Amplifier scheme: driven by indirect-drive under ∼ \sim 10 MJ laser toward inertial fusion energy

Yongsheng Li(ÀîÓÀÉý), Ke Lan (À¶¿É), Hui Cao (²Ü»Ô), Yao-Hua Chen (³ÂÒ«èë), Xiaohui Zhao (ÕÔÏþêÍ), Zhan Sui (ËåÕ¹) · 2024

Read Amplifier scheme: driven by indirect-drive under ∼ \sim 10 MJ laser toward inertial fusion energy by Yongsheng Li(ÀîÓÀÉý), Ke Lan (À¶¿É), Hui Cao (²Ü»Ô), Yao-Hua Chen (³ÂÒ«èë), Xiaohui Zhao (ÕÔÏþêÍ), Zhan Sui (ËåÕ¹) (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-18455.txt.

Introduction

Fusion power from laser-driven capsules needs the fuel to burn efficiently, and in the standard central ignition scheme less than thirty percent of the fuel usually burns. Li and co-authors propose an amplifier scheme that stacks two cascading explosions to raise that share. Their design leans on a planned ten megajoule laser and on the way higher fuel density speeds the reaction rate.

The paper gives a one-dimensional design for an indirect-drive version. A capsule with 2.02 milligrams of deuterium-tritium fuel sits inside a spherical hohlraum, driven by the laser's radiation. In the simulation, the capsule burned forty-eight percent of its fuel and reached a gain of thirty-three at a modest convergence ratio of twenty-four. The authors argue that high burn at low convergence eases the harsh demands that high-gain fusion places on ignition and on engineering.

Catalog record

CREATORYongsheng Li(ÀîÓÀÉý), Ke Lan (À¶¿É), Hui Cao (²Ü»Ô), Yao-Hua Chen (³ÂÒ«èë), Xiaohui Zhao (ÕÔÏþêÍ), Zhan Sui (ËåÕ¹)
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-18455

