Effect of three-orifice baffles orientation on the flow and thermal-hydraulic performance: experimental analysis for net and oscillatory flows
J. Muñoz-Cámara, D. Crespí-Llorens, J.P. Solano, P.G. Vicente · 2024
Read Effect of three-orifice baffles orientation on the flow and thermal-hydraulic performance: experimental analysis for net and oscillatory flows by J. Muñoz-Cámara, D. Crespí-Llorens, J.P. Solano, P.G. Vicente (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-15682.txt.
Introduction
Muñoz-Cámara and co-authors tested baffle orientation in 2024 for boosting heat transfer in tubes. Three-orifice baffles spaced along a tube stir the flow, and whether matching or opposing their turns matters had never been mapped. Net flow, shaking flow, and both together were covered in the experiments.
With plain flow, opposed baffles triggered turbulence earlier, raised friction by about forty percent, and lifted heat transfer up to twenty-seven percent at low flow rates. Under shaking flow, gains held only at low strengths of both flows. Beyond that, friction costs outweigh the benefit. Velocity imaging showed chaotic mixing without short-circuits between baffles, which still suits uses needing plug-like flow.
Catalog record
| CREATOR | J. Muñoz-Cámara, D. Crespí-Llorens, J.P. Solano, P.G. Vicente |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 55 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-15682
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Effect of three-orifice baffles orientation on the flow and thermal-hydraulic performance: experimental analysis for net and oscillatory flows J. Muñoz-Cámara, D. Crespí-Llorens, J.P. Solano, P.G. Vicente Abstract Three-orifice baffles equally spaced along a circular tube are investigated as a means for heat transfer enhancement under net, oscillatory and compound flows. An unprecedented, systematic analysis of the relative orientation of consecutive baffles -aligned or opposed- is accomplished to assess the changes induced on the flow structure and their impact on the thermal-hydraulic performance. The results cover the Nusselt number, the net and oscillatory friction factors and the instantaneous velocity fields using PIV in an experimental campaign with a 32 mm tube diameter. The study is conducted in the range of net Reynolds numbers 50 < R e n < 1000 50<Re_{n}<1000 and oscillatory Reynolds numbers 0 < R e o s c < 750 0<Re_{osc}<750 , for a dimensionless amplitude x 0 / D = 0.5 x_{0}/D=0.5 and P r = 65 Pr=65 . In absence of oscillatory flow, opposed baffles advance the transition to turbulence from R e n = 100 Re_{n}=100 to 50 50 , increasing the net friction factor (40%) for R e n > 50 Re_{n}>50 and the Nusselt number (maximum of 27%) for R e n < 150 Re_{n}<150 . When an oscillatory flow is applied, augmentations caused by opposed baffles are only observed for R e n < 150 Re_{n}<150 and R e o s c < 150 Re_{osc}<150 . Above R e n Re_{n} , R e o s c > 150 Re_{osc}>150 , opposed baffles are not recommended for the promotion of heat transfer, owing to friction penalties. However, the chaotic mixing and lack of short-circuiting between baffles observed with flow velocimetry over a wide range of operational conditions point out the interest of this configuration to achieve plug flow. Journal: Applied Thermal Engineering Nomenclature C Propylene glycol weight concentration, % c_{p} specific heat (J/(kg \cdot K)) d orifice diameter (m) D tube inner diameter (m) f oscillation frequency (Hz) h heat transfer coefficient (W/(m {}^{2}\cdot K)) I electric current (A) k thermal conductivity (W/(m \cdot K)) l cell length (m) L_{h} heated length (m) L_{p} distance between pressure ports (m) L_{v} baffled tube length in PIV facility (m) L_{e,v} entry-outlet length in PIV facility (m) \dot{m} mass flow rate (kg/s) q^{\prime\prime} heat flux, W/m 2 Q_{losses} heat losses, W S open area (-), {(n\cdot d/D)}^{2} T temperature ( ∘ C) u velocity vector (m/s) U instantaneous bulk flow velocity (m/s), based on D U_{n} bulk velocity of the net flow (m/s), based on D V voltage (V) x axial distance from the start of the heated area (m) x_{0} oscillation amplitude, center to peak (m) Greek symbols \beta coefficient of volumetric thermal expansion (1/K) \mu dynamic viscosity (kg/(m \cdot