From Ceilings to Walls: Universal Dynamic Perching of Small Aerial Robots on Surfaces with Variable Orientations
Bryan Habas, Aaron Brown, Donghyeon Lee, Mitchell Goldman, Bo Cheng, IEEE, Member · 2024
Read From Ceilings to Walls: Universal Dynamic Perching of Small Aerial Robots on Surfaces with Variable Orientations by Bryan Habas, Aaron Brown, Donghyeon Lee, Mitchell Goldman, Bo Cheng, IEEE, Member (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-19765.txt.
Introduction
Bryan Habas and co-authors teach small drones in 2024 to perch on anything from ceilings to walls, at speed. Sticking a landing on a tilted surface is a dynamic stunt, not a hover. Their approach strips units away so one rule set spans sizes, then trains the skill by deep reward learning in simulation.
Keeping the same proportions across sizes gave matching stunt behavior in sim and in real flights, they report. Leg spring stiffness barely mattered; leg damping shaped success on head-on approaches. A speed floor for sticking emerged, set by how hard the drone can maneuver and how its legs are shaped. Perching drones that can land anywhere can rest, watch, and save battery in wild places.
Catalog record
| CREATOR | Bryan Habas, Aaron Brown, Donghyeon Lee, Mitchell Goldman, Bo Cheng, IEEE, Member |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 30 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-19765
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
From Ceilings to Walls: Universal Dynamic Perching of Small Aerial Robots on Surfaces with Variable Orientations Bryan Habas, Aaron Brown, Donghyeon Lee, Mitchell Goldman, Bo Cheng, IEEE, Member Abstract This work demonstrates universal dynamic perching capabilities for quadrotors of various sizes and on surfaces with different orientations. By employing a non-dimensionalization framework and deep reinforcement learning, we systematically assessed how robot size and surface orientation affect landing capabilities. We hypothesized that maintaining geometric proportions across different robot scales ensures consistent perching behavior, which was validated in both simulation and experimental tests. Additionally, we investigated the effects of joint stiffness and damping in the landing gear on perching behaviors and performance. While joint stiffness had minimal impact, joint damping ratios influenced landing success under vertical approaching conditions. The study also identified a critical velocity threshold necessary for successful perching, determined by the robot’s maneuverability and leg geometry. Overall, this research advances robotic perching capabilities, offering insights into the role of mechanical design and scaling effects, and lays the groundwork for future drone autonomy and operational efficiency in unstructured environments. SUPPLEMENTARY MATERIAL Video: https://youtu.be/llRTp3dR5DE I Introduction Dynamic perching is a routine feat achieved by a diverse array of biological fliers [ 1 , 2 , 3 , 4 , 5 ] . These fliers are often capable of robust perching on surfaces regardless of orientation, allowing them to land in unstructured environments to scout territory, evade predators, or rest. In recent years, perching has emerged as a key area of interest in aerial robotics, crucial for not merely emulating nature, but for enhancing robot autonomy in unstructured settings [ 6 ] . Perching enables flying robots to perform tasks such as visual inspection [ 7 , 8 ] , surveillance [ 9 , 10 ] , and reconnaissance more efficiently, eliminating the need for sustained flight. Presently, battery constraints limit these robots to the life of tens of minutes of active operation [ 11 ] , underscoring the value of perching in extending operational life by reducing unnecessary energy expenditure. This is particularly relevant in urban landscapes abundant with perching opportunities such as walls, ledges, and ceilings, where robots can execute more diverse tasks, from passive monitoring to serving as communication relays in emergency environments [ 12 ] . Previous work by the authors have demonstrated that a highly maneuverable nano-scale quadrotor, approximately 3.25” in diameter, can successfully land on inverted surfaces (i.e., ceilings) [ 13 , 14 , 15 ] , while also exploring the effects of leg geometry on inverted landing capabilities in similarly sized quadrotors [ 15 ] . This was achieved using either a two-stage machine learning framework (combining supervised and unsupervised learning) [ 15 ] or a deep reinforcement learning framework [ 14 ] . However, several key questions remain to be addressed: 1) How do landing surface orientations affect perching capabilities and can we extend our previous learning frameworks to achieve universal perching capabilities on surfaces of variable orientations (i.e., omnidirectional landing)? 