Direct Comparison of Magnetic Penetration Depth in Kagome Superconductors AV 3 Sb 5 (A = Cs, K, Rb)

Austin R. Kaczmarek, Andrea Capa Salinas, Stephen D. Wilson, Katja C. Nowack · 2024

Read Direct Comparison of Magnetic Penetration Depth in Kagome Superconductors AV 3 Sb 5 (A = Cs, K, Rb) by Austin R. Kaczmarek, Andrea Capa Salinas, Stephen D. Wilson, Katja C. Nowack (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-19919.txt.

Introduction

Austin Kaczmarek, Andrea Capa Salinas, Stephen Wilson, and Katja Nowack compared three kagome superconductors head to head, in a 2024 paper. These crystals share a woven lattice pattern and a formula with a variable first element: cesium, potassium, or rubidium. The team measured how deeply magnetic fields penetrate each one as temperature changes. That depth reveals how the energy gap for electrons is shaped.

All three compounds showed a full gap, against reports of gapless points in two of them. A single uneven gap, or two even gaps, both fit the data well. The potassium and rubidium versions behaved more like each other than like the cesium one. The authors link that split to differences in the normal-state band layout of the family.

Catalog record

CREATORAustin R. Kaczmarek, Andrea Capa Salinas, Stephen D. Wilson, Katja C. Nowack
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-19919

