Distributed Beam Alignment in sub-THz D2D Networks

Fernando Pedraza, Jan Christian Hauffen, Fabian Jaensch, Shuangyang Li, Giuseppe Caire · 2024

Read Distributed Beam Alignment in sub-THz D2D Networks by Fernando Pedraza, Jan Christian Hauffen, Fabian Jaensch, Shuangyang Li, Giuseppe Caire (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-16015.txt.

Introduction

Fernando Pedraza and co-authors published a 2024 paper on aligning beams in networks of devices that talk directly to each other at very high frequencies. At sub-terahertz frequencies, signals travel in narrow beams that must point at the partner device. Learning the full channel between every pair takes a heavy toll in time, and the cost grows with each added device.

The authors design special pilot signals that many devices can send at once without clashing. The pilots keep a steady strength, easing hardware demands, and spread their energy on a comb of chosen frequencies. A schedule then rotates devices between sending and listening roles. This makes the alignment cost grow slowly, with the logarithm of the device count, instead of in direct proportion. Simulations of indoor settings, traced ray by ray, show the aligned channels come out nearly flat across frequency. That flatness suits simple, fast transmission.

Catalog record

CREATORFernando Pedraza, Jan Christian Hauffen, Fabian Jaensch, Shuangyang Li, Giuseppe Caire
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-16015

