Localization Accuracy Improvement in Multistatic ISAC with LoS/NLoS Condition using 5G NR Signals

Keivan Khosroshahi 1 3, Philippe Sehier 2, Sami Mekki 2, Michael Suppa 3 · 2024

Read Localization Accuracy Improvement in Multistatic ISAC with LoS/NLoS Condition using 5G NR Signals by Keivan Khosroshahi 1 3, Philippe Sehier 2, Sami Mekki 2, Michael Suppa 3 (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-17577.txt.

Introduction

Keivan Khosroshahi, Philippe Sehier, Sami Mekki, and Michael Suppa improved target localisation in a 2024 paper on joint sensing and communication. Such systems are expected to matter in sixth-generation networks. Poor propagation, with multipath and blocked sight lines, creates outlier measures that wreck accuracy.

The team used a 5G positioning signal as the sensing signal in a multistatic setup. Their new algorithm reduces outlier impact in range measures and accounts for range resolution error. Simulations based on industry standards covered urban and indoor settings. Average localisation error fell by up to about a quarter versus standard methods, with gains also at the ninetieth percentile.

Catalog record

CREATORKeivan Khosroshahi 1 3, Philippe Sehier 2, Sami Mekki 2, Michael Suppa 3
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-17577

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Localization Accuracy Improvement in Multistatic ISAC with LoS/NLoS Condition using 5G NR Signals Thanks: K. Khosroshahi’s and M. Suppa’s work is supported by the H2020 MSCA 5GSmartFact project under grant ID 956670. S. Mekki’s and P. Sehier’s work is supported by the European Commission through the project 6G-DISAC under grant ID 101139130. Keivan Khosroshahi 1 3, Philippe Sehier 2, Sami Mekki 2, Michael Suppa 3 Abstract Integrated sensing and communication (ISAC) is anticipated to play a crucial role in sixth-generation (6G) mobile communication networks. A significant challenge in ISAC systems is the degradation of localization accuracy due to poor propagation conditions, such as multipath effects and non-line-of-sight (NLoS) scenarios. These conditions result in outlier measurements that can severely impact localization performance. This paper investigates the enhancement of target localization accuracy in multistatic ISAC systems under both line-of-sight (LoS) and NLoS conditions. We leverage positioning reference signal (PRS), which is currently employed in fifth-generation (5G) new radio (NR) for user equipment (UE) positioning, as the sensing signal. We introduce a novel algorithm to improve localization accuracy by mitigating the impact of outliers in range measurements, while also accounting for errors due to PRS range resolution. Eventually, through simulation results, we demonstrate the superiority of the proposed method over previous approaches. Indeed, we achieve up to 28 % 28\% and 20 % 20\% improvements in average localization error over least squares (LS) and iteratively reweighted least squares (IRLS) methods, respectively. Additionally, we observe up to 16 % 16\% and 13 % 13\% enhancements in the 90 90 th percentile of localization error compared to LS and IRLS, respectively. Our simulation is based on 3rd Generation Partnership Project (3GPP) standards, ensuring the applicability of our results across diverse environments, including urban and indoor areas. I Introduction Sensing using radio signals has gained significant interest in beyond fifth-generation (B5G) and sixth-generation (6G) . Integrated sensing and communication (ISAC) is anticipated to emerge as a promising technology in future wireless systems. The emergence of ISAC offers numerous sensing applications, ranging from remote healthcare and weather monitoring to target tracking, gesture recognition, autonomous vehicles, and augmented reality (AR) [ 1 ] , [ 2 ] . Reference signals in wireless communication systems are known for their excellent passive detection performance and strong resistance to noise [ 3 ] . This has led to increased interest in developing sensing signals based on reference signals. Among the various reference signals in fifth-generation (5G) networks, the positioning reference signals (PRS) is particularly notable for sensing applications because of its abundant time-frequency resources and flexible configuration. The PRS was introduced in 3rd generation partnership project (3GPP) release 16 of the 5G specification to improve the positioning accuracy of connected user equipment (UEs) [ 4 ] . On the other hand, research on ISAC has mostly concentrated on waveform design and signal processing, especially