Performance limits of spectro-temporal unitary transformations for coherent modulation

2024

Read Performance limits of spectro-temporal unitary transformations for coherent modulation (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-16110.txt.

Introduction

Callum Deakin and Xi Chen analyse limits of coherent modulation built on lossless unitary transforms in a short note from 2024. Such transforms reshape a signal across spectrum and time without loss, which offers a fresh route to modulation. The note tests how clean the output can stay at set laser power levels. Results show high signal quality above a strong threshold and better scores than standard IQ modulators at equal transmitter laser power. The work frames where this modulation route can beat classic designs on raw performance.

Catalog record

YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE12 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-16110

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Performance limits of spectro-temporal unitary transformations for coherent modulation Abstract We analyse the performance limits of coherent modulation based on lossless unitary transformations, demonstrating that they can achieve high ( > > 30 dB) SINAD and outperform conventional IQ modulators at equivalent transmitter laser powers. Callum Deakin, Xi Chen Nokia Bell Labs, 600 Mountain Ave, Murray Hill, NJ, USA [email protected] 1 Introduction Conventional coherent modulation is based on amplitude modulation via Mach-Zehnder modulators (MZMs) which is inherently lossy since it is based on switching. Excess light is discarded via the unused output port of the optical coupler that combines the two arms of an MZM and the optical coupler that combines the in-phase (I) and quadrature (Q) parts of the optical field, as shown in Fig. 1 (a). MZM-based coherent transmitters often have modulation losses on the order of 20 dB. Such significant loss is detrimental for power-efficiency and may become prohibitive for future transceivers with THz level bandwidths, such as highly parallel or frequency-comb-based transceivers, where the available power on the photonic integrated circuit is limited. An alternative modulation scheme based on multiple stages of alternating phase modulators and dispersive elements (Fig. 1 (b)) has been proposed and demonstrated [ 1 , 2 ] , inspired by its spatial analog: the multi-planar light converter (MPLC) [ 3 ] . Conceptually, the scheme achieves amplitude modulation by redistributing light temporally rather than switching. This scheme is known as a spectro-temporal unitary transformation or all-pass modulation, as the relation between the output target optical waveform (e.g. a Nyquist-pulse-shaped N -QAM waveform) and the input CW light can be viewed as a unitary transformation on the spectro-temporal modes. Since it uses only phase modulators and dispersive elements, it is theoretically lossless. It has been recently shown that this modulation scheme can be operated in real time [ 4 ] and can modulate the different wavelengths of a frequency comb independently without any wavelength mux/demux [ 5 ] . Besides classical optical communications, the lossless nature of these transformations also make them highly attractive for quantum information processing [ 2 , 6 ] . Fig. 1: (a) Conventional IQ modulation based on amplitude modulation, a(t) . (b) Lossless spectro-temporal unitary transform based arbitrary waveform modulation based on cascaded phase modulators \phi(t) and dispersive elements H(\omega) . Though experimentally demonstrated, there has been little to no discussion on the performance limits of this modulation scheme. Here, we examine how the key design factors, including number of stages, amount of dispersion, and phase modulator bandwidth impact the accuracy of these spectro-temporal unitary transformations. Using root-raised-cosine (RRC) shaped 16-QAM as an example, we show that high ( >30 dB) signal-to-noise-and-distortion ratio (SINAD) is achievable if the bandwidth of the phase modulator is sufficient. We also reveal that the digital-to-analog converter quantization noise can cause an nonlinear increase in the overall system noise and distortion. Finally, by calculating the shot noise limited transmitter SINAD of the unitary transformation scheme, we show that the phase modulation scheme can substantially outperform the lossy conventional approach at the same transmitter laser power. 