A detailed examination of polysilicon resistivity incorporating the grain size distribution

Mikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Enni Snellman, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, Katja Parkkinen, Markus Eklund · 2024

Read A detailed examination of polysilicon resistivity incorporating the grain size distribution by Mikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Enni Snellman, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, Katja Parkkinen, Markus Eklund (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-15784.txt.

Introduction

Mikael Santonen and a large team model polysilicon resistivity with grain structure in two thousand twenty four. Current flow in polysilicon depends on its grain layout. Grains vary in shape and size across real samples. Standard one dimensional models ignore that spread entirely.

Their method adds a Voronoi based resistor network in two dimensions. Grain size data come from growth simulations and lab samples. Wider size spreads cut resistivity by over half in cases. Large grains give current fewer boundaries to cross. Average grain size alone thus misleads resistivity estimates.

Catalog record

CREATORMikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Enni Snellman, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, Katja Parkkinen, Markus Eklund
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-15784

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A detailed examination of polysilicon resistivity incorporating the grain size distribution Mikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Enni Snellman, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, Katja Parkkinen, Markus Eklund Abstract Current transport in polysilicon is a complicated process with many factors to consider. The inhomogeneous nature of polysilicon with its differently shaped and sized grains is one such consideration. We have developed a method that enhances existing resistivity models with a two-dimensional extension that incorporates the grain size distribution using a Voronoi-based resistor network. We obtain grain size distributions both from our growth simulations (700 K, 800 K, and 900 K) and experimental analysis. Applying our method, we investigate the effect that variation in grain size produces with cases of different average grain sizes (2 nm to 3 µm). For example, the resistivity of polysilicon with an average grain size of 175 nm drops from 11 k Ω ⋅ \Omega\,\cdot\, cm to 4.5 k Ω ⋅ \Omega\,\cdot\, cm when compared to conventional one-dimensional modeling. Our study highlights the strong effect of grain size variation on resistivity, revealing that wider distributions result in significant resistivity reductions of up to more than 50%. Due to the larger grains present with a grain size distribution, current transport encounters fewer grain boundaries while the average grain size remains the same resulting in fewer barriers along the current transport path. Incorporating the grain structure into the resistivity modeling facilitates a more detailed and comprehensive characterization of the electrical properties of polysilicon. I Introduction Polysilicon is used to mitigate the harmful parasitic surface conductivity (PSC) in microelectronics radiofrequency applications [ 1 ] . PSC drops the resistivity from the k \Omega range to \Omega range in the high resistivity silicon (HR-Si) substrate near oxide interfaces. Polysilicon film is used between the oxide and the HR-Si to raise the resistivity back to the k \Omega range. However, there is a lack of proper methods to estimate the effect of grain size distribution on the resistivity of polysilicon. The present study deals with extending the existing resistivity works to include the effect of the grain size distribution to the resistivity of polysilicon. We continue along the research line started by Seto [ 2 ] in 1975 and developed further by many other researchers [ 3 , 4 , 5 , 6 , 7 ] . The discontinuities found in polysilicon, in the form of grain boundaries, complicate modeling the current transport process compared to crystalline silicon. The discontinuities result in trapping states and segregation sites [ 8 ] at the grain boundaries which can trap charge carriers and neutralize dopant atoms. They in turn form a potential barrier that impedes carrier transport from one grain to the next. The connection between the resistivity modeling and the experiments has received much attention through four point, Van der Pauw and Hall effect measurements with which the effect of temperature, doping concentration, dopant activation, mobility, etc. on resistivity is compared [ 2 , 3 , 9 , 6 ] . It should be therefore noted that the focus of this work is to extend existing works to incorporate the effects that arise due to the inhomogeneous nature of polysilicon and is predominantly a computational/modeling work. The paper is organized in the following way: first, in Section II we investigate how the grain structures found in our molecular dynamics simulations of polysilicon growth affect the resistivity. We introduce a simple, averaged grain size and boundary thickness estimation with which we estimate the effect of growth temperature on resistivity. We then obtain the grain size distribution from the simulations. Our experimental analysis of polysilicon also provides us with a grain size distribution. The experimental side of the work is the focus of Section III . To investigate the effect of the grain size distribution on resistivity, we have developed a method that extends the existing polysilicon resistivity models. Although the technique is generally valid, we demonstrate its operation to investigate and eliminate parasitic surface conductivity. Details of the method are outlined in Section IV . Section V briefly examines a simpler, alternative approach for investigating the effect of grain size distribution on resistivity. In Section VI , we present our investigations on the effect of grain size distribution on resistivity when compared to one-dimensional, average grain-sized models. II Impact of simulated grain structures on resistivity We have investigated the growth process of polycrystalline silicon films [ 10 , 11 ] using LAMMPS molecular dynamics simulations [ 12 ] to advance the understanding of the effects of growth and its parameters on their electrical properties. Our simulations investigate the very start of the growth (first 10-20 nm) where the initial nucleation and grain structure formation takes place. As such, it should be noted that the grain sizes found in our simulations are significantly smaller than those found in our experimental investigations. We however consider the charge carrier trapping properties of the grain boundaries and the effect of it on the resistivity to be similar regardless of grain size. Since resistivity in polysilicon is largely a grain boundary limited process [ 2 , 3 , 4 ] , the method we present in Section IV has applicability both with our small grain size simulations and the larger grain sizes found at the top of the polysilicon growth. Another caveat worth noting is that because we are simulating a physical growth process with an interatomic potential, the parameters of growth, such as the temperature, are not directly comparable with the parameters found in the typical chemical vapor deposition process. Relevant measures obtained from the simulations are the grain size and grain boundary width. Other variables needed to model polysilicon resistivity, such as dopant concentration, trapping state density, and so on, do not play a direct part in the simulation of polysilicon deposition. At this stage, they are free variables whose influence is investigated. For the resistivity calculations in this section, we use the model by Mandurah [ 4 ] . Following the idea found in the so-called brick layer models [ 13 ] , we create a block model and use it to investigate the effect of different growth parameters on the grain structure and thus on the resistivity. The block model consists of a cubic grain (grain size of W_{g} and resistivity \rho_{g} ) and grain boundary pieces surrounding the grains (width of W_{gb} and resistivity of \rho_{gb} ). Visualization and analysis of the simulations are done in Ovito [ 14 ] . The structural classification algorithm Polyhedral template matching [ 15 ] provides us with the identification between grain atoms and grain boundary atoms. Based on the local atomic neighborhood, it can recognize various ordered structures, such as the diamond structure relevant here for silicon. The proportions of atoms in the crystal structure (grain atoms) and the disordered structure (grain boundary atoms) are obtained. With the percentage of atoms in the grain, the percentage of atoms in the boundaries, and the total volume of the analyzed polylayer, we can find the W_{g} and W_{gb} that satisfy the atom shares found in the simulations. The simulations were done at three different temperatures: 700 K, 800 K, and 900

Read the complete text