Intrinsic pinning of FeSe 1 - x S x single crystals probed by torque magnetometry

Nan Zhou, Yue Sun, Q. Hou, T. Sakakibara, X. Z. Xing, C. Q. Xu, C. Y. Xi, Z. S. Wang, Y. F. Zhang, Y. Q. Pan, B. Chen, X. Luo, Y. P. Sun, Xiaofeng Xu, T. Tamegai, Mingxiang Xu, Zhixiang Shi · 2024

Read Intrinsic pinning of FeSe 1 - x S x single crystals probed by torque magnetometry by Nan Zhou, Yue Sun, Q. Hou, T. Sakakibara, X. Z. Xing, C. Q. Xu, C. Y. Xi, Z. S. Wang, Y. F. Zhang, Y. Q. Pan, B. Chen, X. Luo, Y. P. Sun, Xiaofeng Xu, T. Tamegai, Mingxiang Xu, Zhixiang Shi (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-16170.txt.

Introduction

Nan Zhou and eighteen co-authors probe how a layered superconductor grips magnetic flux in a 2024 paper. Inside such materials, swirling current vortices can pin in place, letting big currents flow without loss. Some pinning is intrinsic, built into the crystal's own layers and energy gaps.

The team twisted crystals of iron selenide laced with sulfur and watched the magnetic torque resist. With the field lying in the crystal's plane, a fourfold pattern appeared, blamed on gap valleys working with twin boundaries in the crystal. Peaks in the other direction matched the layers themselves. The fingerprints chart where engineers might strengthen pinning on purpose.

Catalog record

CREATORNan Zhou, Yue Sun, Q. Hou, T. Sakakibara, X. Z. Xing, C. Q. Xu, C. Y. Xi, Z. S. Wang, Y. F. Zhang, Y. Q. Pan, B. Chen, X. Luo, Y. P. Sun, Xiaofeng Xu, T. Tamegai, Mingxiang Xu, Zhixiang Shi
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-16170