in monostatic systems where the transmitter and receiver are co-located. In contrast, bistatic ISAC, where the transmitter and receiver are not colocated, offers the advantage of eliminating the need for full-duplex capability. Multistatic ISAC, which employs multiple dispersed transmitters and receivers, offers advantages such as diversity gain from independent sensing at each receiver [ 5 ] . However, non-line-of-sight (NLoS) paths between the transmitter, receiver, and target can lead to measurement errors, known as outliers. Since localization accuracy is highly sensitive to the outliers, it is crucial to take them into account. Therefore, one of the main challenges in localization and sensing is to efficiently mitigate the impact of outliers [ 6 ] . The research community has proposed several methods to identify and reject outliers from time of arrival (ToA) , or equivalently, range measurements. However, the method explained in [ 6 ] suffers from a drawback as it requires a priori information regarding the status of the transmission path i.e., line-of-sight (LoS) or NLoS , and the transmission time of the signal which might not be available. Authors in [ 7 ] employ a recursive weighted least squares method, which requires a single reference base station (BS) to compute the time difference of arrival (TDoA) that leads to an inaccurate position estimation if the reference BS is identified as an outlier. Similarly, in [ 8 ] , a reference BS is defined, which introduces the drawback that the reference itself may contain an outlier. Authors in [ 9 ] introduce a reference-free TDoA -based positioning method but does not address the issue of outlier rejection. To overcome this issue, authors in [ 10 ] , implement the iteratively reweighted least square (IRLS) technique, which is robust to the outliers. The problem with IRLS algorithm is that it might diverge in some cases, depending on initial values and the presence of outliers. Moreover, the previously cited works focused on the positioning of the connected devices. The problem of outliers also exists in sensing for passive targets, which degrades the accuracy of location estimation. To the best of the authors’ knowledge, passive target localization under LoS / NLoS conditions in a multistatic ISAC scenario using 5G new radio (NR) reference signal, while considering 3GPP standard constraints, has not yet been investigated. In this work, we focus on the localization accuracy enhancement of an unconnected target in multistatic ISAC under both LoS and NLoS conditions. We utilize PRS , currently employed in 5G NR for UEs positioning, as the sensing signal. We introduce a novel algorithm that improves the localization accuracy of the target by accounting for the effects of both outliers and range estimation error caused by PRS range resolution. Simulation results demonstrate the effectiveness of our proposed method compared to least square (LS) and IRLS approaches. We achieve significant improvement in average localization error compared to LS and IRLS methods. Additionally, our results show considerable enhancement in 90 th percentile of the localization error compared to LS and IRLS . II PRS as Reference Signals for Sensing The allocation of physical resource blocks (PRBs) in 5G NR is defined in the technical specification (TS) 38.214 [ 11 ] . PRB consists of 12 consecutive subcarriers in the frequency domain and 14 symbols in the time domain. According to TS 38.211 [ 12 ] , the generation of the PRS sequences is performed using the following equation: \kappa(m)=\frac{1}{\sqrt{2}}(1-2~c(2m))+j\frac{1}{\sqrt{2}}(1-2~c(2m+1)) (1) where c(i) denotes the Gold sequence of length 31. The starting value of c(i) for the PRS is provided in [ 12 ] . PRS allocation consists of a minimum of 24 PRBs and a maximum of 272 PRBs , illustrating the flexible transmission parameters supported in 5G NR . This flexibility allows PRS to adapt its time-frequency resource configuration to meet sensing accuracy requirements for diverse applications. As per the PRS resource mapping guidelines indicated in TS 38.211 [ 12 ] , four comb structures—Comb 2, 4, 6, 12—in the frequency domain and five symbol configurations—Symbol 1, 2, 4, 6, 12—in the time domain are supported. Further details on PRS configuration and resource allocation in ISAC scenarios can be found in [ 13 ] . III Multistatic ISAC System Model We consider a multistatic ISAC scenario comprising S transmitters, K receivers, and one passive point-like target. Figure 1 shows the considered setup where the UEs are configured

Read the complete text