s)) \nu kinematic viscosity (m 2 /s) \rho fluid density (kg/m 3 ) \theta oscillation phase angle ( ∘ ) \Delta t time step between consecutive images (s) \Delta p_{n} net pressure drop (Pa) \Delta p_{max} amplitude of the oscillating pressure drop (Pa) Subscripts b bulk in inlet of the test section j section number k circumferential position number wi inner wall Dimensionless groups f_{n} net Fanning friction factor, \frac{\Delta p_{n}}{2\rho~U_{n}^{2}}~\frac{D}{L_{p}} f_{n} oscillatory Fanning friction factor, \frac{\Delta p_{max}}{2\rho~(2\pi~f~x_{0})^{2}}~\frac{D}{L_{p}} Re_{n} net Reynolds number, \rho U_{n}D/\mu Re_{osc} oscillatory Reynolds number, \rho(2\pi fx_{0})D/\mu \Psi velocity ratio, Re_{osc}/Re_{n} Pr Prandtl number, \mu c_{p}/k Nu Nusselt number, hD/k Ra^{*} Modified Rayleigh number, g\ \rho\ c_{p}\ \beta\ D^{4}\ q^{\prime\prime}/(\nu\ k^{2}) 1 Introduction The superposition of an oscillatory flow to a net flow in a pipe is a well-known means for heat transfer enhancement [ 1 , 2 ] , driven by the increase in wall shear stress and the potential change in flow direction. Heat transfer characteristics of pulsating pipe flows have been a focus of interest in a wide variety of applications, ranging from turbomachinery cooling [ 3 , 4 , 5 ] , cleaning in place for food industry [ 6 ] or heat sinks for electronics cooling [ 7 ] , among others. A comprehensive review of heat transfer enhancement by pulsating flows can be found in [ 8 ] . When this active technique is combined with artificial tube roughness [ 9 , 10 ] or with the use of inserts [ 11 ] , the resulting compound enhancement method provides a significant heat transfer augmentation, remarkably when low net flow velocities yield long residence times in the pipe and laminar flow characteristics exist in the absence of pulsation. In particular, the superposition of net and oscillatory flows in tubular baffled reactors, as a means for achieving plug flow characteristics [ 12 ] , promotes also high tube-side heat transfer coefficients, allowing to accommodate high heat fluxes in chemical reactions that require simultaneous heating or cooling. Nusselt number correlations for the so-called Oscillatory Baffled Reactors (OBRs) were proposed for the first time by Mackley et al. [ 13 ] , taking into consideration the effect of the net flow velocity and the frequency and amplitude of oscillation using the net Reynolds number and the oscillatory Reynolds number. Single-orifice circular baffles were placed inside the tube, allowing for the oscillatory flow to generate a mechanism of cyclic dispersion of vortices upstream and downstream of the periodically-spaced inserts, that were responsible for the high degree of mixing, reduced axial dispersion and heat transfer enhancement. Table 1 collects the details (tested range and geometry under study) of previous experimental studies on thermal-hydraulic aspects of OBRs. Only studies with oscillating flow (instead of oscillating baffles) are presented. Table 1 : Experimental studies on Oscillatory Baffled Reactors Ref. Type of test Re_{n} Re_{osc} x_{0}/D Pr Geometry D(mm) l S [ 14 ] FV, PD 0 300-4000 0.07-0.26 - MH1 25.7 1.5D 0.35 [ 11 ] HT 100-700 200-1600 0.12 124 MH1 12 1.5D 0.34 [ 13 ] PD, HT 150-1000 300-800 0.29-0.57 72 MH1 12 1.5D 0.60 [ 15 ] HT 0 50-1000 0.08-0.47 102 MH1 24 1.5D 0.16 [ 16 ] FV 0 12-560 0.05-2.5 - SPC 4.4 3D 0.13 [ 17 ] FV 0 182-300 0.08 - MH1 50 1.5D 0.25 [ 18 ] HT 100-1000 0-1590 0.21 - MH1 24 1.5D - [ 19 ] FV 0 650-1300 4 - MH3a 60 0.9D 0.24 [ 20 ] HT 200-1400 0-2770 0.23 4.4-9 MH1 26.2 2D 0.25 [ 21 ] HT 10-55 0-200 0.1-0.4 5.4 SPC 5 2.6D 0.16 [ 22 ] PD, HT 10-600 10-440 0.5 190-470 MH3a 32 0.87D 0.25 [ 23 ] FV, HT 20-65 0-650 0.5 150 MH1 32 1.5D 0.25 [ 24 ] PD 0 10-1000 0.14-0.50 - MH1, MH3a 32 1.5D 0.25 [ 25 ] PD 0 4·10 3 -36·10 3 0.025-0.05 - MH3a, MH3o 19.4 0.25D 0.169 Type of test: HT=Heat transfer, PD=Pressure drop, FV=Flow visualization Geometry: MH1: one-orifice baffles, MH3a= three-orifice aligned baffles, MH3o= three-orifice opposed baffles SPC=Smooth Periodic Constrictions The scale-up of single-orifice OBRs, however, showed a reduction of intensity and length-scale of mixing. To overcome this problem, Smith and Mackley [ 26 ] suggested the use of multi-orifice baffles, that would mimic