Role of the ratio of tangential to normal stiffness coefficient on the behaviour of vibrofluidised particles

Alok Tiwari, Sourav Ganguli, V. Kumaran, Manaswita Bose · 2024

Read Role of the ratio of tangential to normal stiffness coefficient on the behaviour of vibrofluidised particles by Alok Tiwari, Sourav Ganguli, V. Kumaran, Manaswita Bose (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-16133.txt.

Introduction

Alok Tiwari and co-authors asked in 2024 how one contact knob steers grains in a shaken bed. Simulations of flowing grains hinge on the contact law between grains, above all the ratio of sideways to head-on stiffness, called kappa. The team shook a bed of grains in the LAMMPS simulator and varied that ratio. They tracked contact counts, forces, bounce spin, and bulk profiles.

Kappa strongly shaped which contact regimes ruled and how speeds spread through the bed. For grains with modest surface grip, the field's stock value of two-sevenths gave results well apart from the band that real material traits imply. The team warns that kappa is not a free knob: set it from true material values or the bed's tale skews.

Catalog record

CREATORAlok Tiwari, Sourav Ganguli, V. Kumaran, Manaswita Bose
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-16133

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Role of the ratio of tangential to normal stiffness coefficient on the behaviour of vibrofluidised particles Alok Tiwari, Sourav Ganguli, V. Kumaran, Manaswita Bose Abstract The selection of parameters in the contact law for inter-particle interactions affects the results of simulations of flowing granular materials. The present study aims to understand the effect of the ratio of tangential to normal spring stiffness coefficient ( κ \kappa ) on inter-particle contact behaviour in terms of the rotational coefficient of restitution determined using data obtained from multi-particle simulations. The effect of κ \kappa on the profiles of the micro- and macroscopic properties of particles in a vibrofluidised bed is also investigated. The Discrete Element Method (DEM) is used to simulate a vertically vibrated fluidised bed using the open-source software LAMMPS. The inter-particle and wall-particle contact forces are determined using the linear spring-dashpot (LSD) model. The distribution of the mean co-ordination number, force during the contact, contact regimes, and rotational coefficient of restitution are determined from the data obtained from simulations. It was shown that κ \kappa plays a significant role in the distribution of inter-particle contacts between different regimes and, thereby, the velocity distribution and profiles of statistically averaged properties of the vibrofluidised particles. Our results show that for particles with surface friction coefficient μ > 0.1 \mu>0.1 , the commonly used value κ = 2 7 \kappa=\frac{2}{7} results in quantitatively different results from those obtained using 0.67 ≤ κ < 1 0.67\leq\kappa<1 , a range consistent with the realistic values of Poisson ratios for simple materials. I Introduction Realistic modelling of the inter-particle interaction and selection of parameters are crucial for the accurate simulation of the macroscopic behaviour of real granular materials [ 1 , 2 , 3 , 4 ] . Traditionally, inter-particle or wall-particle interactions are modelled either considering the collision to be “instantaneous”, known as the hard sphere model (HS) [ 5 ] or representing the deformation of the contact surface with an appropriate combination of a spring (linear or non-linear), a dashpot and a slider. Cundall and Strack [ 6 ] were the first to use a combination of a linear spring, dashpot, and a slider to model the contact between colliding particles. Their results show that the behaviour depends on the ratio of the normal to the tangential spring stiffness constant and the Poisson ratio. Later, Tsuji and coworkers [ 7 ] implemented Hertz and Mindlin’s no-slip models for determining the normal and the tangential contact forces, respectively [ 8 ] . Silbert et al. simulated the flow of granular materials over an inclined plane using linear spring dashpot and Hertz-Mindlin model [ 2 ] . They have performed simulations for the normal spring stiffness constant k_{n}\approx 10^{5}mg/d , where m and d are the mass and diameter of individual particles. They selected the ratio of the normal ( k_{n} ) to the tangential ( k_{t} ) spring stiffness constant (\kappa=(k_{t}/k_{n})) as (2/7) since the time-periods of contacts for this