Progress on Optical Clock Technology for Operational Timescales

S. Peil 1, W. Tobias 2, J. Whalen 2, B. Hemingway 1, T. G. Akin 1 · 2024

Read Progress on Optical Clock Technology for Operational Timescales by S. Peil 1, W. Tobias 2, J. Whalen 2, B. Hemingway 1, T. G. Akin 1 (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-15403.txt.

Introduction

The world's time is kept by clocks, and optical clocks now out-measure every older standard. Peil and co-authors report progress in a 2024 paper on making those laboratory marvels run national timescales, where the demand is not a record measurement but unbroken service for months and years.

The team describes three strands of work. A hybrid clock steers an optical oscillator with an atomic fountain, gaining optical steadiness without losing a long-term anchor. Atomic beam optical clocks are being built for round-the-clock duty beyond the current rubidium fountains at the United States Naval Observatory. An optical lattice clock is in development as the gold-standard reference. The paper is a status report on moving optical timekeeping from experiment to infrastructure.

Catalog record

CREATORS. Peil 1, W. Tobias 2, J. Whalen 2, B. Hemingway 1, T. G. Akin 1
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE16 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-15403

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Progress on Optical Clock Technology for Operational Timescales S. Peil 1, W. Tobias 2, J. Whalen 2, B. Hemingway 1, T. G. Akin 1 Abstract While optical clock technology has advanced rapidly in recent years, incorporating the technology into operational timescales has progressed more slowly. The highest accuracy frequency standards for groundbreaking measurements do not easily translate to critical timing where continuous, uninterrupted operation over many months and years is required. For example, intermittent steering of a hydrogen maser with an optical standard fails to harness all of the dramatic improvements possible with optical technology. Here we present progress on development and integration of optical-clock technology for operational timescales. An optical oscillator steered to an atomic fountain comprises a hybrid clock with optical-level stability at short times and a reliable long-term reference, and obviates the need for a steered maser. Atomic-beam optical clocks are being developed to support 24/7 operations at a level that improves upon the performance of the U.S. Naval Observatory’s rubidium fountains. An optical-lattice is being developed as a gold-standard frequency reference, complementing the role of the atomic beam clocks. 1 Introduction - Operational Timescales Coordinated Universal Time (UTC) is the internationally agreed upon timescale derived from hundreds of atomic clocks maintained across the globe. Frequency standards are used to calibrate the timescale, imposing a fundamental time interval tied to the SI definition of the second and ensuring long-term stability through accurate evaluation of systematic perturbations. Clocks that operate continuously serve as a “flywheel”, maintaining a timing output in between absolute frequency calibrations. Each metrology institute or timing lab maintains a number of clocks that contribute to UTC and also generate a local realization of UTC. This general architecture for UTC and local timescales has been utilized since inception of atomic time a half-century ago. Perhaps the most significant evolution has been the contributing clock technology; thermal beam primary standards have been replaced by laser cooled atomic fountains [ 1 ] , and commercial cesium clocks are now weighted significantly less than hydrogen masers. In the past decade, rubidium fountains at the U.S. Naval Observatory (USNO) have contributed significant weight to UTC as continuous clocks (as opposed to secondary frequency standards), the first cold-atom clocks to contribute in this way [ 2 ] . The recent advent of optical-clock technology has led to the contribution of strontium (Sr) and ytterbium (Yb) optical lattices to UTC as (secondary) frequency standards, with anticipation that other optical-lattice or trapped-ion clocks will contribute in the near future. On the other hand, the complexity of these systems prevents continuous, uninterrupted operation, and besides frequency calibration of a microwave clock (usually a maser), optical clocks have seen limited use in operational timescales. There are currently no optical clocks contributing to UTC as flywheels, and only vapor-cell clocks [ 3 , 4 ] show significant promise as continuous clocks. The limited use of optical clocks in timescales forces the continued use of microwave clocks and associated technology, limiting the timescale performance and capabilities over what is achievable with optical technology. We will discuss several efforts underway at USNO to more fully incorporate optical-clock technology into an operational timescale. 2 Optical Oscillators The use of optical clocks for timing has almost exclusively consisted of an optical-lattice frequency standard intermittently measuring and steering a hydrogen maser [ 5 , 6 ] or ensemble of masers [ 7 ] . This architecture suffers from the lack of a suitable optical flywheel oscillator, relying instead on a proven microwave clock for continuity. Short-term frequency stability is limited by the maser to \sim 10^{-13} at 1 s, and the maser impacts longer-term performance to a degree that depends on the uptime of the lattice. Optical oscillators, consisting of a cavity-stabilized laser and a frequency-comb divider, have matured significantly in recent years and are becoming much more reliable. Fiber frequency combs routinely stay mode-locked for months on end, and the optical phase locks stabilizing the comb and the CW laser are even more robust. The radio-frequency signals generated maintain the frequency stability of the optical signal to a very high degree. While not yet reliable enough to replace masers in critical operations, optical oscillators are poised to find wider use in timing applications in the near future. Working toward an experimental ‘‘maserless’’ timescale, we employ an optical oscillator constructed from telecom-wavelength components. A 1542 nm diode laser is stabilized to a high-finesse cavity made from a ULE spacer, silica mirror substrates and crystalline mirror coatings, resulting in a Hz-level linewidth. A fiber frequency comb centered at 1550 nm and with a 250 MHz repetition rate is phase-locked to the narrow laser and generates RF signals at 10 GHz and 200 MHz 1 1 1 The 4th harmonic of the repetition rate at 1 GHz is divided to generate 200 MHz. via two different opto-electronic pathways. The system has proven to be robust, maintaining locks and producing an uninterrupted RF output for up to 6 months in a poorly regulated lab. We further divide the 200 MHz signal to 5 MHz, the native frequency for many timing systems, and input the signal to our clock measurement system, which measures the scores of atomic clocks that contribute to the USNO timescale. While maintaining optical-clock-level stability when dividing to 5 MHz is not realistic [ 8 ] , the 1 s instability is still well below that of a maser, and, for applications that can support a 200 MHz or higher frequency output, the impact of frequency division is negligible. The optical oscillator exhibits an average frequency drift of 3 kHz/day, with significant nonlinear variations strongly correlated with temperature over shorter times. Since optical frequency standards are not reliable enough for continuous operation, we steer the optical oscillator with a rubidium fountain. The USNO fountains have demonstrated reliable performance over 11 years of continuous operation and contribution to UTC, and an optical oscillator disciplined to an atomic fountain can form an operational clock combining the best of both systems. The USNO rubidium fountains typically exhibit a white-frequency noise level of 1.5 to 2\times 10^{-13} when a quartz crystal drives the microwave frequency chain. By instead using the 200 MHz signal generated from our optical oscillator, fountain performance can be improved, approaching more closely the quantum-projection noise limit that is as low as 5\times 10^{-14} in some of our systems. We average the frequency difference between the optical oscillator and fountain and feedback to the frequency-comb repetition rate to produce the steered output. This hybrid clock can be expected to exhibit an Allan deviation curve like that illustrated in Figure 1 . Short-term stability governed by the local oscillator can be as low as 10^{-15} for the 10 GHz output, though degradation to 10^{-14} is expected when dividing to 5 MHz. The optical oscillator’s frequency drift intersects the fountain’s integration at about 40 s, after which the hybrid clock integrates as a fountain, shown with a white-frequency noise level of 6\times 10^{-14} . The frequency stability of the hybrid clock should be better than 10^{-14} for all averaging times, which would be a significant improvement over the short-term performance achievable with a maser-based timescale. Figure 1: Modeled behavior of hybrid optical-microwave clock. Solid and

Read the complete text