Fundamental Limits on Fiber-Based Electron Acceleration — and How to Overcome Them
Aku Antikainen, Siddharth Ramachandran · 2024
Read Fundamental Limits on Fiber-Based Electron Acceleration — and How to Overcome Them by Aku Antikainen, Siddharth Ramachandran (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-19045.txt.
Introduction
Aku Antikainen and Siddharth Ramachandran find a hard limit on fiber-based particle accelerators in this 2024 paper. The idea is to push electrons with a light pulse inside a hollow fiber. The pulse must carry a lengthwise electric field and travel at light speed.
The pair derive a formula for the wavelength where the key mode hits that speed. Meeting a second need, matched group speed, demands a material with extreme dispersion. Such material would absorb so much light that the accelerator would be useless. They then propose a way around the wall. The paper maps both the limit and an escape route.
Catalog record
| CREATOR | Aku Antikainen, Siddharth Ramachandran |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 47 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-19045
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Fundamental Limits on Fiber-Based Electron Acceleration — and How to Overcome Them Aku Antikainen, Siddharth Ramachandran Abstract To accelerate ultra-relativistic charged particles, such as electrons, using an electromagnetic pulse along a hollow-core waveguide, the pulse needs to have a longitudinal electric field component and a phase velocity of c c , the speed of light in vacuum. We derive an approximate closed-form expression for the wavelength at which the phase velocity of the TM 01 mode in a metal-clad hollow-core fiber with a dielectric layer is c c . The expression is then used to derive conditions for material dispersion required of the dielectric in order to simultaneously have c c phase and group velocity. It is shown that the dispersion would need to be so heavily anomalous that the losses in the anomalously dispersive regime would render such a particle accelerator useless. We then propose the utilization of gain in the form of two spectral peaks in the dielectric to circumvent the otherwise fundamental limits and allow for TM 01 pulses with c c phase and group velocity and thus arbitrary length-scaling of fiber-based electron accelerators. In theory, the group velocity dispersion could also be made zero with further gain-assisted dispersion engineering, allowing for the co-propagation of dispersionless electromagnetic pulses with relativistic particles. Journal: opticajournal 1 Introduction Free electron lasers, particle colliders, electron microscopy, medical imaging and therapy, and X-ray science would all benefit tremendously from compact, cost-effective electron accelerators. Conventional radio frequency accelerators require high average powers and long pulses, and are limited to accelerating gradients in the 10 MeV / m range. Near-infrared (NIR) sources based on chirped pulse amplification can achieve accelerating gradients that are larger by several orders of magnitude, but they inherently suffer from small electron bunch size and other issues related to the short wavelengths and the associated sensitivity to timing. In a lot of respects, THz radiation offers a promising compromise, combining high accelerating gradients, longer wavelengths compared to NIR, and short pulses, leading to better energy-efficiency [ 1 , 2 , 3 ] . In particular, TM-polarized few-cycle THz pulses in hollow-core waveguides have been demonstrated to be a viable platform for relativistic electron acceleration [ 4 , 5 ] . The use of TM-modes for electron acceleration is based on these modes having an electric field component in the direction of propagation [ 6 ] . Hollow-core waveguides have the benefit of preventing diffraction of the accelerating pulse, leading to larger acceleration gradients due to the confinement of the beam. Even though stable propagation of TM-modes over long distances in optical fibers has been demonstrated [ 7 ] , the electron acceleration studies of [ 4 , 5 ] limited themselves to modest waveguide lengths of a couple of centimeters. The reason for this is that the group velocity of the THz pulse is vastly different from the velocity of the relativistic electrons, causing walk-off between the pulse and the electrons over the centimeter length scale. Relativistic electron acceleration in hollow-core fibers will not benefit from longer fibers unless both the phase and group velocity of the pulse performing the acceleration can simultaneously be made equal to c , the speed of light in vacuum. Here we show that simultaneously having c phase and group velocity for a TM-mode in a hollow core fiber requires the use of materials with heavy anomalous dispersion as part of the fiber design, and an analytical dispersion condition is derived. Such heavy anomalous dispersion can (due to Kramers-Kronig relations) only occur in a spectral region where losses increase or where gain decreases . We thus propose using a gain element as part of the fiber to induce the necessary anomalous dispersion, allowing for a fiber design with c phase and group velocity for a TM mode. Such a fiber makes it possible to arbitrarily scale the length of the electron accelerator and hence the use of temporally longer, less intense accelerator pulses that also experience gain upon propagation. The dimensions of the fiber design proposed here correspond to an operating wavelength in the THz regime, but the results are wavelength-agnostic due to the scale-invarience of Maxwell’s equations and apply to all operating wavelengths, THz and NIR alike. 2 Linear Hollow-Core Accelerators Any waveguide designed for electron acceleration needs to have a vacuum core. A hollow-core fiber with nothing but dielectric layers surrounding the vacuum core has the property that the phase velocity of every mode is always faster than the speed of light [ 8 ] , creating an obvious issue for acceleration of massive particles, such as electrons. Note that "mode" here means the Bragg modes that have significant optical power in the vacuum core, not the (non-lossy) cladding modes confined in the dielectric layers. By enclosing the waveguide in an outer metal cladding, the phase velocity at a specific wavelength for a certain TM mode can be made to coincide with the speed of light in vacuum. This is the operating wavelength of the relativistic electron accelerator, in which the electrons can be assumed to move at the speed of light. An illustration of the structure of such a (rotationally symmetric, circular) waveguide is shown in Fig. 1 . Figure 1: A hollow-core fiber consisting of three dielectric layers and the metal cladding. The electric field profiles of the TM 01 (top) and TM 02 (bottom) modes at the wavelength for which the phase velocity is equal to c are shown. The plots show the two quantities related to the electric field that are continuous across the dielectric interfaces: the longitudinal electric field component E_{z} (blue lines), and the radial field component times the square of the local refractive index n^{2}E_{r} (red lines). The functional forms of the field profiles in each layer l have been indicated. The operating wavelength \lambda_{\text{op}} of the fiber for any given TM mode can be determined from the condition that the phase velocity v_{p}(\lambda_{\text{op}})=c at that wavelength. A TM mode has no longitudinal magnetic field component, and every field component of the mode can be directly determined from the longitudinal electric field component E_{z} . The functional form of E_{z} in each layer l is known (from Maxwell’s equations) to be a linear combination of the two Bessel functions: E_{z}^{l}(r)=A_{l}J_{0}(p_{l}r)+B_{l}Y_{0}(p_{l}r), (1) where p_{l}=k_{0}\sqrt{n_{l}^{2}-n_{\text{eff}}^{2}} , k_{0}=2\pi/\lambda_{0} is the vacuum wavenumber, n_{l} is the refractive index of the dielectric layer l , and n_{\text{eff}} is the effective index of the mode ( n_{\text{eff}}=1 for v_{p}=c ). The mode is determined by the following boundary conditions: 1. The energy of the mode must be finite (i.e. there can be no field singularities), 2. The longitudinal electric field E_{z}(r) must be continuous from one dielectric layer to another, 3. The radial field times the local refractive index squared, n(r)^{2}E_{r}(r) , must be continuous from one dielectric layer to another, and 4. the longitudinal field E_{z}(r) has to be zero at the metal, as metals can be well approximated as perfect conductors at NIR and THz wavelengths [ 9 ] . In the vacuum core we have B_{1}=0 to avoid a singularity of Y_{0}(p_{1}r) at r=0 , and the longitudinal electric field of any TM mode is given by A_{1}J_{0}(p_{1}r) ,