value are equal [ 9 , 10 ] ; however, a selection of \kappa=(2/7) also leads to mutually exclusive sticking and sliding regimes [ 11 ] . Silbert et al. [ 2 ] have suggested that the selection of \kappa has a marginal effect on the average behaviour of the granular flow over the inclined plane. They have also shown that the velocity and the volume fraction profiles on an inclined plane converge for normal spring constant k_{n}>10^{5}mg/d . In a series of later articles, the effect of spring stiffness constant on Bagnold scaling [ 12 ] , coordination number [ 13 ] , and normal stress [ 14 ] is investigated. In most of the earlier and many recent articles [ 15 , 16 , 17 ] , \kappa is maintained as (2/7) . However, Thornton and coworkers [ 10 ] explicitly recommended the selection of the ratio in the range 0.67\leq\kappa<1 , based on the realistic values of Poisson ratio, 0<\nu\leq 0.5 . Their work is limited to single-particle contact. Since \kappa=(2/7) is mostly used in earlier investigations, it is important to study other values of \kappa to examine whether there is any qualitative difference. Loading and unloading behaviour of a single particle in contact with a planar surface or with another particle has been investigated in the literature using experiments [ 18 ] , a discrete element approach, modelling the contact using linear and Hertz spring [ 19 ] , finite element method [ 20 ] and smooth particle hydrodynamics [ 21 ] . Tangential and rotational coefficients of restitution have been determined experimentally [ 22 , 23 , 24 ] and from numerical simulations [ 10 , 25 ] . Recently, Kosinski et al. [ 26 ] proposed a data-driven approach for developing an empirical relationship expressing the rotational coefficient of restitution as a function of the modulus of elasticity ( Y ), Poisson ratio ( \nu ), normal coefficient of restitution ( e_{n} ) and impact angle ( \gamma ), \beta=\beta\left(Y,\nu,e_{n},\cot{\gamma}\right) . However, to our knowledge, complete statistics of the rotational coefficient of restitution from a multi-particle simulation have not yet been reported. The present work is motivated by the question of whether the value of \kappa influences the flow behaviour of granular materials. A vibrofluidised bed is simulated to determine the rotational coefficient of restitution from the position-velocity data of particles obtained from the discrete element method simulations. Vibrofluidisation for this study is chosen because (a) in a vertically vibrated bed, there is no mean linear and angular velocity; (b) unlike a homogeneously cooling system, in a vibrofluidised bed, a steady state can be achieved; (c) volume-fraction (density) and the pressure profiles are linked with the momentum conservation [ 27 ] . The specific objectives are: 1. to determine the influence of \kappa on the rotational coefficient of restitution; 2. to investigate the effect of \kappa on the linear and the rotational velocity distribution of particles, profiles of solid volume fraction, translational and rotational granular temperature, and pressure for different inter-particle coefficients of friction. To that end, a collection of spherical particles subject to vertical vibration is simulated using the discrete element method. The following sections briefly discuss the simulation methodology, theoretical background, and analysis method. II Methodology II.1 Simulation domain Figure 1 shows a schematic of the vertically vibrated fluidised bed. The base plate moves sinusoidally with a velocity u(t)=2\pi Af\cos(2\pi ft) with a fixed frequency of 100 Hz and an amplitude 0.3 d . The top plate is placed at 1000d above the base plate and is considered smooth and elastic. The bed is 40d\times 40d in cross-section and is periodic in the directions normal to that of the vibration. A total of 6400 spherical particles are simulated. Inter-particle and wall-particle contacts are modelled using a linear spring and a dashpot, popularly known as LSD (Fig. 2(a) ) [ 17 ] . Simulations are performed using the open-source software LAMMPS [ 28 ] . Figure 1 : Schematic of the simulation domain. II.2 Discrete element method The normal ( \vec{F}_{nij} ) and the tangential ( \vec{F}_{tij} ) force exerted on the particle i by particle j at contact, are expressed as: \vec{F}_{nij}=-k_{n}\xi_{n}\hat{r}_{ij}-\gamma_{n}{\vec{v}_{n}}, (1) \vec{F}_{tij}=-\min\left(k_{t}\left\|\vec{\xi}_{t}\right\|,\mu\left\|\vec{F}_{nij}\right\|\right)\hat{t}_{ij}. (2) Here, \xi_{n}=\left\|\vec{r}_{ij}\right\|-d is

Read the complete text