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Amplifier scheme: driven by indirect-drive under ∼ \sim 10 MJ laser toward inertial fusion energy Yongsheng Li(ÀîÓÀÉý), Ke Lan (À¶¿É), Hui Cao (²Ü»Ô), Yao-Hua Chen (³ÂÒ«èë), Xiaohui Zhao (ÕÔÏþêÍ), Zhan Sui (ËåÕ¹) Abstract Burn efficiency Φ \Phi is a key for commercial feasibility of fusion power station for inertial fusion energy, while Φ \Phi is usually lower than 30 % \% in the central ignition scheme of inertial confinement fusion (ICF). A recent conceptual design for a 10 MJ laser driver [Z. Sui and K. Lan et al., Matter Radiat. Extremes 9 , 043002 (2024)] provides a new room for target design to achieve a higher Φ \Phi . Here, we take the advantage of fuel density in reaction rate and propose a novel amplifier scheme for increasing Φ \Phi via two cascading explosions by ICF. The amplifier scheme can be realized either by indirect-drive or by direct-drive. Here, we give a 1D design for an indirect-driven amplifier capsule containing 2.02 mg DT fuel under a 300 eV radiation generated by a 10 MJ and 1785 TW laser inside an octahedral spherical hohlraum. At stagnation, it forms an extremely dense shell surrounding central hot fuel, with a density ratio of shell to central > > 20. About 53 ps after stagnation, benefiting from the extremely high density of the shell and the deposition of α \alpha particles generated in the central hot fuel, the primary explosion happens in the shell. Then, the primary explosion in shell drives the central fuel to converge spherically towards the center. At about 18 ps after the primary explosion, the central fuel converges at center with 1100 g/cm 3 , 770 keV and 320 Tbar, leading to the secondary explosion inside this extremely hot and dense fireball. As a result, the amplifier capsule has Φ \Phi = 48 % \% and G = 33 at convergence ratio C r C_{r} = 24. This novel scheme can achieve a relatively high burn efficiency at a relatively low C r C_{r} , which can greatly relax the stringent requirements of high gain fusion on hot spot ignition conditions and engineering issues. pacs 52.57.Fg, 52.35.Py, 52.38.Mf Fusion has the potential to provide a reliable, limitless, safe, and clean energy source MTV ; IFEneedsreport , and the successful achievement of ignition for indirect-drive inertial confinement fusion (ICF) Abu-Shawareb2024PRL ; Hurricane2024PRL ; Rubery2024PRL ; Pak2024PRE at the National Ignition Facility (NIF) Lindl1995POP ; Maclaren2014PRL ; Betti2016NP ; Campbell2017MRE makes the inertial fusion energy (IFE) a highly promising approach. However, the target gain G required by IFE, defined as the ratio of fusion energy output to laser energy on target, is estimated to be 30 - 100 to achieve attractive economic performance MTV , much higher than the currently recorded highest G \sim 2.4 on the NIF 5.2MJ . Driven by laser energy E_{d} , G of fuel with mass m_{fuel} can be expressed as: \displaystyle G=\Phi\times Q\times m_{fuel}/E_{d}. (1) Here, Q is the released energy by a nuclear reaction per unit mass and \Phi is burn efficiency. Usually, \Phi is smaller than 30\% in the central ignition scheme of ICF. Obviously, \Phi is a key to increase G at given m_{fuel} and E_{d} . An equal molar mixture of deuterium and tritium (indicated as symbols D and T, respectively) considered in the majority of present fusion research has the most important reaction D + T \rightarrow \alpha (3.52 MeV) + n (14.1 MeV) for fusion research due to their largest fusion cross-section. As known, DT reactivity is \propto T_{i}^{2} in the range of 8 - 25 keV, here T_{i} is ion temperature. Thus, the fusion is ignited in the hot central fuel in the central ignition scheme MTV . On the other hand, we have the volumetric reaction rate of DT as \displaystyle R_{\texttt{DT}}\propto\frac{\rho^{2}}{\bar{m}^{2}}<\sigma v>, (2) where \rho is mass density, \bar{m} is the average nuclear mass, <\sigma v> is averaged reactivity. It shows a very important feature for fusion energy research: R_{\texttt{DT}}\propto \rho^{2} , or the reaction rate per unit mass is proportional to \rho , indicating the role of \rho of the fuel in achieving efficient release of fusion energy and high burn efficiency MTV . Figure 1: (Color online) Artistic representations of the target chamber in octahedral configuration (a), octahedral spherical hohlraum (b), spherical CH capsule that contains DT fuel (c), and laser pulse (red) and radiation drive (blue)(d). A recent conceptual design 10MJ for a 10 MJ laser driver provides a new room for novel target designs for IFE. In this paper, we will take above advantage of \rho and propose a novel amplifier scheme to increase the burn efficiency via two cascading explosions at a relatively low convergence ratio under 10 MJ laser. In contrast to the central ignition scheme with only one explosion in the central hot fuel, our novel scheme requires an extremely dense shell to be formed at stagnation, and in return, it has two explosions, with the primary one happening in the extremely dense shell and the secondary one happening in an extremely hot and dense central dense fuel generated by the primary one. This amplifier scheme can be realized either by direct-drive or by indirect-drive. A direct-driven amplifier design is given in our separate paper Lan2024POP . Here, we present an indirect-driven amplifier design with a spherical CH capsule inside an octahedral spherical hohlraum Lan2013 ; Lan2014a ; Lan2014b ; Lan2014c ; Wang2019 ; Craxton2020DPP ; Craxton2021DPP ; WangLLERev2021 ; WangWY2021 ; Marangola2021 ; Davies2022 driven by 10 MJ laser, and discuss and illustrate the principles of the novel amplifier scheme by simulation results. In this design, we use the most economical CH as ablator and adopt the low entropy target design for the purpose of efficient compression and high burn efficiency of fuel, since the benefit-cost ratio should be considered to aim at energy production. To design the capsule, we use a 1D capsule-only multigroup radiation hydrodynamic code RDMG Feng1999 ; Lan2017POP ; Qiao2019PPCF ; Qiao2021PRL to simulate the implosion dynamics. We consider a radiation drive of four steps, with a 6 ns main pulse peaking at 300 eV. As a result, the spherical CH capsule contains three layers of CH ablator, including undoped CH, 2 \% Si doped CH and undoped CH. The capsule outer radius is 2200 \mu m , ablator thickness is 356 \mu m , and DT-ice layer thickness is 207 \mu m . The initial density is 1.069 g/cm 3 for CH, 1.147 g/cm 3 for 2 \% Si doped CH, 0.3 mg/cm 3 for DT gas, and 0.255 g/cm 3 for DT ice. The DT mass is 2.02 mg, and the total ablator mass is about 19.75 mg. Hereafter, we call this capsule as the amplifier capsule. To convert 3D lasers into a 1D spherical radiation without symmetry tuning, we consider an octahedral spherical hohlraum Lan2022MRE ; Chen2022MRE with a hohlraum-to-capsule radius ratio of 4 and six 2000- \mu m-radius laser entrance holes. We use a sandwich hohlraum wall Sandwich2010LPB , which has been successfully applied in the NIF ignition experiments Haan2011 ; Callahan2012POP ; Lindl2012LLNL ; Kline2013POP ; Doppner2015PRL ; Kritcher2022PRE ; Kritcher2024PRE . For simplicity, here we use an initial design

Read the complete text