2 Distortions from finite stage spectro-temporal unitary transformations (a)(i) (a)(ii) 0 0.2 0.4 -40 -20 0 Frequency ( f_{s} ) PSD (dB) 0 0.2 0.4 -40 -20 0 Frequency ( f_{s} ) PSD (dB) 0 0.1 0.2 0.3 0.4 0.5 0 10 20 30 40 50 60 N=1 N=2 N=3 N=4 N=5 N=6 (a) Dispersion per stage, D (ps -1 nm -1 ) SDR (dB) (b)(i) (b)(ii) 0 0.1 0.2 -40 -20 0 Frequency ( f_{s} ) PSD (dB) 0 0.2 0.4 0.6 -40 -20 0 Frequency ( f_{s} ) PSD (dB) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 10 20 30 40 50 60 70 80 N=1 N=2 N=3 N=4 N=5 N=6 (b) Phase modulator bandwidth, B_{\textnormal{PM}} ( f_{s} ) SDR (dB) Fig. 2: (a) SDR v. dispersion per stage ( D ) for a B_{\textnormal{PM}}= 0.55 f_{s} , and varying number of stages, N . The dispersion is normalised to the symbol period squared ( T_{s}^{2} ), and so has units ps -1 nm -1 . (b) SDR v. phase modulator bandwidth ( B_{\textnormal{PM}} ), for D=10~ ps -1 nm -1 , and varying number of stages, N . The phase modulator bandwidth is plotted in units of symbol rate, f_{s} . To understand the performance of the spectro-temporal unitary transformation method scheme without loss of generality, we use an RRC ( \beta=0.1 ) 16 -QAM signal to study the signal-to-distortion ratio (SDR). Here, the ‘distortions’ are those introduced by the imperfect transformation matrix as limited by design constraints. We simulate 10 independent sets of 512 symbols, as 512 symbols is a suitable block length for real-time continuous operation when considering the computational complexity in solving the transformation matrix [ 4 ] . The required electrical waveforms for driving the phase modulations are calculated using a modified wavefront matching algorithm [ 7 ] , in which the initial CW wave is propagated back and forth through the system model while minimising the phase difference at each stage. The phase update for the n -th phase modulator at iteration k+1 is given by \phi_{n,k+1}(t)=\phi_{n,k}(t)-\mu\arg\Big[h(t)*F_{n}(t)B_{n}^{*}(t)e^{-i\phi_{n,k}(t)}\Big] (1) where B_{n}(t) is the backwards propagating wave, F_{n}(t) the forward propagating wave, h(t) is the impulse repsonse of the phase modulator, and \mu is the update step size. The algorithm is iterated until no improvements in SDR are seen. Although this not necessarily the computationally efficient algorithm [ 4 ] , it offers the most stable convergence to the target waveform [ 8 ] and so is useful for examining limits. The simulation is oversampled by a factor of eight (i.e. 8 f_{s} ) which ensures stable convergence. Fig. 2 shows the average converged symbol SDRs for the number of stages N ( N=1,2,...,6 ) while varying the dispersion per stage D (Fig. 2 (a)) and the phase modulator bandwidth B_{\textnormal{PM}} (Fig. 2 (b)). Shaded regions indicate the minimum and maximum SDRs of the 10 sequences. Fig. 2 (a) shows that, in general, the more number of stages available, the higher SDR can be achieved. At any given number of stages N , there is a maximum SDR even if D can be increased indefinitely. This is because the function of the dispersive element is to provide sufficient temporal mode mixing to approximate the required non-monomial matrix operation [ 9 ] , which is achieved at a finite amount of dispersion. Overall, the distortion level can be very low (e.g. -35 dB) if a few (e.g. 4) stages with a small amount of dispersion per stage (e.g. 0.3 ps -1 nm -1 ) can be implemented. For instance, at 200 GBd, 0.3 ps -1 nm -1 is a dispersion of 7.5 ps/nm, which can easily be achieved on chip in standard silicon photonics [ 10 ] . In the extreme case of N=1 , the SDR does not change with dispersion since in this case the dispersive efficiency of a single element is defined purely by the target waveform [ 8 ] . Our simulations showed that varying the block length, \beta , or QAM order does not substantially affect the converged SDR. This is expected since the dispersive efficiency

Read the complete text