u_{a}-u_{w} , where the extent of the contribution depends on the material variable \chi . To recover Terzaghi’s original effective stress, \chi should be zero for dry soil and one for fully saturated soil, but how \chi should vary between zero and one is unclear. During the early stages of developing the effective stress concept, researchers conducted experimental measurements of \chi Bishop and Donald (1961) ; Jennings and Burland (1962) ; Bishop and Blight (1963) . These measurements involved plotting \chi as a function of the degree of saturation, S_{r} . Although the experimental results generally showed a decreasing trend of \chi with decreasing S_{r} , no formulation was provided due to the variability in the curve’s shape. Later, Khalili and Khabbaz 1998 compiled a larger experimental data set and observed a linear trend for \chi when plotted against suction (in log scale) rather than S_{r} . They proposed a formulation for \chi as a function of suction and the air entry value based on the best fit to the data. They later noted that the same formulation could be used for the wetting path if the air entry value is replaced by the air expulsion value Khalili et al. (2004) and also provided a new formulation for the scanning curves Khalili and Zargarbashi (2010) . While these formulations have been useful for developing constitutive models Loret and Khalili (2002) , they are empirical in nature and do not offer insight into the factors influencing \chi . From a theoretical perspective, it is possible to derive \chi based on thermodynamic considerations. Using different thermodynamic approaches, researchers have derived \chi=S_{r} Hassanizadeh and Gray (1990) ; Hutter et al. (1999) . While \chi=S_{r} is a good estimate, it does not fully align with the experimental observations. Nikooee et al. 2013 suggested that the shortcoming of the previous thermodynamic approaches in estimating \chi were due to ignoring the interfacial effects in their formulation. Following the thermodynamic approach of Hassanizadeh and Gray 1990 , Nikooee et al. derived \chi as a function of both S_{r} and specific air-water interfacial area, a_{wn} , i.e., area per unit volume. Similarly, Likos 2014 revisited the \chi derived by Lu et al. 2010 and, rather than ignoring the interfacial affects as done in Lu et al., adopted the complete expression that included a_{wn} . These updated formulations for \chi require estimating a_{wn} at different saturations. Nikooee et al. used the a_{wn} formulation proposed by Joekar-Niasar et al. 2008 based on pore-network modeling and found the required coefficients by curve-fitting to experimental data. Likos formulated a_{wn} for an idealized unit pore with simple-cubic packing and integrated it based on the pores size distribution of the soil to find the a_{wn} for the entire soil matrix, assuming that the soil consists of a collection of these idealized pores with different sizes. Culligan et al 2004 measured a_{wn} experimentally using X-ray microtomography, but their data set was sparse and only for glass beads. Other experimental techniques for measuring a_{wn} , such as interfacial tracer and surfactant methods, are rather complicated to perform, and it is not always clear which interfaces have been measured Costanza-Robinson and Brusseau (2002) . Although theoretical approaches have provided greater insight into \chi , such as its dependence on both S_{r} and a_{wn} , the difficulty in accurately determining a_{wn} has limited the ability to study the variation in \chi under different conditions. Numerical modeling is an alternative to experimental or theoretical approaches for studying the effective stress and \chi in unsaturated soils. Particularly of interest is a numerical modeling technique that can simulate the distribution of different fluid phases inside the pore structure of unsaturated soils and provide information on interfacial areas, among other fluid phase distribution statistics. The multiphase lattice Boltzmann method (LBM) is a good candidate for such application Pan et al. (2004) ; Richefeu et al. (2016) ; Li et al. (2018) ; Hosseini et al. (2024) . Multiphase LBM has become a popular tool for studying multiphase flow through porous media Li et al. (2005) ; Ghassemi and Pak (2011) ; Hao and Cheng (2010) ; Zhang et al. (2016) as well as capillary and hydraulic behavior of unsaturated soils Porter et al. (2009) ; Galindo-Torres et al. (2013) ; Delenne et al. (2015) ; Li et al. (2018) . However, the application of LBM to studying the stresses unsaturated soils remains limited. Since multiphase LBM only simulates the fluid zone, rigorous measurement of stresses inside the soil skeleton would require coupling multiphase LBM with a numerical modeling technique for simulating the grain-grain interactions, such as the discrete element method (DEM) Cundall and Strack (1979) . However, for a simplified