2) How do system maneuverability, leg geometry, and material properties such as hinge stiffness and damping influence landings? Additionally, how do these factors scale across varying robot sizes? Fig. 1: (a) Image capturing the body-swing stage of a quadrotor during an inverted landing in an experimental test. (b) Corresponding simulation image at the same point in time. (c) Schematic of the dynamic perching policy network. (d) Visual depiction of the dynamic perching sequence, illustrating the progression from flight, through the triggering ( a_{Trg} ) and rotational action ( a_{Rot} ), to the body-swing and final landing stage. Works such as Thomas et. al [ 16 ] and Mao et. al [ 17 ] have developed methods for landing quadrotor systems successfully onto inclined surfaces. These methods rely heavily on generating full-state trajectories that align the robot almost perfectly parallel to the landing surface upon impact, while placing less emphasis on how factors such as system geometry, perching dynamics, or robot maneuverability contribute to landing success. As these factors were implicitly accounted for and embedded within the trajectory constraints. Additionally, most research has focused on rigid landing gear attachments [ 18 , 19 , 20 ] , with few exploring how passive flexibility contributes to landing success [ 21 , 22 ] . Therefore, the purpose of this work is to further the investigation of how robot (landing gear) geometry, mechanical properties and maneuverability affects landing capabilities across different robot sizes and landing surface orientations, while aiming at achieving universal dynamic perching capabilities. To this goal, this study expanded the framework developed by the author’s previous work for performing Deep Reinforcement Learning (DeepRL) to explore the landing capabilities of a nano-scale quadrotor robot [ 14 ] , and using simulation with experimental validation through zero-shot Sim-to-Real transfer of the trained policy (Figure 1 a,b). The rest of the paper is organized as followed. Section II provides a description of our methodology and expansion of our Deep Reinforcement Learning Policy framework to universal dynamic perching. Section III details the experimental validation for the efficacy of our simulation trained landing policies and simulation behaviors on physical robot systems as well as the results of our study. Section IV then concludes the study and provides direction for future work. II Methodology II-A Non-Dimensionalization of System Geometry Quadrotor systems across different scales and manufacturers often exhibit variations in their geometric proportions. To generalize robotic landing capabilities across these diverse systems, we developed a framework to non-dimensionalize the geometric relationship between a robot’s leg configuration and body dimensions. This framework projects the system’s geometry onto the robot’s X-Z plane (Figure 2 a) and defines a set of key dimensionless parameters. The Forward Reach ( F_{Reach} ) is defined as the maximum distance from the system’s vertical axis to the furthest point of the drone’s body, typically represented by the propellers or prop-guards. The effective leg length ( L_{eff} ) is defined as the distance from the robot’s origin to the tip of the leg’s attachment pad, projected onto the X-Z plane. The ratio of these values ( F_{Reach}/L_{eff} ), along with the angle ( \gamma ) between the vertical axis and the projected leg length, defines a set of unique dimensionless parameters for scaling across different drone sizes, as shown in Figure 2 b. Assuming similar angular acceleration, we hypothesized that systems with identical dimensionless values exhibit comparable landing capabilities. To test this hypothesis, we designed, built, and modeled two custom drone systems of different sizes and landing gear designs (Table I ). Fig. 2: (a) Depiction of X-Z plane system geometry is projected onto. (b) Source One and Impulse Micro quadrotors with non-dimensionalized Semi-Narrow Short leg configuration TABLE I: Leg Design Configurations (Non-Dimensionalized) Quadrotor Frame Leg Config Length Ratio: L_{eff}/F_{Reach} Leg Angle: \gamma (deg) Source One V5 Wide-Long 1.49 52.4^{\circ} ( 12” Diameter ) Semi Narrow-Short 1.08 27.3^{\circ} Impulse Micro Wide-Long 1.47 53.1^{\circ} ( 7” Diameter ) Semi Narrow-Short 1.18 29.5^{\circ} II-B Multi-Surface Landing Policy Formulation To generalize the Reinforcement Learning framework established by Habas et al. [ 14 ] to landing on surfaces with arbitrary orientations beyond inverted, we augmented the input state vector of the policy network. It now consists of the following: \left[\tau,\vartheta_{x},D_{\perp},\theta_{plane}\right] , which represent