Supplemental Material ——— Magnetic Bound States Embedded in Tantalum Superconducting Thin Films
Soroush Arabi, Qili Li, Ritika Dhundhwal, Dirk Fuchs, Thomas Reisinger, Ioan M. Pop, Wulf Wulfhekel · 2024
Read Supplemental Material ——— Magnetic Bound States Embedded in Tantalum Superconducting Thin Films by Soroush Arabi, Qili Li, Ritika Dhundhwal, Dirk Fuchs, Thomas Reisinger, Ioan M. Pop, Wulf Wulfhekel (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-15903.txt.
Introduction
Cleaning steps used to make tantalum devices can quietly damage the very films they prepare, this 2024 supplement reports. Soroush Arabi and co-authors used a scanning tunneling microscope at near-zero temperatures to inspect tantalum films after standard cleaning. Oxygen washing and argon milling are both routine steps before devices are finished.
The cleaning left magnetic bound states inside the film's superconducting gap, most likely from oxygen impurities driven in during the process. Such states are bad news for quantum bits built on these films, since they drain energy and blur quantum states. The findings warn makers to rethink cleaning recipes for superconducting hardware. The supplement supports a main paper on the same films.
Catalog record
| CREATOR | Soroush Arabi, Qili Li, Ritika Dhundhwal, Dirk Fuchs, Thomas Reisinger, Ioan M. Pop, Wulf Wulfhekel |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 3 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-15903
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Supplemental Material ——— Magnetic Bound States Embedded in Tantalum Superconducting Thin Films
Soroush Arabi, Qili Li, Ritika Dhundhwal, Dirk Fuchs, Thomas Reisinger, Ioan M. Pop, Wulf Wulfhekel
Abstract
In this supplementary material, we provide detailed information on the characterization of the superconducting tunnel junction used in the STM measurements to determine the superconducting gap and critical magnetic field of the α ( 111 ) \alpha(111) tantalum thin film, as reported in the main text.
FIG. S1:
Characterization of the SIS tunnel junction under an applied magnetic field.
(a)
Evolution of the
dI/dV
spectra of the SIS tunnel junction as a function of out-of-plane magnetic fields, revealing the superconducting gaps of both the sample and the tip.
(b)
Superconducting gap of the tantalum thin film as a function of magnetic field.
(c)
Superconducting gap of the tantalum tip as a function of magnetic field. The superconducting gaps for both the sample and the tip were extracted from each
dI/dV
spectrum using the Dynes formula. The measurements in
(b)
and
(c)
were fitted using the Landau-Ginzburg model,
\Delta/\Delta_{0}=1-(B/B_{c})^{2}
, yielding zero-field superconducting gaps of
\Delta_{\text{sample,0}}=600.3\,\mu eV
and
\Delta_{\text{tip,0}}=208.1\,\mu eV
, with critical fields of
B_{\text{sample,c}}=103.1\,\text{mT}
and
B_{\text{tip,c}}=1.59\,\text{T}
, respectively. The
dI/dV
measurements were taken at a fixed tip position under the following conditions: bias voltage
V_{b}=1.5\,\text{mV}
, current setpoint
I_{p}=100\,\text{pA}
, lock-in modulation voltage
V_{\text{mod}}=20\,\mu V
, and temperature
T=45\,\text{mK}
.
S1. Characterization of the SIS Tunnel Junction
We extract the superconducting gap and critical magnetic field of
\alpha(111)
Ta based on the method explained in Figure
S1
. We performed
dI/dV
measurements in an out-of-plane magnetic field. The
dI/dV
spectrum evolved from a double-gap structure at low magnetic fields for the combined gaps (Figure
S1
a, top panel), to a conventional BCS-like single-gap spectrum at higher magnetic fields, representing the tip’s superconducting gap (Figure
S1
a, bottom panel).
The superconducting gap at each magnetic field was determined by fitting the spectrum with the Dynes function
1
, after which the measured gaps as a function of magnetic field were fit using the Ginzburg-Landau model
2
,
3
(Figure
S1
b and S1c). This analysis yielded zero-field superconducting gaps of
\Delta_{\text{sample,0}}=600.3\,\mu eV
and
\Delta_{\text{tip,0}}=208.1\,\mu eV
, with corresponding critical fields of
B_{\text{sample,c}}=101.7\,\text{mT}
and
B_{\text{tip,c}}=1.51\,\text{T}