Efficient broadband antenna for a quantum emitter working at telecommunication wavelengths Journal: opticajournal
Monika Dziubelski, Joanna M Zajac · 2024
Read Efficient broadband antenna for a quantum emitter working at telecommunication wavelengths Journal: opticajournal by Monika Dziubelski, Joanna M Zajac (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-18472.txt.
Introduction
Monika Dziubelski and Joanna Zajac design a broadband antenna that helps single photons escape from a quantum dot at telecom wavelengths. Their 2024 paper serves quantum networks, which need single photons that can ride standard fiber lines. The best photon sources, dots of III-V material, shine in the near-infrared, short of the O- and S-bands that fiber systems favor.
The pair model an antenna shaped for the O-band. It draws out photons with high extraction efficiency while keeping the emission boost, the Purcell factor, modest at about two. Far-field checks confirm the light leaves in a clean Gaussian beam, the shape fiber systems accept. The design is offered as a building block for quantum repeaters. Such repeaters will stitch long quantum links together.
Catalog record
| CREATOR | Monika Dziubelski, Joanna M Zajac |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 10 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-18472
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Efficient broadband antenna for a quantum emitter working at telecommunication wavelengths Journal: opticajournal Monika Dziubelski, Joanna M Zajac Abstract Single photons are resources needed for developing quantum networks QN. They distribute quantum information services across commercial optical fiber links and are key ingredient in developing quantum repeaters architectures. Currently, the most robust quantum light sources are Quantum Dots made of III-V materials. They emit highly indistinguishable photons on-demand and with high efficiency. Established devices work at near-infrared wavelengths (NIR) and further research is needed to develop devices working in telecommunication wavelengths O- and S-bands. In this contribution, we propose and model a broadband optical antenna working in O-band. It exhibits high extraction efficiencies with small Purcell enhancement around 2. We also examine far field emission from these structures, ensuring Gaussian mode profile is observed. 1 Introduction Efficient light extraction from quantum emitters and increased light-matter interaction is crucial for developing robust optical links, which are fundamental building blocks of long distance quantum networks [ 1 , 2 ] . There had been extensive research on this subject dedicated to QDs working in the near-infra-red (NIR) spectral range. One of the approaches reported are solid-immersion lenses (SIL) or its derivatives micro-SIL and super-spheres. These SILs act as optical antennas by increasing coupling between emitter and light field, which relies on increasing the acceptance angle of radiation into an objective and thus numerical aperture (NA). In the past, high light extraction efficiencies of SILs and \mu SILs had been demonstrated for NIR III-V QDs [ 3 , 4 ] , NV-centers in diamond [ 5 ] and other material systems [ 6 ] . In order to further improve light extraction efficiency more complex cavity structures had been used. These include \mu SILs used as a top mirror and metal layers used as a bottom mirror [ 3 ] . Moreover, using designs with \mu SIL, as compared to macroscopic SIL, had been demonstrated in the past to suppress leaky modes. Recently, there had been reports on adapting different types of microcavity designs into telecom wavelengths exploiting Distributed Bragg Reflectors (DBRs) at 1.3 \mu m [ 7 , 8 ] . In this Letter, we have been investigating two designs; the first one consists of \mu SIL and Au bottom membrane with QD in the center of the SIL and the second one of super- \mu SIL and Au membrane. Both of these designs are optimized for 1.3 \mu m. 2 Design and Methodology Firstly, we consider InAs QDs in the center of hemisphere made of InAlGaAs quaternary alloy. Radius of the \mu SIL is defined as R=r\cdot n/1350\,nm where n is refractive index. Low temperature refractive index is estimated as n=3.2 [ 9 ] . Dimension of the semiconductor membrane is h=311 nm. At the bottom of the structure, we place Au