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Distributed Beam Alignment in sub-THz D2D Networks Fernando Pedraza, Jan Christian Hauffen, Fabian Jaensch, Shuangyang Li, Giuseppe Caire Abstract Devices in a D2D ( D2D ) network operating in sub-THz frequencies require knowledge of the spatial channel that connects them to their peers. Acquiring such high dimensional channel state information entails large overhead, which drastically increases with the number of network devices. In this paper, we propose an accelerated method to achieve network-wide beam alignment in an efficient way. To this aim, we consider CS ( CS ) estimation enabled by a novel design of pilot sequences. Our designed pilots have constant envelope to alleviate hardware requirements at the transmitters, while they exhibit a “comb-like” spectrum that flexibly allocates energy only on certain frequencies. This design enables multiple devices to transmit thier pilots concurrently while remaining orthogonal in frequency, achieving simultaneous alignment of multiple devices. Furthermore, we present a sequential partitioning strategy into transmitters and receivers that results in logarithmic scaling of the overhead with the number of devices, as opposed to the conventional linear scaling. Finally, we show via accurate modeling of the indoor propagation environment and ray tracing simulations that the resulting sub-THz channels after successful beamforming are approximately frequency flat, therefore suitable for efficient single carrier transmission without equalization. We compare our results against an ”802.11ad inspired” baseline and show that our method is capable to greatly reduce the number of pilots required to achieve network-wide alignment. BS base station UE user equipment BT beam tracking mmWave millimeter wave LOS line of sight NLOS non-LOS AoA angle of arrival AoD angle of departure ULA uniform linear array OFDM orthogonal frequency division multiplexing HMM hidden Markov model AWGN additive white Gaussian noise CDF cummulative distribution function ISAC integrated sensing and communication RF radio frequency MIMO multiple-input multiple-output CP cyclic prefix DL downlink FD fully digital FC fully connected HDA hybrid digital analog OSPS one-stream-per-subarray TDMA time division multiple access TDM time division multiplexing DPSS discrete prolate spheroidal sequence SNR signal to noise ratio SINR signal to interference and noise ratio HMM hidden Markov model CDF cumulative distribution function CSI channel state information V2I vehicle-to-infrastructure MU-MIMO multi-user MIMO ADC analog-to-digital converter CFO carrier frequency offset DFT discrete Fourier transform MMV multiple measurement vector BA beam alignment ISI intersymbol interference ICI intercarrier interference DFT discrete Fourier transform IDFT inverse DFT D2D device-to-device ISTA iterative soft-thresholding algorithm CS compressed sensing MFB matched filter bound FDE frequency domain equalization ZF zero forcing MMSE minimum mean square error PAPR peak to average power ratio MAE mean absolute error ©2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. I Introduction The explosive growth of wireless communication applications has driven the demand for higher data rates and greater network capacity. To meet these requirements, mmWave ( mmWave ) and sub-THz frequencies, particularly within the 30-300 \mathrm{GHz} range, have emerged as a promising solution for indoor applications that require extremely high rates (e.g., supporting VR gargles, 8K TV sets, and in some specific industrial campus applications) [ 1 ] . Specifically, the IEEE 802.11ad standard [ 2 ] , operating at 60\text{\,}\mathrm{GHz} , demonstrates the potential of high frequency communication systems to achieve multi-gigabit per second data rates in indoor local area networks. However, the deployment of sub-THz communication introduces significant challenges due to the inherent propagation characteristics of high-frequency signals [ 3 ] . At these frequencies, the propagation losses are substantially higher compared to those at the lower microwave range. This necessitates the use of highly directional antennas and beamforming techniques to compensate for path loss and maintain the link budget. Beamforming not only helps in overcoming high propagation losses but also plays a critical role in minimizing interference in dense D2D networks [ 4 ] , where spatial reuse is essential for efficient spectrum utilization. In this context, BA ( BA ) emerges as a crucial process in sub-THz networks [ 5 ] . Efficient BA ensures that the transmitter and receiver beams are accurately aligned, maximizing the signal strength and minimizing the probability of link failure. However, the BA process introduces additional overhead, which can negatively impact the overall performance of the network, especially in dynamic indoor environments where devices may frequently change their positions. Therefore, it is imperative that the BA procedure is not only accurate but also fast, to reduce the overhead and maintain high data rates. The sparse nature of sub-THz channels, which are often composed of a dominant LOS ( LOS ) path and a limited number of strong reflections, offers an opportunity to optimize this alignment process using CS techniques [ 6 ] . CS leverages the sparse nature of the sub-THz channel, allowing the BA process to be performed more efficiently by reducing the number of measurements needed to identify the optimal beam directions. This approach is particularly beneficial in scenarios where rapid alignment is necessary, such as in mobile or dense indoor environments, where frequent realignments may be required due to device mobility or environmental changes. CS techniques have garnered considerable attention for their ability to reduce the overhead associated with BA in mmWave and sub-THz systems. The seminal work [ 7 ] proposed a CS -based approach that capitalizes on the sparsity of the mmWave channel. Their method effectively reduces the number of measurements needed to identify the optimal beam directions, thereby minimizing the overhead of the BA process. Building on this foundation, [ 8 ] introduced another CS -based method for initial access in high frequency systems using analog arrays. Their approach employs gradient-type methods and relies on a codebook-based beamforming strategy. The authors argue that designing precoders and combiners on-the-fly would be much slower compared to a codebook-based approach, which motivates us to consider codebook-based beamforming in our work. Their method hinges on the assumption that the channel gain after beamforming is, at least locally, a monomodal function of the beam index (i.e. the channel gain after beamforming always decreases when the difference between the index of a beam and the index of the optimal beam is made larger). However, this assumption may not hold in indoor scenarios, where a larger number of reflections can disrupt the monotonic relationship, leading to potential performance degradation in such environments. Beyond the theoretical work on CS -based BA , several works have experimentally demonstrated their practical feasibility. In particular, the authors of [ 9 ] implemented their proposed method on an off-the-shelf 802.11ad compliant router with 32 antenna elements, achieving successful performance. Similarly, [ 10 ] proposes a convolutional neural network based algorithm and test it on different hardware testbeds at the 60\text{\,}\mathrm{GHz} band. Most works in the high frequency D2D literature assume partial [ 11 , 12 ] of full [ 13 , 14 , 15 ] CSI ( CSI ) knowledge is available to a centralized controller. Then, an approximate solution to the problem of optimal resource allocation with directional links is searched for,

Read the complete text