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Intrinsic pinning of FeSe 1 - x S x single crystals probed by torque magnetometry Nan Zhou, Yue Sun, Q. Hou, T. Sakakibara, X. Z. Xing, C. Q. Xu, C. Y. Xi, Z. S. Wang, Y. F. Zhang, Y. Q. Pan, B. Chen, X. Luo, Y. P. Sun, Xiaofeng Xu, T. Tamegai, Mingxiang Xu, Zhixiang Shi Abstract Intrinsic pinning is caused by natural pinning centers that occur because of the modulation of the order parameter or weak superconducting layers. Early work has shown that intrinsic pinning generates a high pinning force and critical current density in some layered oxide superconductors. Studying the intrinsic pinning of superconductors is crucial for both fundamental studies and potential applications. Herein, we use torque magnetometry to study angle-resolved in-plane and out-of-plane magnetic torque for a series of high-quality FeSe 1 - x S x single crystals. A fourfold torque signal was observed when the magnetic field was within the ab plane. We interpret that this fourfold in-plane irreversible torque is from the intrinsic pinning due to combined effects of gap nodes/minimum and twin domains. Additionally, we attributed the observed out-of-plane torque peaks to intrinsic pinning due to the layered structure. Preprint: FeSeS 1. Introduction Understanding the mechanism of intrinsic pinning in high T c layered cuprates [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 ] and iron-based [ 9 , 10 , 11 , 12 , 13 , 14 ] superconductors is essential for fundamental studies and potential applications. Type-II superconductors are characterised by the appearance of thin filaments of normally conducting material in the superconducting (SC) state. Each unit carries a quantised amount of magnetic flux, and is circled by a super current vortex. Usually, the model of the vortex pinning with a “pinning potential” could understand the motion of individual vortices, which could drive these vortices find the pinning sites [ 15 ] . In practice, these vortex pinning sites are generated by the extrinsic defects (such as impurities [ 16 ] , dislocations [ 7 ] , and twin boundaries (TBs) [ 3 ] ) or intrinsic pinning centers, which could reduce the energy penalty associated with the vortex core. Among them, the extrinsic defects usually generates a disordered potential with random distribution or only limit in certain region, while the intrinsic pinning generates a periodic vortex pinning potential [ 6 ] . The first quantitative intrinsic pinning analysis was conducted in the layered oxide superconductor YBa 2 Cu 3 O 7 by Tachiki and Takahashi [ 1 , 2 ] . Subsequently, intrinsic pinning was also confirmed in other superconductors [ 9 , 10 , 11 , 12 , 17 , 18 ] . Usually, the SC order parameter or layered structure acts as a natural pinning center, driving a system to easy-to-access intrinsic pinning [ 1 , 2 ] , corresponding to a high pinning force, critical current density, and magnetic torque signal [ 4 ] . Therefore, intrinsic pinning can provide information about the SC gap structure and anisotropy of superconductivity. However, it has been studied only in a few superconductors because it is usually mixed or covered by strong extrinsic pinning. Figure 1: (a) Room temperature XRD patterns for the series of FeSe 1 - x S x single crystals studied in this paper. (b) Enlarged (004) peaks for all crystals near 68 ∘ . (c) Evolution of the c -axis lattice constant as a function of actual doping content x . (d)–(f) Temperature dependence of the zero-field resistivity and its first derivative for FeSe 1 - x S x single crystals. (g)-(i) show the enlarged plot of the zero-field resistivity data around the SC transition. The dash lines correspond to the power-law fitting \rho (T)= \rho 0 + AT α ( \rho 0 , A , and \alpha are the fitting parameters). (j)-(l) Temperature dependence of the zero-field cooling and field cooling magnetic susceptibility \chi after considering the demagnetization effect. Probing the intrinsic pinning requires a bulk technique with angular resolution. Magnetic torque ( \tau = M \times H ) is a powerful thermodynamic tool used to obtain bulk information and is sensitive in probing any anisotropic susceptibility, which is defined as the first derivative of the free energy with respect to angle ( \tau = - \partial F / \partial \theta ). This method could provide a direct way to study interesting issues, such as the symmetry of the SC order parameter [ 17 , 19 , 4 ] and the anisotropy of intrinsic pinning [ 4 , 20 , 19 , 18 , 8 ] , et al .. The target material in this study is the prototypical 11-family iron chalcogenide FeSe 1 - x S x [ 21 , 22 , 23 , 24 ] . In parent FeSe, it has the simplest PbO-type structure, composed of only Fe-Se layers, and shows superconductivity without further doping [ 25 ] . The SC gap is strongly anisotropic [ 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 ] with nodes or deep minima [ 34 , 35 , 36 , 37 , 33 , 38 ] . Meanwhile, it has also been reported to be a very clean system [ 39 , 27 , 40 , 41 ] . Therefore, FeSe could be an ideal platform for the investigation of the intrinsic pinning [ 42 ] . Recently, some studies construct the phase diagram of FeSe 1-x S x by using a hydrothermal ion release/introduction technique [ 43 ] and the Chemical Vapor Transport (CVT) method [ 22 ] , respectively. In comparison, these FeSe 1-x S x (0 \leq x \leq 0.2) crystals obtained from the CVT method show higher quality, which are more suitable for studying their intrinsic pinning properties. Here, we systematically examined the angle-resolved magnetic torque of a series of FeSe 1 - x S x ( x = 0, 0.11, 0.15) single crystals. Fourfold in-plane and twofold out-of-plane magnetic torque peaks were observed at particular magnetic field directions. By analyzing the obtained results, we considered that a combination of gap nodes/minimum and twin domains create the intrinsic pinning responsible for the in-plane magnetic torque peaks. Concurrently, the layered structure are responsible for the out-of-plane magnetic torque peaks. 2. Experiment details The single crystals of FeSe 1 - x S x ( x = 0, 0.11, 0.15) studied here were synthesized using the vapor transport method [ 21 ] . The actual chemical composition was determined via energy dispersive x-ray spectroscopy (EDX). The crystallographic structure was characterized by x-ray diffraction (XRD) at room temperature using a Rigaku diffractometer with Cu K \alpha radiation. The direction of the crystal axes were determined by single-crystal XRD. Zero-field cooling (ZFC) and field cooling (FC) dc magnetization modes were employed to probe the SC transition and volume fraction using a MPMS-7 system. Electronic transport measurements were performed in a physical property measurement system (PPMS, Quantum Design). High-field transport measurements were carried out in water-cooled magnet with the steady fields up to 38 T at the High Magnetic Field Laboratory of Chinese Academy of Sciences by using standard a.c. lock-in techniques. The

Read the complete text