layer d=200 nm. This layer acts as both bottom mirror and contact for the Shottky diode. Au has negligible absorption at these wavelengths while we chose this thickness to limits leaky-modes. Second design is a super-sphere with characteristic dimension a+r=(1+\frac{1}{n}) , where a is the distance from the top layer to the center of the super sphere, r is the radius of the sphere, and n is the refractive index. The simulation was carried out using Ansys Lumerical FDTD solver where we scan the radius for fixed wavelength ranges between 1200 and 1500 nm in order to find cavity-modes. We used perfectly matched layer (PML) boundary condition to truncate the FDTD simulation region, which has dimensions 10 x 10 x 4 \mu m Figure 1: In a) top row, layout of \mu SIL device with QD in the center and Au layer underneath. In the bottom row, field distribution within the \mu SIL structure. In b) top row, the same but for super- \mu SIL. In the bottom row, field distribution within the super- \mu SIL. in the x, y, and z directions, respectively. We use power monitor in z-direction to obtain transmission power flux for the structure. We extract \eta_{ex} - photon extraction efficiencies which are directly proportional to transmissions normalized to source powers, F_{p} - Purcell enhancement and \eta_{ph} , where \eta_{ph} = \eta_{ex}\cdot F_{p} . Moreover, we extract far-field profiles of electric fields. Far field distributions were found by projecting data from a frequency-domain profile and power monitor to the far field using Lumerical script function farfield3d, which returns electric field intensity |E| 2 projected onto a hemisphere. For each mode, a 10x10 \mu m 2-dimensional z-normal monitor was placed above the SIL and electric field data was collected. Finally, the relationship between transmission and the numerical aperture (NA) of the monitor for several R values was found by integrating the far field projection over a cone for a range of half-angles between 0- 90^{\circ} . The fraction of far field integrated for each angle was then multiplied by the Purcell factor to obtain \eta_{ph} for this mode. Finally, parameters had been collected into a table to compare performance of these two designs. Device layout is shown in Fig. 2 3 Results Figure 2: a) transmission maps vs radius (R) and wavelength (nm), b) Transmission cross-sections for fixed radius as a function of wavelength, c) far-field mode profiles for hemisphere based design. In the Fig. 2 a), we are showing transmission maps as a function of radius and wavelength of the cavity for the case of a cavity wit hemisphere design. For these modes, we select a cross-section along the 1350 nm central wavelength of interest and further plotting these cross=section in the Fig. 2 b). These data are showing broadband transmission with fitted FWHM vales between 15 and 45 nm as given in Tab. 1 . Finally, far field profiles are given in Fig. 2 c) where the Gaussian modes identified for R_{H} = 1.8 and R_{H} = 3.7. Figure 3: Top, transmission, \eta_{ex} , bottom, Purcell enhanced transmission for hemisphere based structure, \eta_{ph} . For more details compare text. In the Fig. 3 we are showing extraction efficiencies, \eta_{ex} , and Purcell enhanced extraction efficiency, \eta_{ph} . We identify two modes, for R_{H} = 1.8 and R_{H} =3.7, the earlier has higher \eta_{ph} . Figure 4: a) transmission maps vs radius (R) and wavelength (nm), b) Transmission cross-sections for fixed radius as a function of wavelength, c) far-field mode profiles for hemisphere based design. In the Fig. 2 a), we show transmission maps as a function of radius and wavelength of the cavity for the case of a cavity wit hemisphere top mirror. For these modes, we preselect cross-section along the 1350 nm central wavelength of interest and plot them in the Fig. 2 b). These data are showing broadband transmission with averaged FWHM as fitted with Gaussian fit function of around 30 nm as given in Tab. 1 . Finally, far field profiles are given in Fig. 2 c) with the most Gaussian modes identified for R_{H} = 3 and R_{H} = 3.5. In the Fig. 3 we are showing extraction efficiencies, \eta_{ex} at the top, and Purcell enhanced extraction efficiencies at the bottom, \eta_{ph} . In Fig. 4 we show in a) transmission maps, b) transmission cross-sections and c) far-field profiles for