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Direct Comparison of Magnetic Penetration Depth in Kagome Superconductors AV 3 Sb 5 (A = Cs, K, Rb) Austin R. Kaczmarek, Andrea Capa Salinas, Stephen D. Wilson, Katja C. Nowack Abstract We report measurements of the local temperature-dependent penetration depth, λ ⁡ ( T ) \lambda(T) , in the Kagome superconductors AV 3 Sb 5 (A = Cs, K, Rb) using scanning superconducting quantum interference device (SQUID) microscopy. Our results suggest that the superconducting order in all three compounds is fully gapped, in contrast to reports of nodal superconductivity in KV 3 Sb 5 and RbV 3 Sb 5 . Analysis of the temperature-dependent superfluid density, ρ s ​ ( T ) \rho_{s}(T) , shows deviations from the behavior expected for a single isotropic gap, but the data are well described by models incorporating either a single anisotropic gap or two isotropic gaps. Notably, the temperature dependences of λ ⁡ ( T ) \lambda(T) and ρ s ​ ( T ) \rho_{s}(T) in KV 3 Sb 5 and RbV 3 Sb 5 are qualitatively more similar to each other than to CsV 3 Sb 5 , consistent with the superconducting phase reflecting features of the normal-state band structure. Our findings provide a direct comparison of the superconducting properties across the AV 3 Sb 5 family. The Kagome lattice, formed by corner-sharing triangles, leads to geometric frustration, making insulating Kagome materials candidates for exotic magnetic states such as quantum spin liquids [ 1 , 2 ] . In metallic Kagome materials, this lattice motif gives rise to remarkable electronic phenomena such as Dirac points, van Hove singularities, and flat bands, which can result in topologically nontrivial and strongly correlated states of matter. The recently discovered vanadium-based Kagome metals AV 3 Sb 5 (A = Cs, K, Rb) feature alternating V 3 Sb 5 Kagome sheets separated by layers of alkali metal ions, which donate electrons to the Kagome layers [ 3 , 4 , 5 ] . These materials exhibit similar band structures near the Fermi level with multiple Fermi surfaces, dominated by vanadium d-orbitals, and host rich phase diagrams with a charge-density wave (CDW) phase featuring giant anomalous Hall effects, nematicity, and time-reversal symmetry breaking, and superconductivity emerging at low temperatures [ 6 , 7 , 8 , 9 , 10 , 11 , 6 , 13 , 14 , 15 , 16 ] . A key question is clarifying the symmetry of the superconducting order parameter and its relationship with the CDW phase. Despite their structural and electronic similarities, the three AV 3 Sb 5 compounds display subtle yet significant differences. The CDW distortions CsV 3 Sb 5 differ from those in KV 3 Sb 5 and RbV 3 Sb 5 , likely resulting from subtle differences in the ordering of Van Hove singularities near the Fermi level, which are caused by slightly different lattice constants in CsV 3 Sb 5 compared to KV 3 Sb 5 and RbV 3 Sb 5 [ 17 , 18 ] . In addition, the phase diagram including the CDW phase and superconductivity as a function of pressure and doping in CsV 3 Sb 5 differs from that of the other two compounds [ 19 , 16 ] . These distinctions raise the question of how similar the superconducting phases are across the AV 3 Sb 5 compounds and whether they exhibit different superconducting gap structures. The temperature dependence of the superconducting penetration depth, \lambda(T) , is sensitive to the magnitude of the superconducting gap, \Delta(\textbf{k}) , and can reveal the presence of nodes [ 12 ] . By determining whether nodes are present in the gap, the possible pairing symmetry can be constrained. The temperature dependence of the penetration depth in CsV 3 Sb 5 has been probed using a variety of techniques, including tunnel-diode oscillator, \mu SR, critical field measurements, and critical current measurements [ 2 , 4 , 3 , 10 , 9 , 5 , 7 , 28 , 8 ] . These studies consistently suggest that the superconducting order parameter in CsV 3 Sb 5 is fully gapped across the Fermi surface. The number of studies of \lambda(T) in KV 3 Sb 5 and RbV 3 Sb 5 is more limited, and existing studies yield partially conflicting results. Measurements in KV 3 Sb 5 and RbV 3 Sb 5 using \mu SR suggested the presence of nodes in KV 3 Sb 5 and RbV 3 Sb 5 at ambient pressure [ 6 ] . However, point-contact spectroscopy on KV 3 Sb 5 and CsV 3 Sb 5 indicated a fully gapped superconducting state in both [ 30 ] . To resolve these ambiguities and gain deeper insights into the superconducting phase in the AV 3 Sb 5 family, we report a direct, side-by-side comparison of the penetration depth measured by a consistent experimental approach across the compounds. Specifically, we use scanning superconducting quantum interference device (SQUID) susceptometry to systematically measure the temperature-dependent penetration depth for each of the Kagome superconductors AV 3 Sb 5 (A = Cs, K, Rb). Figure 1 : (a) Schematic of the SQUID pickup loop with concentric field coil above the sample. An AC current through the field coil generates a local magnetic field, which is screened by currents in the superconductor. This alters the magnetic flux in the pick-up loop, detected as a change in mutual inductance between the two coils. (b) Temperature dependence of the change in mutual inductance, \Delta M(T) , at a fixed SQUID-sample distance z=z^{*} . \Delta M(T) is normalized by its lowest temperature value for each curve. \Delta M(T) remains zero for T>T_{c} and decreases sharply at T_{c}=2.33 K, 0.89 K, 0.74 K for CsV 3 Sb 5 , KV 3 Sb 5 , and RbV 3 Sb 5 respectively. (c) Spatial maps of \Delta M on different samples as labeled. Our SQUID susceptometer consists of two concentric coils: an inner pickup loop which is connected to the SQUID circuit to detect magnetic flux, and an outer field coil, through which an AC current is applied to generate a local magnetic field at the sample [ 1 ] . The two coils are few \mu m in dimensions and we achieve a spatial resolution of \sim 2-3 \mu m (See Supp. Sec. for details). When the SQUID is far from the sample, the mutual inductance between these two coils, M_{0} , is measured. As the SQUID approaches a superconducting sample, screening currents in the superconductor reduce the local magnetic field produced by the field coil (Fig. 1 (a)) and, consequently, results in a decrease in the mutual inductance, \Delta M . \Delta M at a distance z between the SQUID and the sample can be modeled by [ 32 ] : \centering{\frac{\Delta M(z,T)}{M_{0}}=-\frac{1}{(1+\frac{4}{a^{2}}(z+\lambda(T))^{2})^{3/2}}}\@add@centering (1) where a is the effective field coil radius, and \lambda is assumed much smaller than the thickness of the sample. We use a Helmholtz coil to compensate for small out-of-plane background magnetic fields (see Supp. Sec. for details). Fig. 1 (b) shows \Delta M as a function of temperature, normalized by its value at the lowest temperature to allow comparison across different measurements. Measurements were taken with the SQUID in light mechanical contact to

Read the complete text